Cat Command for Excavating is a remote control option that contributes to jobsite safety by allowing operators to run an excavator remotely in hazardous applications.
To watch these videos, you will need to accept the use of targeting cookies.Cookies
When used in a potentially hazardous application, remote control allows the operator to dig, lift, and track from a safe working distance.
Lower potential injuries from slips, trips and falls when climbing on and off machines.
Remove operator risk from machine rollover or sliding.
For added security, only one operator interface can control the excavator at a time.
Enhance Productivity
Restart production immediately following disruptive processes, such as blasting in quarry applications.
Operators can quickly and easily switch between Cat Command installed machines, and change jobsite locations, with no downtime.
Improve productivity and reduce operator fatigue by eliminating the effects of vibration and sound.
Control the machine with the same response time as sitting in the cab.
Allow operators who have had medical concerns to return to work and operate machines earlier.
Cat Command Console
Available for select Cat dozers, excavators, and wheel loaders.
Operators work safely and comfortably off the machine while remaining on-site and having direct visual contact.
Provides line-of-sight operation from up to 400 meters (437 yds.) away.
Controls are fully integrated with machine electronics to provide the same control and response as if operating from the cab.
Does not require any on-site communications infrastructure.
Uses either a 900 MHz or 2.4 GHz frequency communications protocol.
View comprehensive machine information including engine rpm, fuel level, hydraulic temperature, engine temperature, aftertreatment status, operation modes, pressures, and machine warnings through the LCD display.
The machine will shut down if the controller is tipped more than 45 degrees, indicating that the operator has fallen.
NOTE: Command Console is unavailable in Europe, Australia, or New Zealand.
When used in a potentially hazardous application, remote control allows the operator to dig, lift, and track from a safe working distance.
Lower potential injuries from slips, trips and falls when climbing on and off machines.
Remove operator risk from machine rollover or sliding.
For added security, only one operator interface can control the excavator at a time.
Enhance Productivity
Restart production immediately following disruptive processes, such as blasting in quarry applications.
Operators can quickly and easily switch between Cat Command installed machines, and change jobsite locations, with no downtime.
Improve productivity and reduce operator fatigue by eliminating the effects of vibration and sound.
Control the machine with the same response time as sitting in the cab.
Allow operators who have had medical concerns to return to work and operate machines earlier.
Cat Command Console
Available for select Cat dozers, excavators, and wheel loaders.
Operators work safely and comfortably off the machine while remaining on-site and having direct visual contact.
Provides line-of-sight operation from up to 400 meters (437 yds.) away.
Controls are fully integrated with machine electronics to provide the same control and response as if operating from the cab.
Does not require any on-site communications infrastructure.
Uses either a 900 MHz or 2.4 GHz frequency communications protocol.
View comprehensive machine information including engine rpm, fuel level, hydraulic temperature, engine temperature, aftertreatment status, operation modes, pressures, and machine warnings through the LCD display.
The machine will shut down if the controller is tipped more than 45 degrees, indicating that the operator has fallen.
NOTE: Command Console is unavailable in Europe, Australia, or New Zealand.
Cat Command Station
Available for select Cat dozers, excavators and wheel loaders.
Enables the operator to work remotely in a comfortable, seated “virtual cab” with familiar controls and machine displays.
Can be located in a command center onsite or many miles away.
Reduces operator fatigue with a comfortable indoor working environment.
Operator inputs are sent directly to the machine electronics via a dedicated radio transmitter/receiver, resulting in real-time implement control.
Controls deliver the same response time as in the cab, maintaining precise control for all excavator applications.
High-quality video delivers a clear view of the work area.
Operators can easily switch between machines, or change jobsites with no downtime.
Enables trainers to stand beside an operator, without noise or movement.
Get Started With Cat Command
Cat Command is designed exclusively for – and deeply integrated into – select Cat machines, resulting in system reliability and durability.
Select Cat Command models include easy-to-install Command kits.
Cat Command can be retro-installed on certain existing Cat machines.
* Talk to your Cat dealer for more information about Cat Command.
Data not available.
Related Products
Units:
Demolition Excavators
Cat® demolition excavators are purpose built for the rigor of demolition applications. With specialized cabs, straight boom and ultra high reach configurations, and a full line of matching demolition attachments, Cat demolition excavators are ready to help you tear through your next job.
Their power, speed, and fuel efficiency make Cat® large excavators the right machine for bulk excavation applications. With powerful, yet efficient engines, advanced hydraulic systems, factory equipped technology, and matching attachments, these machines will help you complete your large-scale projects on time and within budget.
Their size make Cat® mid-size excavators easy to transport to the jobsite. With ample power, exclusive factory-equipped technology, comfortable cabs, simple maintenance and matching Cat attachments, Cat mid-size excavators will help you complete larger projects at a lower cost.