Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.
Flywheel Power - Tractor/Scraper | — |
Scraper Capacity - Heaped | — |
Top Speed - Loaded | — |
• Up to 12% improvement in productivity.
• Advanced productivity electronic control system (APECS) allows
the engine and transmission to communicate on a high level. This
communication allows the machine to better utilize the power and torque the engine is producing. The net result is moving more material.
• Use ground speed control to set the desired top speed and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn.
• The machine speed limit feature replaces top gear selection,
allowing the machine to find the correct gear that works best for
the engine and transmission. Pulling the load in the correct gear, in
most cases, results in lower engine load factor and lower fuel burn.
• Auto-stall assists in quickly bringing the transmission to an
operating temperature at startup when the machine is working in a
cold climate region.
• Cat Payload Estimator for scrapers is an earthmoving solution for optimal payload and jobsite efficiency. Payload Estimator achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Payload Estimator is optimized to be used with sequence assist, which provides increased productivity with less operator effort. Payload Estimator is an automatic feature when ordered with sequence assist.
• Reduce up to 14 individual operator commands per cycle with sequence assist (optional attachment).
• Steer with less effort using the newly designed high-pressure
steering system.
• Enjoy interior improvements and a more ergonomic work environment with a 21% larger cab than the G Series cab.
• Intuitive, ergonomic controls keep operators focused on their work.
• Maintain desired cab temperature with automatic temperature control.
• Get in and out of the cab easier with the new powered access ladder system (optional attachment).
• Enhance an operator’s awareness of site surroundings with the optional work area vision system (WAVS).
• Seat belt indicator provides visual and audible alerts when the seat
belt is not in use.
• Advanced cushion hitch allows the cushion hitch to prevent end stroke by having the ability to predict end stroke events and manage the rate of dampening, resulting in reduced hitch maintenance and improved operator ride in rough conditions.
• Easy ground level access to fuel, water, and engine oil.
Tires - Scraper | 37.25R35**E3 |
Rated Load | 37 200 kg (82,200 lb); 37.2 tonnes (41.1 tons) |
Scraper Capacity - Struck | — |
Tires - Tractor | 37.25R35**E3 |
Maximum Depth of Cut | — |
Width - Cut | — |
Scraper Capacity - Heaped | — |
Overall Width | — |
Top Speed - Loaded | — |
Fuel Tank Refill Capacity - Scraper | — |
Overall Shipping Height | — |
180° Curb-to-Curb Turning Width | — |
Maximum Depth of Spread | — |
Flywheel Power - Tractor | — |
Rated Engine RPM - Tractor | — |
Engine Model - Tractor | Cat C18 |
Emissions | Cat C18 engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. |
Flywheel Power - Tractor/Scraper | — |
Scraper Capacity - Heaped | — |
Top Speed - Loaded | — |
Fuel Tank | — |
Hydraulic System | — |
Diesel Exhaust Fluid (DEF) | — |
Cooling System | — |
Crankcase - Tractor | — |
Transmission System | — |
Front of Tractor to Front Axle | — |
Axle to Vertical Hitch Pin | — |
Wheel Base | — |
Rear Axle - Rear of Machine | — |
Height - Scraper Blade Maximum | — |
Ground Clearance - Tractor | — |
Length - Overall Machine - Standard | — |
Length - Maximum (Push-Pull) | — |
Width - Tractor | — |
Height - Top of Cab | — |
Width - Rear Tire Centers | — |
Width - Overall Machine | — |
Width - Outside Rear Tires | — |
Width - Inside of Bowl | — |
Height - Overall Shipping | — |
Overall Length | — |
Operating Weight - Empty | — |
Overall Length - With Bail Down | — |
Operating Weight - Empty | — |
ROPS/FOPS | ROPS/FOPS meet “ISO Standards.” |
Exterior Sound Level | The exterior sound power level for the standard machine (ISO 6393) is 111.5 dB(A). |
Steering System | ISO 5010:2007 |
Reverse Alarm | ISO 9533:2010 |
Seat Belt | SAE J386:FEB2006 |
Falling Object Protective Structure (FOPS) | ISO 3449:2005 Level II |
Brakes | ISO 3450:2011 |
Rollover Protection Structure (ROPS) | ISO 3471:2008 for up to 21 282 kg (46,919 lb) |
Transmission Gear - Sixth | — |
Transmission Gear - Seventh | — |
Transmission Gear - Reverse | — |
Transmission Gear - Fourth | — |
Transmission Gear - Eighth | — |
Transmission Gear - First | — |
Transmission Gear - Fifth | — |
Transmission Gear - Third | — |
Transmission Gear - Second | — |
Bowl Lower | — |
Bowl Raise | — |
Bail Raise | — |
Ejector Retract | — |
Bail Lower | — |
Apron Lower | — |
Ejector Extend | — |
Apron Raise | — |
• Up to 12% improvement in productivity.
• Advanced productivity electronic control system (APECS) allows
the engine and transmission to communicate on a high level. This
communication allows the machine to better utilize the power and torque the engine is producing. The net result is moving more material.
• Use ground speed control to set the desired top speed and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn.
• The machine speed limit feature replaces top gear selection,
allowing the machine to find the correct gear that works best for
the engine and transmission. Pulling the load in the correct gear, in
most cases, results in lower engine load factor and lower fuel burn.
• Auto-stall assists in quickly bringing the transmission to an
operating temperature at startup when the machine is working in a
cold climate region.
• Cat Payload Estimator for scrapers is an earthmoving solution for optimal payload and jobsite efficiency. Payload Estimator achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Payload Estimator is optimized to be used with sequence assist, which provides increased productivity with less operator effort. Payload Estimator is an automatic feature when ordered with sequence assist.
• Reduce up to 14 individual operator commands per cycle with sequence assist (optional attachment).
• Steer with less effort using the newly designed high-pressure
steering system.
• Enjoy interior improvements and a more ergonomic work environment with a 21% larger cab than the G Series cab.
• Intuitive, ergonomic controls keep operators focused on their work.
• Maintain desired cab temperature with automatic temperature control.
• Get in and out of the cab easier with the new powered access ladder system (optional attachment).
• Enhance an operator’s awareness of site surroundings with the optional work area vision system (WAVS).
• Seat belt indicator provides visual and audible alerts when the seat
belt is not in use.
• Advanced cushion hitch allows the cushion hitch to prevent end stroke by having the ability to predict end stroke events and manage the rate of dampening, resulting in reduced hitch maintenance and improved operator ride in rough conditions.
• Easy ground level access to fuel, water, and engine oil.
• The spacious cab features easy, intuitive controls and excellent
visibility. The cab provides a comfortable working environment for
all-day operation.
• Cat advanced ride management (ARM) seat suspension reduces
end stroke movement of the load cylinder for a smoother ride.
• Engine overspeed protection will automatically engage with no
operator input when the machine is in eighth gear. The machine will assist in slowing the machine speed by canceling the throttle command and engaging the engine compression brake.
Data not available.