The Cat 725C2, with a 15 m3 (19.6 yd3) 24 tonnes (26.5 tons) capacity, offers proven reliability, durability, high productivity, superior operator comfort and lower operating costs. Updating the 725C to include all axle enclosed wet brakes and Automatic Traction Control makes the 725C2 the best option for our customers. Class leading levels of performance and operator comfort make for a productive machine all day long.
Engine Model | Cat C9.3 |
Rated Payload | — |
Heaped (SAE 2:1) | — |
Engine Model | Cat C9.3 |
Bore | — |
Stroke | — |
Displacement | — |
Gross Power - SAE J1995 | — |
Peak Engine Torque Speed | — |
Net Power - ISO 14396 | — |
Net Power - SAE J1349 | — |
Peak Engine Torque Net (SAE J1349) | — |
No Engine De-rating Below | — |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat® C9.3 |
Peak Engine Torque Gross (SAE J1995) | — |
Emissions | The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. |
Note (4) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
Note (3) | Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions. |
Note (1) | The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. |
Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
Rated Payload | — |
Heaped (SAE 2:1) | — |
Struck | — |
Tailgate Heaped SAE 2:1 | — |
Tailgate Struck | — |
Forward - 1 | — |
Forward - 2 | — |
Forward - 3 | — |
Forward - 4 | — |
Forward - 5 | — |
Forward - 6 | — |
Reverse - 1 | — |
Interior Cab | — |
Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |
Front Axle - Rated Load | — |
Front Axle - Loaded | — |
Front Axle - Empty | — |
Center Axle - Loaded | — |
Rear Axle - Loaded | — |
Center Axle - Rated Load | — |
Total - Empty | — |
Total - Rated Load | — |
Rear Axle - Rated Load | — |
Total - Loaded | — |
Rear Axle - Empty | — |
Center Axle - Empty | — |
Fuel Tank | — |
Cooling System | — |
Hydraulic System | — |
Engine Crankcase | — |
Transmission | — |
Final Drives/Differential | — |
Output Transfer Gear Box | — |
DEF Tank | — |
Raise Time | — |
Lower Time | — |
Lock to Lock | 4.75 seconds @ 60 rpm |
Brakes | ISO 3450 – 2011 |
Cab - FOPS | ISO 3449 Level II – 2005 |
Cab - ROPS | ISO 3471 – 2008 |
Steering | ISO 5010 – 2007 |
Type | High strength Brinell HB450 wear resistant steel |
Turning Dimensions - SAE Turning Radius | — |
Turning Dimensions - Aisle Width | — |
Turning Dimensions - Clearance Radius | — |
Note | Dimensions are for machines equipped with 23.5R25 tires. |
Turning Dimensions - Steer Angle - Left/Right | 45° |
Turning Dimensions - Inside Radius | — |
Data not available.