Cat® LHDs are engineered to access low seam operations.
Height | 1600 mm (67 in) |
Load Capacity | 6 tonnes (6.6 tons) |
Power Type | Diesel, Turbocharged, and 4 Cycle |
Height | 1600 mm (67 in) |
Load Capacity | 6 tonnes (6.6 tons) |
Power Type | Diesel, Turbocharged, and 4 Cycle |
Bucket Payload | up to 6000 kg (up to 13,227 lb) |
Maximum Braked Trailer Mass | Consult Caterpillar |
RAS Forks - Maximum Payload 600 mm (23.6 in) Load from Fork Face | up to 6000 kg (up to 13,227 lb) |
Heaped Capacity (SAE) | — |
Struck Capacity | — |
Unladen with Full Tanks and Bucket | — |
Laden with Forks and 6 tonnes (6.61 tons) Load | — |
Low Idle | — |
High Idle | — |
Starter Motor Type | Air |
Type | Dry |
Intake Dual Element Type | Primary and Secondary |
Exhaust Flame Trap | Replaceable China and RSA |
Type | Flameproof Wet |
Aftertreatment | Catalytic Exhaust Purifier |
Make | Caterpillar |
Exhaust Filter | Replaceable Element Except China |
Speeds - Forward and Reverse | 4 |
Type | Power Shift with Forward/Reverse Modulation |
Make/Model | 5 Piece (Heavy Duty) |
Size (1) | 17.5 × 25 L3 |
Load/Speed Rating | Maximum 6 km/h (3.7 mph) when loaded 6 tonnes (6.6 tons) |
Inflation Media | Air |
Ply Rating | Radial |
Size (2) | 14.00 × 24 L3 |
Common Return | Tank Mounted, 25 Micron, Replaceable with Bypass |
Auxiliary System | Pressure 10 Micron |
Steer/Brake System | Pressure 10 Micron |
Bucket/PTO System | Pressure 10 Micron |
Degrees of Turn Either Side | 43 Degree |
Degrees Up and Down from Horizontal | 8 Degree |
Type | Ball Bearing at Articulation |
Type | Cross-seated |
Suspension | Adjust Spring/Shock Absorber |
Type | Cab to (MDG1) |
Type | Approved Flameproof |
Voltage | — |
Number/Location | 2 Front, 2 Rear |
Type | Flameproof |
Type | Flameproof |
Drive | Hydraulic |
Compressor Type | Piston Engine Gear Driven |
Governed Pressure | — |
Relief Pressure | — |
Air Receiver Volume | — |
Front to Rear | 1:4 |
Side to Side (Empty) RAS Raised 300 mm (0.98 ft) from Floor | 1:4 |
Side to Side (Laden Bucket Load Fully Raised) | 1:8 |
Fuel Tank | — |
Water Make Up Tank | — |
Axle Oil - Each | — |
Engine Crankcase Oil - With Filter | — |
Transmission | — |
Converter Oil | — |
Main Air Receiver | — |
Hydraulic Tank | — |
Engine Cooling System Water | — |
Maximum Torque Tested | 585 N·m (431 lb-ft) @ 1,400 rpm |
Displacement | — |
Type | Diesel, Turbocharged, and 4 Cycle |
Cooling System | Water Based Radiator |
Maximum Power Tested | 117 kW (157 hp) @ 2,200 rpm |
Cooling Fan | Hydraulic Driven Fan |
Engine Make/Model | MWM |
Type | Mounted on Engine, Single Element |
Differential Type | Bevel Gear and Pinion |
Type | Inboard Planetary |
1st Gear - Maximum | — |
4th Gear - Maximum | — |
2nd Gear - Maximum | — |
3rd Gear - Maximum | — |
Reference | Refer to engineering for information dependant on the applications. |
Data not available.