When used in combination with the CL210 and CL215 LHD machines, the SH150 is the most cost-effective solution for mines that require equipment that performs multiple tasks. Features include fifth-wheel connection attachment, optional power assist for inconsistent floor conditions, hydraulics for raising and lowering the trailer body, hydraulic loading and unloading cylinders and SAHR fail safe brakes.
Height | 1870 mm (73.6 in) |
Load Capacity | 50 tonnes (55 tons) |
Frame Oscillation | — |
With spring-applied hydraulic brakes and solid rubber wheels, the trailer is hydraulically lowered and raised for easy loading and unloading of transport. The trailer has a capacity of 30 000 or 50 000 kg (66,139 or 110,231 lb) and can carry a 2 m (6.56 ft) roof support. The SH150 can be towed by the CL210 and CL215. Contact your local Caterpillar representative for further information on the SH150. If you have a specific job task requirement or an attachment that is not listed, let Caterpillar assist by developing a solution for and with you.
Height | 1870 mm (73.6 in) |
Load Capacity | 50 tonnes (55 tons) |
Frame Oscillation | — |
Maximum Speed with Load | — |
Pull Winch Rated At | 20 tonnes (22 tons)/30 tonnes (33 tons) |
Gradients Possible (Gradient Data Short-Term Only) | 14.5° continuous |
Vehicle Length | — |
Steering Articulation | — |
Turn Radius - Outside | — |
Carry Capacity | — |
Vehicle Width | — |
Maximum Speed | — |
Ground Clearance | — |
Hydraulics | Quick connect PTO couplings from the towing vehicle |
Unload | 2 × hydraulic cylinders in stops |
Motor/Engine | Trailer |
Support Mass (reference Caterpillar for load/braking restrictions) | Up to 55 000 kg (Up to 121,254 lb) |
Support Width (reference trailer widths) | 1750 mm (68.9 in) and 2000 mm (78.7 in) |
Trailer Mass | — |
Winch Capacity - Standard | — |
Winch Rope | Flat platted type or optional Kevlar Blue |
Winch Capacity - Optional | — |
Unloaded | — |
Loaded | — |
Width - Overall Over Wheels | — |
Length - End to 5th Wheel Pivot | — |
Height - Travel Position | — |
Ground Clearance - Lifted | — |
Height - To Top of Wheel Arch Lifted | — |
Height - To Top of Guard Lifted | — |
Length - Center of Wheel to 5th Wheel Pivot | — |
Width - Inside | — |
Height - To Top of 5th Wheel Loaded | — |
Length - 5th Wheel Stand Off | — |
Length - End to 5th Wheel Mount | — |
Length - Overall | — |
Length - 5th Wheel Stand Off | — |
Length - Overall | — |
Height - To Top of Wheel Arch Lifted | — |
Length - End to 5th Wheel Mount | — |
Length - Center of Wheel to 5th Wheel Pivot | — |
Height - To Top of 5th Wheel Loaded | — |
Height - Travel Position | — |
Ground Clearance - Lifted | — |
Width - Inside | — |
Height - To Top of Guard Lifted | — |
Width - Overall Over Wheels | — |
Length - End to 5th Wheel Pivot | — |
Length - Center of Wheel to 5th Wheel Pivot | — |
Height - Travel Position | — |
Width - Inside | — |
Height - To Top of Guard Lifted | — |
Width - Overall Over Wheels | — |
Length - Overall | — |
Height - To Top of 5th Wheel Loaded | — |
Length - 5th Wheel Stand Off | — |
Length - End to 5th Wheel Mount | — |
Height - To Top of Wheel Arch Lifted | — |
Ground Clearance - Lifted | — |
Length - End to 5th Wheel Pivot | — |
Length - Overall | — |
Ground Clearance - Lifted | — |
Length - End to 5th Wheel Mount | — |
Width - Inside | — |
Length - 5th Wheel Stand Off | — |
Length - End to 5th Wheel Pivot | — |
Height - To Top of 5th Wheel Loaded | — |
Width - Overall Over Wheels | — |
Height - To Top of Wheel Arch Lifted | — |
Height - Travel Position | — |
Height - To Top of Guard Lifted | — |
Length - Center of Wheel to 5th Wheel Pivot | — |
Height - Travel Position | — |
Length - Center of Wheel to 5th Wheel Pivot | — |
Length - End to 5th Wheel Mount | — |
Height - To Top of Guard Lifted | — |
Width - Overall Over Wheels | — |
Width - Inside | — |
Height - To Top of Wheel Arch Lifted | — |
Length - End to 5th Wheel Pivot | — |
Height - To Top of 5th Wheel Loaded | — |
Ground Clearance - Lifted | — |
Length - 5th Wheel Stand Off | — |
Length - Overall | — |
Width - Inside | — |
Height - To Top of Guard Lifted | — |
Length - Overall | — |
Ground Clearance - Lifted | — |
Height - To Top of 5th Wheel Loaded | — |
Width - Overall Over Wheels | — |
Length - End to 5th Wheel Mount | — |
Height - To Top of Wheel Arch Lifted | — |
Length - Center of Wheel to 5th Wheel Pivot | — |
Length - 5th Wheel Stand Off | — |
Length - End to 5th Wheel Pivot | — |
Height - Travel Position | — |
With spring-applied hydraulic brakes and solid rubber wheels, the trailer is hydraulically lowered and raised for easy loading and unloading of transport. The trailer has a capacity of 30 000 or 50 000 kg (66,139 or 110,231 lb) and can carry a 2 m (6.56 ft) roof support. The SH150 can be towed by the CL210 and CL215. Contact your local Caterpillar representative for further information on the SH150. If you have a specific job task requirement or an attachment that is not listed, let Caterpillar assist by developing a solution for and with you.
Data not available.