The Cat® 304.5E2 XTC Mini Excavator is the first model in the Xtra Tool Carrier (XTC) lineup and delivers efficient performance, durability and versatility in a compact design.
Net Power | — |
Operating Weight | — |
Dig Depth | — |
Net Power | — |
Engine Model | Cat C2.4 |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | — |
Stroke | — |
Bore | — |
Displacement | — |
Emissions | Meets U.S. EPA Tier 4 Final/EU Stage IIIA emission standards. |
Gross Power - ISO 14396 | — |
Operating Weight | — |
Weight - Canopy, Standard Stick | — |
Weight - Cab, Long Stick | — |
Note | Weight includes counterweight, rubber tracks, bucket, operator, full fuel and auxiliary lines. |
Weight - Canopy, Long Stick | — |
Weight - Cab, Standard Stick | — |
Travel Speed - High | — |
Travel Speed - Low | — |
Maximum Traction Force - High Speed | — |
Maximum Traction Force - Low Speed | — |
Ground Pressure - Cab Standard Stick | — |
Ground Pressure - Canopy Long Stick | — |
Gradeability - Continuous Operation | 20° |
Ground Pressure - Cab Long Stick | — |
Ground Pressure - Canopy Standard Stick | — |
Gradeability - Maximum | 30° |
Digging Force - Stick - Standard | — |
Digging Force - Stick - Long | — |
Operating Pressure - Travel | — |
Pump Flow at 2,200 rpm | — |
Operating Pressure - Swing | — |
Auxiliary Circuit - Primary (245 bar/3,553 psi) | — |
Auxiliary Circuit - Secondary (174 bar/2,524 psi) | — |
Operating Pressure - Equipment | — |
Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
Digging Force - Bucket | — |
Machine Swing Speed | — |
Boom Swing - Left - With Stop* | 55° |
Boom Swing - Right | 50° |
Boom Swing - Left - Without Stop* | 80° |
Note | *Automatic swing brake, spring applied, hydraulic release. |
Width | — |
Height | — |
Dig Depth | — |
Lift Height | — |
Cooling System | — |
Engine Oil | — |
Hydraulic Tank | — |
Fuel Tank | — |
Hydraulic System | — |
Dig Depth | — |
Maximum Reach | — |
Tail Swing | — |
Swing Bearing - Height | — |
O/A Shipping Height | — |
Maximum Reach - Ground Level | — |
Boom Swing - Left | — |
Maximum Blade Depth | — |
Maximum Dig Height | — |
O/A Shipping Length | — |
Boom In Reach | — |
Maximum Dump Clearance | — |
Vertical Wall | — |
Boom Swing - Right | — |
Track Belt/Shoe Width | — |
O/A Track Width | — |
Maximum Blade Height | — |
O/A Undercarriage Length | — |
Boom Height - Shipping Position | — |
Tail Swing | — |
Maximum Dump Clearance | — |
Maximum Blade Depth | — |
Boom Swing - Left | — |
O/A Track Width | — |
Maximum Reach | — |
Maximum Reach - Ground Level | — |
Boom Swing - Right | — |
Boom Height - Shipping Position | — |
Swing Bearing - Height | — |
Dig Depth | — |
O/A Undercarriage Length | — |
Boom In Reach | — |
Track Belt/Shoe Width | — |
O/A Shipping Length | — |
Vertical Wall | — |
Maximum Blade Height | — |
Maximum Dig Height | — |
O/A Shipping Height | — |
Blade Down - Side | — |
Note | *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart. |
Blade Up - Side | — |
Blade Down - Front | — |
Blade Up - Front | — |
Blade Up - Side | — |
Blade Down - Side | — |
Blade Up - Front | — |
Blade Down - Front | — |
Note | *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart. |
Rack Back Angle - Maximum Height - 1829 mm (72 in) MP Bucket | 48° |
Breakout Force - Tilt - 1829 mm (72 in) MP Bucket | — |
Lift Capacity - 1829 mm (72 in) MP Bucket | — |
Note | *Rated operating capacity based on hydraulic limit (ROC is the smaller of the hydraulic limit or 50% of the static tipping load). |
Lift Capacity - 1070 mm (42 in) Forks | — |
Maximum Height - 1829 mm (72 in) MP Bucket with Cutting Edge | — |
Breakout Force - Lift - 1829 mm (72 in) MP Bucket | — |
Rated Operating Capacity* - Ground - 1829 mm (72 in) MP Bucket | — |
Maximum Dump Angle - 1829 mm (72 in) MP Bucket | 27° |
Rated Operating Capacity* - Maximum Height - 1829 mm (72 in) MP Bucket | — |
Reach - Maximum Lift/Dump - 1829 mm (72 in) MP Bucket | — |
Blade Down - Front | — |
Blade Up - Side | — |
Blade Up - Front | — |
Blade Down - Side | — |
Note | *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart. |
Machine Overhang | — |
Stick Length - Standard | — |
Stick Length - Long | — |
Blade Down - Front | — |
Blade Up - Side | — |
Blade Up - Front | — |
Blade Down - Side | — |
Note | *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart. |
Track Roller Type | Center Flange |
Number of Carrier Rollers | 1 |
Number of Track Rollers | 4 |
Exterior Sound Power Level - ISO 6395:2008* | — |
Dynamic Operator Sound Pressure Level (ISO 6396:2008) | — |
Note | *European Union Directive “2000/14/EC” |
Roll Over Protective Structure (ROPS) | ISO 12117-2 |
Tip Over Protective Structure (TOPS) | ISO 12117 |
Top Guard | ISO 10262 (Level I) |
Data not available.