Mobile Scrap & Demolition Shears

Cat^® Shear Highlights

A bolt-on piercing tip provides piercing capability at low operating cost. The piercing tip is fully reversible, giving two uses per blade set.
The unique straight lower jaw design effectively enhances the cutting force by facilitating the spreading out of steel along the length of the jaw, maximizing the shear cutting force.
360 degree rotation will allow for greater productivity because of the speed and ease with which the shear jaws can be placed in optimum cutting position.
The four main, side and front knives are fully reversible with four effective cutting edges.
Large access panels on the top, bottom, and sides of the shear housing make it easier to service inside components.
Design of the shear housing provides full protection of the cylinder throughout the complete cutting cycle.
Only Caterpillar offers an integrated machine-hydraulics-shear system supported by Caterpillar from front to end, throughout the life of the system.

Units:

Model	Tip Force	Rotation	Jaw Opening
S308	—43.3 Sh Ton385 kN	360 Degrees	—9.4 in240 mm
S3015 Rotating Scrap & Demolition Shear	—69 ton-f618 kN	—	—15.7 in400 mm
S3025 Rotating Scrap & Demolition Shear	—110 ton-f980 kN	—	—18 in458 mm
S3035 Rotating Scrap & Demolition Shear	—149 ton-f1328 kN	—	—22 in560 mm
S3050 Rotating Scrap & Demolition Shear	—187 ton-f1667 kN	—	—26.8 in681 mm
S2050 Straight Scrap & Demolition Shear	—187 ton-f1667 kN	—	—26.8 in681 mm
S3070 Rotating Scrap & Demolition Shear	—237 ton-f2110 kN	—	—32.2 in819 mm
S2070 Straight Scrap & Demolition Shear	—237 ton-f2110 kN	—	—32.2 in819 mm
S3090 Rotating Scrap & Demolition Shear	—282 ton-f2513 kN	—	—35.8 in910 mm
S2090 Straight Scrap & Demolition Shear	—282 ton-f2513 kN	—	—35.8 in910 mm

Data not available.