/  Technology  /  Command  /  Command

Cat Command for Dozing in ConstructionNon-Current

Cat Command for Dozing in Construction

Overview

Cat Command remote control technology provides full dozer maneuverability from a safe distance when working in hazardous environments. Command offers the choice of line-of-sight consoles or long-distance operator stations (non-line-of-sight). By removing the operator from the cab, it eliminates machine vibration, reducing fatigue.

Benefits & Features

Work at a Safe Distance

    • Command is a remote control ready dozing option that contributes to job site safety by allowing operators to run a bulldozer remotely in hazardous mining and earthmoving applications.
    • Helps protect operators in jobs like overburden/reclamation work, highwall or stockpile management, ripping overburden or leach pads, slurry pond dozing and operation around hazardous materials or unstable surfaces.
    • Lower potential injuries from slips, trips and falls when climbing on and off machines.
    • Optional Commandfor Dozing is deeply integrated with Cat machine systems to enable smooth, precise control for maximum efficiency and productivity.

Enhance Productivity

    • Operators can quickly and easily switch between Cat Command installed machines, and change jobsite locations, with no downtime.
    • Reduce operator fatigue by eliminating the in-cab effects of vibration, noise, and rough terrain.
    • Control the machine with the same response time as sitting in the cab.
    • Select and activate machine features from the Command Station as though the operator was in the machine.
    • Allow operators who have had medical concerns to return to work and operate machines earlier.

CAT COMMAND CONSOLE

    • Available for select Cat dozers, excavators, and wheel loaders.
    • Allows operator to be positioned for optimal visibility with a 400 meter (437 yd) range.
    • Switch easily between manual or remote mode for versatile operation in all applications.
    • Operator inputs are sent directly to the machine electronics via a dedicated radio transmitter/receiver, resulting in real-time implement control.
    • Does not require any on-site communications infrastructure.
    • Uses 2.4 GHz frequency communications protocol.
    • The machine will shut down if the controller is tipped more than 45 degrees, indicating that the operator has fallen.

    NOTE: Command Console is unavailable in Europe, Australia, or New Zealand.

  October 25, 2024

Specifications

Units: 

Benefits & Features

Work at a Safe Distance

    • Command is a remote control ready dozing option that contributes to job site safety by allowing operators to run a bulldozer remotely in hazardous mining and earthmoving applications.
    • Helps protect operators in jobs like overburden/reclamation work, highwall or stockpile management, ripping overburden or leach pads, slurry pond dozing and operation around hazardous materials or unstable surfaces.
    • Lower potential injuries from slips, trips and falls when climbing on and off machines.
    • Optional Commandfor Dozing is deeply integrated with Cat machine systems to enable smooth, precise control for maximum efficiency and productivity.

Enhance Productivity

    • Operators can quickly and easily switch between Cat Command installed machines, and change jobsite locations, with no downtime.
    • Reduce operator fatigue by eliminating the in-cab effects of vibration, noise, and rough terrain.
    • Control the machine with the same response time as sitting in the cab.
    • Select and activate machine features from the Command Station as though the operator was in the machine.
    • Allow operators who have had medical concerns to return to work and operate machines earlier.

CAT COMMAND CONSOLE

    • Available for select Cat dozers, excavators, and wheel loaders.
    • Allows operator to be positioned for optimal visibility with a 400 meter (437 yd) range.
    • Switch easily between manual or remote mode for versatile operation in all applications.
    • Operator inputs are sent directly to the machine electronics via a dedicated radio transmitter/receiver, resulting in real-time implement control.
    • Does not require any on-site communications infrastructure.
    • Uses 2.4 GHz frequency communications protocol.
    • The machine will shut down if the controller is tipped more than 45 degrees, indicating that the operator has fallen.

    NOTE: Command Console is unavailable in Europe, Australia, or New Zealand.

CAT COMMAND STATION

    • Available for select Cat dozers, excavators and wheel loaders.
    • Remote operator station is set up similarly to a dozer cab, providing an ergonomic, seated position and familiar control layout.
    • Can be located in a command center onsite or many miles away.
    • Reduces operator fatigue with a comfortable indoor working environment.
    • Operator inputs are sent directly to the machine electronics via a dedicated radio transmitter/receiver, resulting in real-time implement control.
    • Controls deliver the same response time as in the cab, maintaining precise control for all excavator applications.
    • High-quality video delivers a clear view of the work area.
    • Operator sees visuals from the left and right cutting edges, the top/center of the blade and a rearview that includes the ripper.
    • Operators can easily switch between machines, or change jobsites with no downtime.
    • Enables trainers to stand beside an operator, without noise or movement.

Get started with Cat Command

    • Cat Command is designed exclusively for – and deeply integrated into – select Cat machines, resulting in system reliability and durability.
    • Select Cat Command models include easy-to-install Command kits.
    • Cat Command can be retro-installed on certain existing Cat machines.
    * Talk to your Cat dealer for more information about Cat Command.

View 360