Overview
Cat Command for Loading is a remote control option that contributes to jobsite safety by allowing operators to run a wheel loader remotely in hazardous applications.
Benefits & Features
Work at a Safe Distance
- Reduces operator safety risks such as high wall collapse, machine rollover or fall.
- Decreases potential for injury from slips, trips and falls when climbing on and off machine.
- Includes multiple, redundant safety features to stop all motion of machine if a stop switch is pressed, wireless communications are lost, a severe fault is detected or the command console is tilted more than 60 degrees from normal operating position.
- Prevents accidental activation with command console that is unique to each machine system.
- Prevents coasting in neutral thanks to auto hold feature.
Enhance Productivity
- Operators can quickly and easily switch between Cat Command installed machines, and change jobsite locations, with no downtime.
- Reduce operator fatigue by eliminating the in-cab effects of vibration, noise, and rough terrain.
- Quick system response and fine modulation of controls are enabled through comprehensive machine integration of the electronic and hydraulic systems.
- Commands from the command console are sent directly to the engine and implement electronics via a dedicated radio, reducing delays.
- The system allows complete control with access to advanced features offered on Cat machines such as Autodig, an optional feature that increases productivity.
- Allow operators who have had medical concerns to return to work and operate machines earlier.
CAT COMMAND CONSOLE
- Available for select Cat dozers, excavators, and wheel loaders.
- Fully functional command console contains basic machine functions such as start-up/shutdown, gear selection, rack/dump and lift/lower are easily accessed through the ergonomic layout of console controls.
- Critical machine and system status information is also delivered through the command console.
- LED indicator lights and display show the user the gear selection, temperatures, operational mode, faults, systems status, and low battery warning.
- Integration of Caterpillar electronics enables the activation of several safety features to ensure the user is in control of the machine at all times.
- Command console allows for line-of-sight control up to 400 meters (437 yards).
- Does not require any on-site communications infrastructure.
- Uses 2.4 GHz frequency communications protocol.
- The machine will shut down if the controller is tipped more than 45 degrees, indicating that the operator has fallen.
NOTE: Command Console is unavailable in Europe, Australia, or New Zealand.
December 2, 2024
Specifications
Units:
Benefits & Features
Work at a Safe Distance
- Reduces operator safety risks such as high wall collapse, machine rollover or fall.
- Decreases potential for injury from slips, trips and falls when climbing on and off machine.
- Includes multiple, redundant safety features to stop all motion of machine if a stop switch is pressed, wireless communications are lost, a severe fault is detected or the command console is tilted more than 60 degrees from normal operating position.
- Prevents accidental activation with command console that is unique to each machine system.
- Prevents coasting in neutral thanks to auto hold feature.
Enhance Productivity
- Operators can quickly and easily switch between Cat Command installed machines, and change jobsite locations, with no downtime.
- Reduce operator fatigue by eliminating the in-cab effects of vibration, noise, and rough terrain.
- Quick system response and fine modulation of controls are enabled through comprehensive machine integration of the electronic and hydraulic systems.
- Commands from the command console are sent directly to the engine and implement electronics via a dedicated radio, reducing delays.
- The system allows complete control with access to advanced features offered on Cat machines such as Autodig, an optional feature that increases productivity.
- Allow operators who have had medical concerns to return to work and operate machines earlier.
CAT COMMAND CONSOLE
- Available for select Cat dozers, excavators, and wheel loaders.
- Fully functional command console contains basic machine functions such as start-up/shutdown, gear selection, rack/dump and lift/lower are easily accessed through the ergonomic layout of console controls.
- Critical machine and system status information is also delivered through the command console.
- LED indicator lights and display show the user the gear selection, temperatures, operational mode, faults, systems status, and low battery warning.
- Integration of Caterpillar electronics enables the activation of several safety features to ensure the user is in control of the machine at all times.
- Command console allows for line-of-sight control up to 400 meters (437 yards).
- Does not require any on-site communications infrastructure.
- Uses 2.4 GHz frequency communications protocol.
- The machine will shut down if the controller is tipped more than 45 degrees, indicating that the operator has fallen.
NOTE: Command Console is unavailable in Europe, Australia, or New Zealand.
CAT COMMAND STATION
- Available for select Cat dozers, excavators and wheel loaders.
- Enables the operator to work remotely in a comfortable, seated “virtual cab” with familiar controls and machine displays.
- Can be located in a command center onsite or many miles away.
- Reduces operator fatigue with a comfortable indoor working environment.
- Operator inputs are sent directly to the machine electronics via a dedicated radio transmitter/receiver, resulting in real-time implement control.
- Controls deliver the same response time as in the cab, maintaining precise control for all excavator applications.
- High-quality video delivers a clear view of the work area.
- Operators can easily switch between machines, or change jobsites with no downtime.
- Enables trainers to stand beside an operator, without noise or movement.
Get started with Cat Command
- Cat Command is designed exclusively for – and deeply integrated into – select Cat machines, resulting in system reliability and durability.
- Select Cat Command models include easy-to-install Command kits.
- Cat Command can be retro-installed on certain existing Cat machines.
Data not available.
Related Products
Units:
Small Wheel Loaders
Cat® small wheel loaders deliver superior performance, fast cycle times and versatility to help you move more material. The optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. Dedicated configurations for applications such as waste handling, aggregate handling and more, make the Cat small wheel loader ideal for specific jobsite demands. Enjoy all day comfort in the spacious cab which features ergonomic controls and a rear view camera.
| Model | Maximum Gross Power | ||
|---|---|---|---|
| 938M | — | — | 2.5-5.0 m3 (3.2-6.5 yd3) |
| 930M | — | — | 2.1-5.0 m3 (2.7-6.5 yd3) |
| 926M | — | — | 1.9-5.0 m3 (2.5-6.5 yd3) |
| 930M Aggregate Handler | — | — | 2.5-5.0 m3 (3.3-6.5 yd3) |
| 938M Aggregate Handler | — | — | 2.9-5.0 m3 (3.8-6.5 yd3) |
| 926M Aggregate Handler | — | — | 2.5-5.0 m3 (3.3-6.5 yd3) |
| 930M Waste Handler | — | — | 3.0-5.0 m3 (3.9-6.5 yd3) |
| 938M Waste Handler | — | — | 3.0-5.0 m3 (3.9-6.5 yd3) |
| 930M Ag Handler | — | — | 2.1-5.0 m³ (2.7-6.5 yd³) |