The new D6T dozer makes high efficiency dozing easy. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.
Engine Model | Cat C9.3 ACERT™ |
Flywheel Power | — |
Operating Weight | — |
Engine Model | Cat C9.3 ACERT™ |
Flywheel Power | — |
Displacement | — |
Net Power - 2,200 rpm - ISO 9249/SAE J1349 | — |
Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm | — |
Build Number | 19 |
Net Power - 2,200 rpm - ISO 9249/SAE J1349 (DIN) | — |
Emissions | U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final |
Net Power - Maximum - ISO 9249/SAE J1349 (DIN) at 1,200 rpm | — |
Note (1) | All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. |
Note (3) | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Note (2) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
Fuel Tank | — |
DEF Tank | — |
Operating Weight | — |
XL Narrow | — |
XW VPAT | — |
XL VPAT | — |
XW VPAT - With Foldable Blade | — |
XW SU | — |
XL SU | — |
LGP S | — |
XL Fine Grading | — |
LGP VPAT | — |
Note | Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator. |
LGP VPAT - With Foldable Blade | — |
6 VPAT - XW Foldable | — |
6 VPAT - XL | — |
6 VPAT - LGP | — |
6 SU - XL Narrow* | — |
6 VPAT - XW | — |
6 S - LGP | — |
6 SU - XL | — |
6 SU - XW | — |
6 VPAT - LGP Foldable | — |
Note | *Not available in all areas. |
Ground Pressure (ISO 16754)(3) | — |
Ground Clearance | — |
Machine Height - To Product Link Antenna(1) | — |
Length - Basic Tractor(2) | — |
Length - Track on Ground | — |
Note (2) | (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. |
Width - Tractor - Without Trunnions - Standard Track | — |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Length - Track on Ground | — |
Ground Clearance | — |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. |
Ground Pressure (ISO 16754)(3) | — |
Width - Tractor - Without Trunnions - Standard Track | — |
Length - Basic Tractor(2) | — |
Machine Height - To Product Link Antenna(1) | — |
Note (2) | (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. |
Note (2) | (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Ground Clearance | — |
Machine Height - To Product Link Antenna(1) | — |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. |
Ground Pressure (ISO 16754)(3) | — |
Length - Basic Tractor(2) | — |
Width - Tractor - Without Trunnions - Standard Track | — |
Length - Track on Ground | — |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Machine Height - To Product Link Antenna(1) | — |
Length - Track on Ground | — |
Note (2) | (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. |
Length - Basic Tractor(2) | — |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. |
Ground Clearance | — |
Ground Pressure (ISO 16754)(3) | — |
Width - Tractor - Without Trunnions - Standard Track | — |
Machine Height - To Product Link Antenna(1) | — |
Length - Basic Tractor(2) | — |
Length - Track on Ground | — |
Note (2) | (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. |
Ground Clearance | — |
Width - Tractor - Without Trunnions - Standard Track | — |
Ground Pressure (ISO 16754)(3) | — |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Length - Basic Tractor(2) | — |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. |
Length - Track on Ground | — |
Ground Clearance | — |
Ground Pressure (ISO 16754)(3) | — |
Width - Tractor - Without Trunnions - Standard Track | — |
Machine Height - To Product Link Antenna(1) | — |
Note (2) | (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. |
6 VPAT - XW | — |
6 VPAT - XL | — |
6 SU - XL Narrow* | — |
6 SU - XL | — |
6 S - LGP | — |
6 VPAT - LGP | — |
6 VPAT - XW Foldable | — |
6 SU - XW | — |
6 VPAT - LGP Foldable | — |
Note | *Not available in all areas. |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. |
Length - Track on Ground | — |
Length - Basic Tractor(2) | — |
Ground Clearance | — |
Ground Pressure (ISO 16754)(3) | — |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Machine Height - To Product Link Antenna(1) | — |
Width - Tractor - Without Trunnions - Standard Track | — |
Note (2) | (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. |
Width - Tractor - Without Trunnions - Standard Track | — |
Ground Pressure (ISO 16754)(3) | — |
Length - Basic Tractor(2) | — |
Ground Clearance | — |
Length - Track on Ground | — |
Machine Height - To Product Link Antenna(1) | — |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Note (2) | (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. |
Ground Clearance | — |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Width - Tractor - Without Trunnions - Standard Track | — |
Length - Basic Tractor(2) | — |
Length - Track on Ground | — |
Machine Height - To Product Link Antenna(1) | — |
Ground Pressure (ISO 16754)(3) | — |
Machine Height - To Product Link Antenna(1) | — |
Length - Track on Ground | — |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Length - Basic Tractor(2) | — |
Ground Clearance | — |
Ground Pressure (ISO 16754)(3) | — |
Note (2) | (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. |
Width - Tractor - Without Trunnions - Standard Track | — |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. |
Note (2) | (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. |
Data not available.