The Cat 395 gets every job done every time. A 10% higher digging force eases bucket penetration to reduce digging cycle time in the most demanding applications. With up to a 15% higher payload and the ability to carry the SD6.5m3 bucket, this mass excavator can load a 70-ton off-road truck in 5-6 passes. For deep trenching work, the 395 digs down deep with maximum digging depths from 7190mm (23’7” ft) up to 11 710 (38’5” ft). The 395 is built for extreme durability with 2x reinforced booms, sticks, upper and lower frames. Reduced hydraulic oil capacity, improved filters with longer service intervals, and an integrated auto-lube-ready system save you up to 20% in maintenance costs. Equipped with the latest technology and data, the 395 helps you make informed and smart decisions to improve efficiency, increase productivity, and enhance safety.
Net Power - ISO 9249 | — |
Operating Weight | — |
Maximum Digging Depth | — |
Net Power - ISO 9249 | — |
Net Power - ISO 9249 (DIN) | — |
Engine Model | Cat C18 |
Engine Power - ISO 14396:2002 | — |
Engine Power - ISO 14396 (DIN) | — |
Bore | — |
Stroke | — |
Displacement | — |
Biodiesel Capability | B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of manufacture. |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. |
Main System - Maximum Flow - Implement | — |
Maximum Pressure - Equipment | — |
Maximum Pressure - Travel | — |
Maximum Pressure - Swing | — |
Swing Speed | — |
Maximum Swing Torque | — |
Operating Weight | — |
Note (1) | Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. |
Fuel Tank Capacity | — |
Cooling System | — |
Engine Oil | — |
Swing Drive | — |
Final Drive - Each | — |
Hydraulic System - Including Tank | — |
Hydraulic Tank | — |
DEF Tank | — |
Boom | GP 8.4m (25'7") |
Stick | R4.4m (14'5") |
Bucket | SD 5.2m³ (6.8 yd³) |
Shipping Height - Top of Cab | — |
Handrail Height | — |
Shipping Length | — |
Tail Swing Radius | — |
Counterweight Clearance | — |
Ground Clearance | — |
Track Length | — |
Track Length to Center of Rollers | — |
Track Gauge | — |
Transport Width | — |
Note | Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps |
Maximum Digging Depth | — |
Boom | GP 8.4m (25'7") |
Stick | R4.4m (14'5") |
Bucket | SD 5.2m³ (6.8 yd³) |
Maximum Reach at Ground Level | — |
Maximum Cutting Height | — |
Maximum Loading Height | — |
Minimum Loading Height | — |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | — |
Maximum Vertical Wall Digging Depth | — |
Bucket Digging Force - ISO | — |
Stick Digging Force - ISO | — |
Recyclability | 98% |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Data not available.