7395

7395 - 2012

Overview

7395 Electric Rope Shovel

Specifications

Units: 
Dipper Payload
Dipper Capacity 20.6-55.8 m3 (27-73 yd3)
Working Weight - With Dipper and Standard Links
See more
  August 4, 2024

Specifications

Units: 
Dimensions
Dipper Payload
Dipper Capacity 20.6-55.8 m3 (27-73 yd3)
Note Dependent on application and material density.
Weights
Working Weight - With Dipper and Standard Links
Ballast - Furnished By Customer
Note (1) These weights will vary slightly depending upon dipper and optional equipment selection.
Note (2) All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
Main Structures
Ground Bearing Pressure - 274.3 cm (108 in) Treads
Planetary Propel Dual-motor independent drive.
Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard
Ground Bearing Pressure - Total Effective Bearing Area (2)
Ground Bearing Pressure Ground bearing pressure is dependent upon many factors.
Ground Bearing Pressure - Total Effective Bearing Area (1)
Upper Works Overall Width - Including Standard Walkways
Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads
Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard
Swing Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Hoist A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Optimal Working Ranges*
Cutting Height - Maximum
Dumping Height - With Clearance to Open Dipper Door
Cutting Radius - Maximum
Radius of Level Floor
Revolving Frame Tail Swing Radius
Note (1) Optimal working ranges based on loading a Cat® 793F truck.
Note (2) *All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
Lube System
Type Automatic, single-line system for open gear lubricant and grease.
Components (1) 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
Components (2) External fast fill from lower level.
Electrical
Drive IGBT Acutrol drive system.
Power Requirements - Peak power
Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V
Power Requirements - Average Power Demand 777-1087 kW (1,042-1,458 hp)
Power Requirements - 60 Hz 7,200V
Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V, 11,000V
Note Other voltages available to suit customer requirements.
Front End
Rope Data - Crowd - Diameter
Rope Data - Dipper Trip - Diameter
Rope Data - Hoist - Diameter
Rope Data - Boom Suspension - Diameter
Rope Data - Crowd - No. 1
Rope Data - Retract - No. 1
Rope Data - Dipper Trip - No. 1
Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Rope Data - Boom Suspension - No. 4
Crowd Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Rope Data - Hoist - No. 2
Rope Data - Retract - Diameter
Note High impact ropes available as an option

Benefits & Features

Data not available.

View 360