Cat® Electric Rope Shovels combine immense payload capability with low maintenance requirements and high reliability to deliver the lowest cost-per-ton loading solution for long-life mines. Our smallest rope shovel, the Cat 7295 has a payload of 45 tonnes (50 tons) — about half the payload of our flagship 7495. But like its larger counterpart, the 7295 features AC IGBT electrics for greater uptime, lower operating costs and faster cycle times. The 7295 is cleaner and more efficient than diesel-powered machines, plus its regenerative braking technology feeds electrical energy back to the grid.
Dipper Payload | — |
Dipper Capacity | 19.1-38.2 m3 (25-50 yd3) |
Working Weight - With Dipper and Standard Links | — |
Dipper Payload | — |
Dipper Capacity | 19.1-38.2 m3 (25-50 yd3) |
Note | Dependent on application and material density. |
Working Weight - With Dipper and Standard Links | — |
Ballast - Furnished By Customer | — |
Note (1) | These weights will vary slightly depending upon dipper and optional equipment selection. |
Note (2) | All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. |
Ground Bearing Pressure | Ground bearing pressure is dependent upon many factors. |
Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard | — |
Ground Bearing Pressure - 182.9 cm (72 in) Treads | — |
Upper Works Overall Width - Including Standard Walkways | — |
Planetary Propel | Dual-motor independent drive. |
Swing | Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame. |
Ground Bearing Pressure - Total Effective Bearing Area | — |
Hoist | A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum. |
Dumping Height - With Clearance to Open Dipper Door | — |
Cutting Radius - Maximum | — |
Revolving Frame Tail Swing Radius | — |
Radius of Level Floor | — |
Cutting Height - Maximum | — |
Note (1) | Optimal working ranges based on loading a Cat® 785D truck. |
Note (2) | *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. |
Type | Automatic, single-line system for open gear lubricant and grease. |
Components (1) | 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. |
Components (2) | External fast fill from lower level. |
Power Requirements - 60 Hz | 4,160V, 7,200V |
Power Requirements - Peak power | — |
Drive | IGBT Acutrol drive system. |
Power Requirements - Voltage | 3 phase, 50/60 Hz, 7,200V |
Power Requirements - 50 Hz | 6,000V, 6,600V, 7,200V |
Power Requirements - Average Power Demand | 538-753 kW (721-1,010 hp) |
Note | Other voltages available to suit customer requirements. |
Standard Rope Data - Retract - Diameter | — |
Standard Rope Data - Dipper Trip - Diameter | — |
Standard Rope Data - Boom Suspension - No. | 4 |
Standard Rope Data - Crowd - No. | 1 |
Standard Rope Data - Boom Suspension - Diameter | — |
Components | One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. |
Standard Rope Data - Retract - No. | 1 |
Standard Rope Data - Hoist - Diameter | — |
Standard Rope Data - Crowd - Diameter | — |
Standard Rope Data - Dipper Trip - No. | 1 |
Crowd | Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. |
Standard Rope Data - Hoist - No. | 2 |
Note | High impact ropes available as an option |
Data not available.