637KNon-Current
637K Open - 2016, Tier 4 Final, Stage IV
Overview
Cat’s 637K Wheel Tractor-Scraper is engineered to conquer challenges operators face worldwide. With its strength and durability, it works in some of the most difficult conditions and materials one can find.
Specifications
Units:
| Flywheel Power - Tractor/Scraper | — |
| Scraper Capacity - Heaped | — |
| Top Speed - Loaded | — |
Benefits & Features
EFFICIENCY THROUGH TECHNOLOGY
- Load Assist (optional) is designed to help shorten the learning curve of inexperienced operators to ensure consistency and faster loading of material while reducing effort of the operator. Based on the speed of the machine, Load Assist automatically adjusts the cutting edge height to manage wheel slip and to ensure consistent and efficient loading in bulk earthmoving applications.
- Ground Speed Control sets the desired top speed by the operator if job site conditions or segment speed limits require a speed less than full run out. Machine Speed Limit is intended for use when top speed needs to be limited for longer durations and Ground Speed Control is intended for use when the top speed needs to be reduced for shorter segments or intermediate periods of time. The operator can set the desired top speed and the machine will find the correct gear that works best for the engine and transmission.
- Fuel Economy Mode is a two part feature when selected. The first part of the feature lowers the transmission shift points allowing shifting to take place at lower rpms to aid in fuel savings. The second part of the Fuel Economy Mode allows the machine when operated at engine rpms less than full throttle to automatically vary the power distribution between the tractor and the scraper.
- The Payload Estimator (optional) will calculate the payload of the machine in tonnes or tons by measuring the bowl lift cylinder pressures at the beginning of the loaded haul segment. This feature works best when using Sequence Assist. Using Payload Estimator during testing has achieved better than 95% accuracy when compared to actual scale weights. The Payload Estimator feature comes automatically when a machine is ordered with Sequence Assist.
- Cat Grade Control (optional) intelligently ensures the machine does not cut below grade in the cut area or over fill in the fill area, avoiding rework and moving unnecessary material.
- Sequence Assist (optional) uses cylinder position sensors to automate bowl, apron and further implement controls throughout the four core work cycles: Dig, Haul, Unload and Return. When utilized this can reduce up to 14 individual operator commands per cycle. Sequence Assist simplifies control over the implements, reduces joystick usage, automatically controls cushion hitch, transmission hold and ejector.
- Machine Speed Limit is designed to take the place of top gear selection. If the machine top speed needs to be limited the operator can select the top speed through the display or the top speed can be set in ET. This will allow the machine to find the correct gear that works best for the engine and transmission. Allowing the engine and transmission to select the correct gear to pull the load in most cases resulting in a lower engine load factor and lower fuel burn verses using top gear selection that required the machine to run at engine speeds at or close to high idle.
OPERATOR COMFORT AND CONTROL
- K Series steering system design requires significantly less steering effort. The reduced steering effort will allow for decreased operator fatigue and a more efficient operator resulting in possible higher rates of production late in the work cycle.
- The K Series cab interior improves operator comfort and visibility. The overall interior is 21% larger than the G Series cab.
- Advanced Cushion Hitch allows the cushion hitch to prevent end stroke by having the ability to predict end stroke events and manage the rate of dampening. Resulting in reduced hitch maintenance and improved operator ride in rough conditions.
BUILT-IN SAFETY FEATURES
- Tire Spin Reduction feature will allow the machine to control the slip of the tractor tires only.
- In the event of an engine over speed situation, the compression brake or brakes will automatically engage with no operator input. The machine determines the over speed condition based on rate of acceleration and applies compression brakes automatically.
- Differential Lock Engagement Protection allows the machine to prevent the operator from engaging the differential lock when damage could occur.
Specifications
Units:
| Rated Load | 37 200 kg (82,200 lb); 37.2 tonnes (41.1 tons) |
| Fuel Tank Refill Capacity - Scraper | — |
| 180° Curb-to-Curb Turning Width | — |
| Overall Shipping Height | — |
| Overall Width | — |
| Top Speed - Loaded | — |
| Scraper Capacity - Heaped | — |
| Width - Cut | — |
| Maximum Depth of Cut | — |
| Tires - Scraper | 37.25R35**E3 |
| Maximum Depth of Spread | — |
| Scraper Capacity - Struck | — |
| Tires - Tractor | 37.25R35**E3 |
| Rated Engine RPM - Tractor | — |
| Rated Engine RPM - Scraper | — |
| Flywheel Power - Scraper | — |
| Engine Model - Scraper | Cat C9.3 |
| Emissions | Cat C9.3 and C18 engines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards. |
| Flywheel Power - Tractor | — |
| Engine Model - Tractor | Cat C18 |
| Flywheel Power - Tractor/Scraper | — |
| Scraper Capacity - Heaped | — |
| Top Speed - Loaded | — |
| Crankcase - Tractor | — |
| Crankcase - Scraper | — |
| Transmission System - Tractor | — |
| Hydraulic System | — |
| Diesel Exhaust Fluid - Scraper | — |
| Diesel Exhaust Fluid - Tractor | — |
| Fuel Tank | — |
| Transmission System - Scraper | — |
| Cooling System - Scraper | — |
| Cooling System - Tractor | — |
| Front of Tractor to Front Axle | — |
| Axle to Vertical Hitch Pin | — |
| Wheel Base | — |
| Rear Axle - Rear of Machine | — |
| Width - Inside of Bowl | — |
| Height - Scraper Blade Maximum | — |
| Length - Overall Machine - Standard | — |
| Height - Overall Shipping | — |
| Width - Outside Rear Tires | — |
| Length - Maximum (Push-Pull) | — |
| Extended Push Block (Push-Pull) | — |
| Width - Rear Tire Centers | — |
| Width - Overall Machine | — |
| Width - Tractor | — |
| Height - Top of Cab | — |
| Ground Clearance - Tractor | — |
| Overall Length | — |
| Operating Weight - Empty | — |
| Overall Length - With Bail Down | — |
| Operating Weight - Empty | — |
| ROPS/FOPS | ROPS/FOPS meet “ISO Standards.” |
| Exterior Sound Level | The exterior sound power level for the standard machine (ISO 6393) is 116 dB(A). |
| Seat Belt | SAE J386:FEB2006 |
| Reverse Alarm | ISO 9533:2010 |
| Rollover Protection Structure (ROPS) | ISO 3471:2008 for up to 21 282 kg (46,919 lb) |
| Brakes | ISO 3450:2011 |
| Falling Object Protective Structure (FOPS) | ISO 3449:2005 Level II |
| Steering System | ISO 5010:2007 |
| Transmission Gear - Third | — |
| Transmission Gear - Reverse | — |
| Transmission Gear - First | — |
| Transmission Gear - Seventh | — |
| Transmission Gear - Fifth | — |
| Transmission Gear - Eighth | — |
| Transmission Gear - Fourth | — |
| Transmission Gear - Second | — |
| Transmission Gear - Sixth | — |
| Bail Lower | — |
| Ejector Extend | — |
| Apron Lower | — |
| Bowl Raise | — |
| Bowl Lower | — |
| Apron Raise | — |
| Bail Raise | — |
| Ejector Retract | — |
Benefits & Features
EFFICIENCY THROUGH TECHNOLOGY
- Load Assist (optional) is designed to help shorten the learning curve of inexperienced operators to ensure consistency and faster loading of material while reducing effort of the operator. Based on the speed of the machine, Load Assist automatically adjusts the cutting edge height to manage wheel slip and to ensure consistent and efficient loading in bulk earthmoving applications.
- Ground Speed Control sets the desired top speed by the operator if job site conditions or segment speed limits require a speed less than full run out. Machine Speed Limit is intended for use when top speed needs to be limited for longer durations and Ground Speed Control is intended for use when the top speed needs to be reduced for shorter segments or intermediate periods of time. The operator can set the desired top speed and the machine will find the correct gear that works best for the engine and transmission.
- Fuel Economy Mode is a two part feature when selected. The first part of the feature lowers the transmission shift points allowing shifting to take place at lower rpms to aid in fuel savings. The second part of the Fuel Economy Mode allows the machine when operated at engine rpms less than full throttle to automatically vary the power distribution between the tractor and the scraper.
- The Payload Estimator (optional) will calculate the payload of the machine in tonnes or tons by measuring the bowl lift cylinder pressures at the beginning of the loaded haul segment. This feature works best when using Sequence Assist. Using Payload Estimator during testing has achieved better than 95% accuracy when compared to actual scale weights. The Payload Estimator feature comes automatically when a machine is ordered with Sequence Assist.
- Cat Grade Control (optional) intelligently ensures the machine does not cut below grade in the cut area or over fill in the fill area, avoiding rework and moving unnecessary material.
- Sequence Assist (optional) uses cylinder position sensors to automate bowl, apron and further implement controls throughout the four core work cycles: Dig, Haul, Unload and Return. When utilized this can reduce up to 14 individual operator commands per cycle. Sequence Assist simplifies control over the implements, reduces joystick usage, automatically controls cushion hitch, transmission hold and ejector.
- Machine Speed Limit is designed to take the place of top gear selection. If the machine top speed needs to be limited the operator can select the top speed through the display or the top speed can be set in ET. This will allow the machine to find the correct gear that works best for the engine and transmission. Allowing the engine and transmission to select the correct gear to pull the load in most cases resulting in a lower engine load factor and lower fuel burn verses using top gear selection that required the machine to run at engine speeds at or close to high idle.
OPERATOR COMFORT AND CONTROL
- K Series steering system design requires significantly less steering effort. The reduced steering effort will allow for decreased operator fatigue and a more efficient operator resulting in possible higher rates of production late in the work cycle.
- The K Series cab interior improves operator comfort and visibility. The overall interior is 21% larger than the G Series cab.
- Advanced Cushion Hitch allows the cushion hitch to prevent end stroke by having the ability to predict end stroke events and manage the rate of dampening. Resulting in reduced hitch maintenance and improved operator ride in rough conditions.
BUILT-IN SAFETY FEATURES
- Tire Spin Reduction feature will allow the machine to control the slip of the tractor tires only.
- In the event of an engine over speed situation, the compression brake or brakes will automatically engage with no operator input. The machine determines the over speed condition based on rate of acceleration and applies compression brakes automatically.
- Differential Lock Engagement Protection allows the machine to prevent the operator from engaging the differential lock when damage could occur.
SAVE ON MAINTENANCE TIME
- The fuel, water and engine oil are relocated at ground level on the right hand side of the machine for easy access.
Data not available.
Standard Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- POWER TRAIN – TRACTOR
- Cat C18 engine with MEUI™
- Compression engine brake
- Electric start, 24V
- Air cleaner, dry type with precleaner
- Fan, hydraulic
- Ground level engine shutdown
- Radiator, aluminum unit core, 9 fins per inch
- Guard, crankcase
- Starting aid, ether
- Braking system:<ul><li>Primary and secondary, wet disc, hydraulic actuated</li><li>Parking, hydraulic-released, spring-applied</li></ul>
- Throttle lock
- Transmission:<ul><li>8-speed planetary power shift</li><li>ECPC control</li><li>APECS software</li><li>Programmable top gear selection</li><li>Transmission hold</li><li>Differential lock</li><li>Guard, power train</li><li>Standard tire spin reduction</li><li>Ground speed control</li><li>Machine speed limit</li><li>Differential lock protection</li></ul>
- POWER TRAIN – SCRAPER
- Cat C9.3 engine:<ul><li>High pressure common rail fuel</li><li>Constant lift engine brake</li></ul>
- Electric start, 24V
- Air cleaner, dry type with precleaner
- Fan, mechanical driven
- Ground level engine shutdown
- Radiator, aluminum unit core, 9 fins per inch
- Starting aid, either
- Braking system:<ul><li>Primary and secondary, dry caliper, hydraulic actuated</li></ul>
- Transmission:<ul><li>4-speed (torque converter drive)</li><li>Planetary power shift</li></ul>
- ELECTRICAL – TRACTOR
- Alternator, 150 Amp
- Batteries (4), 12V, 1,000 CCA, maintenance free, high output
- Electrical system, 24V
- Lighting system:<ul><li>Headlights, LED</li><li>Turn signals with hazard function, LED floodlights, (2) cutting edge (1) bowl, halogen side vision (2)</li></ul>
- Starting/charging receptacle
- ELECTRICAL – SCRAPER
- Alarm, backup
- Batteries (4) 12V, 1,000 CCA, maintenance free, high output
- Alternator, 65 Amp
- Electrical system, 24V
- Lighting system:<ul><li>Brake lights, LED</li><li>Turn signals with hazard function, LED</li></ul>
- OPERATOR ENVIRONMENT – TRACTOR
- HVAC system, heat, AC, defrost
- Thermostat control of HVAC system
- Coat hook
- Lunchbox platform with holding strap
- Diagnostic connection (2)
- 12V power ports (2)
- Differential lock (1)
- Dome courtesy light
- Horn, electric
- T-Handle implement control
- Mirror, rearview
- Radio ready
- ROPS/FOPS cab, pressurized
- Keypad switches:<ul><li>Throttle lock</li><li>Wipers/washers</li><li>Hazard lights</li><li>Retarding level select</li><li>Work lights on, off</li><li>Information mode on Messenger Display</li></ul>
- Safety tab rocker switches
- Seat belt, static two-piece
- Seat, Cat Advanced Ride Management (ARM), Cat Comfort Series 3, rotates 30 degrees
- Steering wheel, tilt, telescoping, padded
- Windows, right side emergency egress
- Windows, sliding
- Windows, laminated, zipped in
- Windshield wipers, front and rear windows, includes washers
- Door lock
- Messenger Display
- Gauges, warnings include:<ul><li>Coolant temperature</li><li>Engine oil temperature</li><li>Hydraulic oil temperature</li><li>Diesel Particulate Filter (DPF) temperature</li><li>Fuel level</li><li>Park brake</li><li>Implement lockout</li><li>Brake system</li><li>Regeneration required</li><li>Throttle lock</li><li>System voltage</li><li>Secondary steering</li><li>Bail down</li><li>Ejector auto</li><li>Differential lock</li><li>Apron float</li><li>Transmission hold</li><li>Cushion hitch</li><li>High beam lights</li><li>Action lamp</li><li>Engine speed, rpm</li><li>Gear selection</li><li>DEF fill levels</li></ul>
- FLUIDS
- Extended Life Coolant to –37° C (–34° F)
- OTHER STANDARD EQUIPMENT – TRACTOR
- Advanced cushion hitch
- Accumulators (cushion hitch) with Canadian Registration Number (CRN)
- Fast oil change
- Fenders, non-metallic
- Heater, engine coolant 120V
- Rims (2)
- Tow hooks, front
- Vandalism locks
- Heater, engine coolant 120V
- Steering locks
- OTHER STANDARD EQUIPMENT – SCRAPER
- Bowl:<ul><li>18.3 m3 (24 yd3), struck</li><li>26 m3 (34 yd3), heaped</li></ul>
- Vandalism locks
- Scraper fenders
- Overflow guard
- Fast oil change
- Rims (2)
- Hydraulic position sensing cylinders (bowl lift and apron)
Optional Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- STEERING ARRANGEMENTS
- Secondary Steering Arrangement
- INTEGRATED TECHNOLOGIES
- Sequence Assist Arrangement with Payload Estimator
- Load Assist
- Cat Grade Control with Load Assist
- Advanced Tire Spin Reduction
- OTHER ATTACHMENTS
- Camera arrangement – Work Area Vision System (WAVS)
- Cab beacon
- Air horn
- Air horn and beacon
- Wiring group
- Push Pull
- SERVICE INSTRUCTIONS
- Film arrangement – U.S. (ANSI)
- Film arrangement – International (ISO)
Related Products
Units:
Detect
On the surface, operators in the cabs of large mining equipment often cannot see if another machine or vehicle is too close for safe operation. Detect helps alleviate this potential safety hazard and can also be configured to provide valuable information about site conditions and other assets working in the area. Underground, continuous equipment movement on a longwall face can pose risks to those in the working area.
Equipment Management
Cat® Equipment Management gives you access to the data you need to keep your equipment on the job site and earning money. You can track equipment location and hours, monitor machine use and health, then take informed action that will keep your operation running smoothly, efficiently and profitably.