From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.
Engine Model | Cat C7.1 ACERT™ |
Flywheel Power | — |
Operating Weight | — |
Engine Model | Cat C7.1 ACERT™ |
Flywheel Power | — |
Bore | — |
Stroke | — |
Displacement | — |
Net Power - 1,800 rpm - ISO 9249/SAE J1349 (DIN) | — |
Net Power - Maximum - ISO 14396 at 2,200 rpm | — |
Net Power - 1,800 rpm - ISO 9249/SAE J1349 | — |
Net Power - Maximum - SAE J1995 at 2,200 rpm | — |
Note (1) | All non road Tier 4, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (EPA), 10 ppm (EU) (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. |
Emissions | Tier 4 Final/Stage IV/Korea Tier 4 Final |
Note (2) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
Net Power - Maximum - ISO 14396 (DIN) at 2,200 rpm | — |
Note (3) | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. |
Operating Weight | — |
Operating Weight - LGP Waste Handler | — |
Operating Weight - XL Waste Handler | — |
Shipping Weight - LGP Waste Handler | — |
Shipping Weight - XL Waste Handler | — |
Height - Grouser | — |
Track Gauge | — |
Length - Basic Tractor - With Drawbar* | — |
Ground Clearance | — |
Length - Track on Ground | — |
Width - Tractor - Without Trunnions | — |
Machine Height - Grouser Tip - Exhaust Stack | — |
Note | *Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line). |
Width - Tractor - Without Trunnions | — |
Machine Height - Grouser Tip - Exhaust Stack | — |
Ground Pressure | — |
Track Gauge | — |
Ground Clearance | — |
Height - Grouser | — |
Length - Basic Tractor - With Drawbar* | — |
Length - Track on Ground | — |
Note | *Add 1185 mm (46.7 in) to length of basic tractor (with drawbar) with SU blade added. Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line). |
Ground Pressure | — |
XL SU | — |
LGP VPAT | — |
LGP VPAT - Landfill* | — |
Note | *Blade capacity with trash rack. |
XL VPAT Landfill* | — |
XL VPAT | — |
LGP VPAT - Landfill* | — |
XL SU | — |
XL VPAT Landfill* | — |
XL VPAT | — |
LGP VPAT | — |
Note | *Blade capacity with trash rack. |
0.5 Reverse | — |
1.5 Forward | — |
2.5 Forward | — |
0.7 Forward | — |
1.7 Reverse | — |
1.7 Forward | — |
1.5 Reverse | — |
0.5 Forward | — |
2.5 Reverse | — |
2.7 Forward | — |
0.7 Reverse | — |
2.7 Reverse | — |
1.0 Forward | — |
2.0 Forward | — |
3.0 Forward | — |
1.0 Reverse | — |
2.0 Reverse | — |
3.0 Reverse | — |
Data not available.