From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.
Engine Model | Cat C15 ACERT™ |
Flywheel Power | — |
Operating Weight | — |
Engine Model | Cat C15 ACERT™ |
Flywheel Power | — |
Bore | — |
Stroke | — |
Displacement | — |
Net Power - 1,900 rpm - ISO 9249/SAE J1349 (DIN) | — |
Net Power - Maximum - ISO 9249/SAE J1349 DIN at 1,700 rpm | — |
Net Power - 1,900 rpm - ISO 9249/SAE J1349 | — |
Net Power - Maximum - ISO 9249/SAE J1349 at 1,700 rpm | — |
Note (3) | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes. |
Emissions | Tier 4 Final/Stage IV/Korea Tier 4 |
Note (2) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
Note (1) | All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. |
Operating Weight | — |
Standard Waste Handler | — |
LGP Waste Handler | — |
LGP Waste Handler | — |
Standard Waste Handler | — |
Machine Height - Grouser Tip - Exhaust Stack | — |
Machine Height - Grouser Tip - Length of Track on Ground | — |
Height - Top of Roof-Mounted Precleaner | — |
Width - Tractor - Over Trunnions | — |
Machine Height - Grouser Tip - EROPS (Top of Railing) | — |
Track Gauge | — |
Height - Grouser | — |
Machine Height - Grouser Tip - Ground Clearance | — |
Length - Basic Tractor - With Striker Bars with Two Counterweights* | — |
Without Trunnions - Standard Shoe Width | — |
Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser* | — |
Note | *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in. |
Without Trunnions - Standard Shoe Width | — |
Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser* | — |
Width - Tractor - Over Trunnions | — |
Length - Basic Tractor - With Striker Bars with Two Counterweights* | — |
Height - Top of Roof-Mounted Precleaner | — |
Track Gauge | — |
Machine Height - Grouser Tip - Exhaust Stack | — |
Height - Grouser | — |
Machine Height - Grouser Tip - Ground Clearance | — |
Machine Height - Grouser Tip - Length of Track on Ground | — |
Note | *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in. |
Machine Height - Grouser Tip - EROPS (Top of Railing) | — |
Machine Height - Grouser Tip - Ground Clearance | — |
Height - Top of Roof-Mounted Precleaner | — |
Machine Height - Grouser Tip - Length of Track on Ground | — |
Height - Grouser | — |
Note | *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in. |
Machine Height - Grouser Tip - EROPS (Top of Railing) | — |
Track Gauge | — |
Machine Height - Grouser Tip - Exhaust Stack | — |
Width - Tractor - Over Trunnions | — |
Length - Basic Tractor - With Striker Bars with Two Counterweights* | — |
Without Trunnions - Standard Shoe Width | — |
Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser* | — |
8 U Landfill | — |
8 SU LGP Landfill | — |
8 SU Landfill | — |
8 SU LGP Landfill | — |
8 SU Landfill | — |
8 U Landfill | — |
2 Forward | — |
1 Reverse | — |
3 Forward | — |
3 Reverse | — |
1 Forward | — |
2 Reverse | — |
Data not available.