Overview
New Cat C-Series Wheel Skidders with ACERT™ Technology offers maximum productivity, reliability and lower owner and operating cost while meeting Tier3 emission standard regulations.
Specifications
Units:
| Thinning - Capacity | — |
| Sorting Capacity | — |
| Engine Model | Cat© C7 ACERT™ |
Specifications
Units:
| Engine Model | Cat© C7 ACERT™ |
| Net Power - ISO 9249 | — |
| Net Power - SAE J1349 | — |
| Net Flywheel Power | — |
| Displacement | — |
| Bore | — |
| Stroke | — |
| Maximum Torque at Rated Speed | 896 N-m at 1400 RPM |
| Derating Altitude | — |
| Air Cleaner | Dry precleaner |
| Alternator | 80 amp |
| Fan Speed | — |
| Fan Type | Blower |
| Electrical System | 24V |
| Battery Quantity | 2 |
| Battery - Volts | 12V |
| Battery Capacity | 950 CCA |
| Starting System | Direct electric |
| Number of Cylinders | 6 |
| Engine Make | Caterpillar |
| Gross Power - SAE J1995 | — |
| Travel Speed - Forward 1 | — |
| Travel Speed - Forward 2 | — |
| Travel Speed - Forward 3 | — |
| Travel Speed - Forward 4 | — |
| Travel Speed - Forward 5 | — |
| Travel Speed - Reverse 1 | — |
| Travel Speed - Reverse 2 | — |
| Travel Speed - Reverse 3 | — |
| Torque Converter Type | Lock-up clutch |
| Transmission | 5 fwd / 3 rev countershaft, powershift |
| Steering, Frame Articulation | +/- 45° |
| Brakes - Service Type | Single disc WET enclosed |
| Brakes - Parking Type | Drum brake on rear output of transmission drop box |
| Transmission Cooler Type | Plate |
| Circuit Type | Closed center, variable flow |
| Pump Type | Axial piston |
| Pump Output | — |
| Relief Valve Setting | — |
| Reservoir Tank Capacity | — |
| Steering Valve | Direct link, non-follow |
| Steering Cylinder - Bore | — |
| Steering Cylinder - Stroke | — |
| Steering Cylinder - Rod Diameter | — |
| Dozer Valve | Electro-hydraulic |
| Dozer Cylinder - Bore | — |
| Dozer Cylinder - Stroke | — |
| Dozer Cylinder - Rod Diameter | — |
| Grapple Valve | 4 or 5 stack, pilot |
| Thinning - Capacity | — |
| Sorting Capacity | — |
| Bunching - Capacity | — |
| Grapple Capacity | — |
| Tip to Tip Height | — |
| Tong Ppening | — |
| Full Open Height | — |
| Minimum Stem Diameter | — |
| Full Closed Height | — |
| Grapple Capacity | — |
| Tip to Tip Height | — |
| Tong Ppening | — |
| Full Open Height | — |
| Minimum Stem Diameter | — |
| Full Closed Height | — |
| Dual Function - Reach Maximum | — |
| Single Function - Reach Maximum | — |
| Lift Highest, Retracted | — |
| Lift Highest, Farthest | — |
| Lift Maximum Reach | — |
| Lift Lowest, Retracted | — |
| Lift Lowest, Farthest | — |
| Loaded Tire Radius | — |
| Reach - Highest, Retracted | — |
| Reach - Lowest, Retracted | — |
| Reach - Lowest, Farthest | — |
| Reach - Highest, Farthest | — |
| Reach - Maximum | — |
| Lift Highest, Retracted | — |
| Lift Lowest, Farthest | — |
| Loaded Tire Radius | — |
| Reach - Highest, Retracted | — |
| Reach - Lowest, Farthest | — |
| Maximum Line Pull - Bare Drum | — |
| Maximum Line Speed | — |
| Drum Capacity - 19.0 mm (3/4 in) | — |
| Drum Capacity - 22.2 mm (7/8 in) | — |
| Drum Capacity - 25.4mm (1 in) | — |
| Drum Diameter | — |
| Drum Width | — |
| Maximum Line Pull - Bare Drum | — |
| Maximum Line Speed | — |
| Drum Capacity - 19.0 mm (3/4 in) | — |
| Drum Capacity - 22.2 mm (7/8 in) | — |
| Drum Capacity - 25.4mm (1 in) | — |
| Drum Diameter | — |
| Drum Width | — |
| Fuel Tank | — |
| Cooling System | — |
| Differential - Final Drives - Front | — |
| Differential - Final Drives - Rear | — |
| Engine Oil | — |
| Transmission - Torque Converter | — |
| Mechanical Winch | — |
| Hydraulic System - Tank | — |
| Hydraulic System - Total | — |
| Length | — |
| Overall Width | — |
| Height | — |
| Ground Clearance | — |
| Top Roller Height - Cable | — |
| Axle Height | — |
| Rear Axle - Pin | — |
| Length - Overall, Grapple, Dual | — |
| Decking Blade Lift Height | — |
| Decking Blade Dig Depth | — |
| Height - Top of Cab | — |
| Decking Blade Width | — |
| Tread Width | — |
| Turning Radius - Over Tires | — |
| Wheel Base | — |
| Est. Operating Weight | — |
| Spec Date | 5/06 |
Benefits & Features
Data not available.
Standard Equipment
- Electrical
- 24V electrical system
- Alarm, back-up
- Alternator, 80 amp
- Batteries, maintenance free (2-1000CCA)
- Lighting system, exterior lights (4 total)
- Main disconnect switch
- Starter, electric, heavy duty
- Starting and charging system
- Diagnostic connector
- Horn, warning
- Operator Environment
- 12V accessory power port
- Seat, air suspension
- Beverage holder
- Cab, ROPS/FOPS certified
- Computerized Monitoring System
- Power Train
- Air cleaner, 2-stage with precleaner
- Brakes
- Differential locks (front, rear)
- Driveline slipjoint, lubed for life
- Engine, Cat C7, ACERT Technology, ATAAC
- Fan, blower
- Filters, fuel/engine air, primary/secondary
- Final drives, inboard planetary
- Fuel transfer pump (electric)
- Fuel tank, high capacity
- Lock-up torque converter
- Muffler
- Radiator with clean-out doors
- Steering, variable flow-modulated 1/4 turn
- Transmission, countershaft powershift (5F/3R)
- Universal joints, lubed for life
- Hydraulics
- Closed center-load sensing system
- Hitch hoses, Caterpillar ToughGuard™
- Line filter, full flow return
- Hydraulic oil cooler, Spin-on filters
- Variable displacement piston pump, 46 gal/min (174.1 L/min)
- Other standard equipment
- Articulation lock link
- Brush sweeps, front
- Decking blade with replaceable bolt-on cutting edge
- Ecology drains (engine, hyd tank, axles, transmission)
- Engine enclosures, hinged
- Guards, hinged - bottom and radiator
- S•O•SSM sampling ports
- Vandalism protection, lockable doors and cap locks
Optional Equipment
- Power Train
- Standard Gross Power - 146 kW (196 hp)
- Dual Gross Power
- Arch
- Dual function
- Single function
- Cable skidding
- Industrial arrangement
- Axles
- Heavy duty (wide tire/chains)
- Standard duty
- Blade
- Narrow decking
- Wide decking
- Extended decking
- Cab, enclosed, with window screens
- ROPS, open
- ROPS, enclosed with heat/AC
- Window screens
- Wipers, front and rear
- Electrical
- Converter, high capacity 12V, 10A continuous, 15A peak
- Jump start receptacle
- Grapples - Cat Continuous Rotation
- Bunching
- Sorting
- Thinning
- Lights
- Additional 8 (2 front, 2 rear, 2 per side)
- Tires and Tubes, set of four, logger (LS-2)
- 30.5L-32, 20 PR
- 30.5L-32, 26 PR
- 35.5L-32, 20 PR
- 35.5L-32, 26 PR
- Dual ring capable
- Narrow overall width options
- Winch
- Grapple
- Cable skidding