Cat Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton.<br>The new 986K continues the legacy of durability, performance, safety, operator comfort, serviceability and sustainability.
Net Power | — |
Operating Weight | — |
Bucket Capacities | 5.4 m³ (7 yd³) |
Net Power | — |
Engine Model | Cat® C15 ™ |
Emissions | U.S. EPA Tier 4 Final/EU Stage V, or China Nonroad Stage III and Brazil MAR-1 and equivalent to U.S. Tier 3 and EU Stage IIIA |
Gross Power - ISO 14396 | — |
Peak Power Speed - 1,600 rpm - SAE J1995 | — |
Peak Power Speed - 1,600 rpm - SAE J1995 (DIN) | — |
Peak Power Speed - 1,600 rpm - ISO 14396 | — |
Peak Power Speed - 1,600 rpm - ISO 14396 (DIN) | — |
Rated Speed - 2,000 rpm - EEC 80/1269 | — |
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) | — |
Rated Speed - 2,000 rpm - ISO 9249 | — |
Rated Speed - 2,000 rpm - ISO 9249 (DIN) | — |
Rated Speed - 2,000 rpm - SAE J1349 | — |
Rated Speed - 2,000 rpm - SAE J1349 (DIN) | — |
Bore | — |
Stroke | — |
Displacement | — |
Peak Torque - 1,200 rpm - SAE J1995 | — |
Torque Rise | 16% |
Operating Weight | — |
Bucket Capacities | 5.4 m³ (7 yd³) |
Transmission Type | Cat-Planeten-Lastschaltgetriebe |
Forward - 1 | — |
Forward - 2 | — |
Direct Drive - Forward 2 | — |
Direct Drive - Forward 3 | — |
Direct Drive - Forward 4 | — |
Reverse - 1 | — |
Reverse - 2 | — |
Direct Drive - Reverse 2 | — |
Direct Drive - Reverse 3 | — |
Direct Drive - Reverse 4 | — |
Lift/Tilt System - Circuit | Load Sense |
Lift/Tilt System - Pump | 2 × 110 cc variable displacement |
Maximum Flow at 2,165 rpm | — |
Relief Valve Setting - Lift/Tilt | — |
Lift Cylinder - Bore | — |
Lift Cylinder - Stroke | — |
Tilt Cylinder - Bore | — |
Tilt Cylinder - Stroke | — |
Rack Back | — |
Raise | — |
Dump | — |
Lower | — |
Lower Float Down | — |
Total Hydraulic Cycle Time | — |
Fuel Tank | — |
Cooling Systems | — |
Crankcase | — |
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage IV Only) | — |
Transmission | — |
Axle Oil - Differentials and Final Drives - Front | — |
Axle Oil - Differentials and Final Drives - Rear | — |
Hydraulic System Factory Fill | — |
Hydraulic System - Tank Only | — |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Front | Fixed |
Rear | Trunnion |
Oscillation Angle | ±12.5° |
Oscillation Angle - Chain Arrangement | ±8.5° |
Brakes | ISO 3450: 2011 |
ISO 5010:2007 - Steering System - Circuit | Load Sense |
ISO 5010:2007 - Steering System - Pump | Piston, variable displacement |
ISO 5010:2007 - Maximum Flow at 1,400 rpm | — |
ISO 5010:2007 - Steering Cutoff Pressure | — |
ISO 5010:2007 - Total Steering Angle | 70° |
ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) |
Operator Sound Level (ISO 6396) | — |
Machine Sound Level (ISO 6395) | — |
Note | <ul><li>The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.</li><li>Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.</li><li>The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.</li></ul> |
Operator Sound Level (ISO 6396) | — |
Machine Sound Level (ISO 6395) | — |
Note | <ul><li>The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.</li><li>Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.</li><li>The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.</li></ul> |
Ground to Top of ROPS | — |
Ground to Top of Exhaust Stacks | — |
Ground to Top of Hood | — |
Ground to Center of Rear Axle | — |
Ground to Fuel Tank Clearance | — |
Ground to Lower Hitch Clearance | — |
Reach at Maximum Lift | — |
Clearance at Maximum Lift | — |
B-Pin Height at Maximum Lift | — |
Maximum Overall Height, Bucket Raised | — |
Rear Axle Center Line to Bumper | — |
Wheel Base | — |
Maximum Overall Length | — |
Front Axle Centerline to Bucket Tip | — |
Ground to Top of ROPS | — |
Ground to Top of Exhaust Stacks | — |
Ground to Top of Hood | — |
Ground to Center of Rear Axle | — |
Ground to Fuel Tank Clearance | — |
Ground to Lower Hitch Clearance | — |
B-Pin Height at Maximum Lift | — |
Rear Axle Center Line to Bumper | — |
Wheel Base | — |
Maximum Overall Length | — |
Front Axle Centerline to Bucket Tip | — |
To ensure long life and reliability, the linkage pin joints feature a greased pin design with optional auto lube system.
Set Point for Neutralization – Start of service brake pressure modulation
Full Pedal Travel – Maximum brake pressure
Your operators can work more efficiently and stay comfortable with our customer-inspired cab features.
Integrated electronics provide flexible levels of information to both the site and the operator. This integration creates a smart machine and more informed operator, maximizing the productivity of both.
Tire pressure monitoring is a fully integrated feature which allows operators to monitor inflation of tires. Available through the Information Display, the operator can quickly see the current pressure settings and temperature of each tire.
We are constantly improving our products in an effort to provide a safe work environment for the operator and those who work on your job site.
The 986K Block Handler delivers stability and durability with an optimized counterweight for block handling applications.
The Block Handler includes an additional hydraulic valve with the Quick Coupler, allowing the operator to switch work tools and immediately lock the work tool during load and carry applications.
The 986K Block Handler comes equipped with larger tilt cylinders on the linkage that help improve load control and ensure safe and long lasting operation.
Ride control works by using an accumulator to dampen the linkage motion, acting as a shock absorber. It provides the operator with a smoother ride over rough terrain, enabling a more comfortable ride at higher speeds.
The 986K Block Handler linkage is designed specifically for block handling applications. The linkage layout maximizes machine stability by keeping the payload close to the front tires and pin locations are designed to optimize performance with a quick coupler and fork.
Caterpillar block handling tools are the solution for handling large block and boulders in the demanding environment of quarry applications. Easy to interchange tools complement each other to provide solutions were mostly needed.
Can be used on block handling arrangements that have a hydraulic system equipped with a third valve. This quick coupler is designed for optimal utilization of lifting and break-out forces equipped with Caterpillar cylinder, safety valves, pressure and isolation valves, safety covers and lock-indicators. It has enhanced visibility and has been optimized for handling large rocks and blocks.
Heavy-duty pallet forks are engineered to handle weight and load stress when maneuvering and placing blocks in quarry operations. Dual tine forks are designed to allow blocks to be placed close to the machine for greater balance and safe handling.
Heavy-duty bucket which offers superior durability, protection and performance in rock and overburden operations in block quarries. It includes large size teeth and segments. Its (high wear resistant) metal shell and bottom offer maximum strength, durability and wear life.
Data not available.