Caterpillar offers Wheel Tractor-Scrapers designed exclusively for your coal stockpiling and retrieval needs. The Caterpillar® 657 Coal Bowl Scrapers can construct and maintain your coal stockpiles, as well as haul loads to your inlet supply system to meet the burn requirements of the plant.
Tractor Engine | Cat C18 |
Flywheel Power - Tractor/Scraper | 469kW (629 hp) / 353 kW (473 hp) |
Scraper Engine | Cat C15 |
Tractor Engine | Cat C18 |
Scraper Engine | Cat C15 |
Flywheel Power - Tractor/Scraper | 469kW (629 hp) / 353 kW (473 hp) |
Net Power | 469 kW/637 hp |
Gross Power (SAE J1995) | — |
Net Power (ISO 14396) | — |
Net Power (SAE J1349/ISO 9249) | — |
Bore | — |
Stroke | — |
Displacement | — |
Net Power | 353 kW/447 hp |
Gross Power (SAE J1995) | — |
Net Power (ISO 14396) | — |
Net Power (SAE J1349/ISO 9249) | — |
Bore | — |
Stroke | — |
Displacement | — |
Scraper Capacity - Heaped | — |
Rated Load | — |
Capacity - Struck | — |
Depth of Cut - Maximum | — |
Width - Cut - To Router Bits | — |
Ground Clearance - Maximum | — |
Hyd. Penetration Force - 657G | — |
Depth of Spread - Maximum | — |
Apron Opening | — |
Apron Closure Force | — |
Top Speed - Loaded | — |
1 Forward | — |
2 Forward | — |
3 Forward | — |
4 Forward | — |
5 Forward | — |
6 Forward | — |
7 Forward | — |
8 Forward | — |
Reverse | — |
Bowl Cylinder Bore | — |
Bowl Cylinder Stroke | — |
Apron Cylinder Bore | — |
Apron Cylinder Stroke | — |
Steering Circuit (@ High Idle) | — |
Cushion Hitch Circuit | — |
Secondary Steering Circuit | — |
Relief Valve - Steering Circuit | — |
Relief Valve - Implement Circuit | — |
Compensator Settings - Cushion Hitch Circuit | — |
Width - 180° Turn - Right | — |
Width - 180° Turn - Left | — |
Steering Angle - Right | 90 |
Steering Angle - Left | 85 |
Crankcase | — |
Transmission | — |
Differential | — |
Final Drive - Each | — |
Cooling System | — |
Hydraulic Reservoir | — |
Windshield Washer | — |
Fuel Tank - 657G | — |
Crankcase | — |
Transmission | — |
Differential | — |
Final Drive - Each | — |
Cooling System | — |
Width - Overall Machine | — |
Width - Tractor | — |
Width - Rear Tire Center Lines | — |
Width - Inside of Bowl | — |
Width - Outside Bowl - Shipping Width | — |
Height - Overall Shipping | — |
Height - Top of Cab | — |
Ground Clearance - Tractor | — |
Front of Tractor to Front Axle | — |
Axle to Vertical Hitch Pin | — |
Height - Scraper Blade Maximum | — |
Wheel Base | — |
Length - Overall Machine | — |
Rear Axle - Rear of Machine | — |
Total Shipping | — |
Tractor Shipping | — |
Scraper Shipping | — |
Total Operating - Empty | — |
Front Axle | — |
Rear Axle | — |
Total Operating - Loaded | — |
Front Axle - Loaded | — |
Rear Axle - Loaded | — |
• Large capacity coal bowl scrapers are longer and higher than
standard open bowl scrapers.
• Purpose-built coal bowl dual engine scrapers deliver faster cycle
times with maximum payloads.
• High ground speed provides the ability to manage stockpiles.
• Machine is designed for loading, hauling, and compaction for
complete functionality.
• Work effectively in poor underfoot conditions and climb slippery
piles and loose coal with all-wheel drive (AWD).
• Coal bowl scrapers provide effective coal compaction, which
reduces the risk of spontaneous combustion in coal stockpiles by
eliminating the air spaces.
• Specialty coal bowl scrapers are optimized for maximum machine
productivity and efficiency.
• Improve productivity by up to 6%.
• Move more material with Advanced Productivity Electronic Control
System (APECS), which allows the machine to better utilize engine
power and torque.
• Set the desired top speed with Ground Speed Control, and the
machine will find the gear that works best for the engine and the
transmission, providing a lower fuel burn.
• The Machine Speed Limit feature replaces Top Gear Selection.
• Auto-Stall assists in quickly bringing the transmission to an
operating temperature at start-up when working in colder climates.
• Steer with less effort with the newly designed high-pressure
steering system.
• Reduce up to 14 individual operator commands per cycle with
Sequence Assist (optional attachment).
• Enjoy interior improvements and a more ergonomic work
environment with a 21% larger cab than the 657 G-Series cabs.
• Intuitive, ergonomic controls with multifunction display keep
operators focused on their work.
• Maintain desired cab temperature with automatic temperature
control.
• Get in and out of the cab easier with the new powered access
ladder system (optional attachment).
• Enhance the operator’s awareness of site surroundings with the
optional Work Area Vision System (WAVS).
• Centralized service locations allow for easier and safer
maintenance.
• Seat belt indicator provides visual and audible alerts when the seat
belt is not in use.
• Cat Advance Ride Management (ARM) seat suspension reduces end
stroke movement of the load cylinder for a smoother ride.
• Engine overspeed protection will automatically engage with no
operator input when the machine is in eighth gear. The machine
will assist in slowing the machine speed by canceling the throttle
command and engaging the engine compression brake.
• Access information anytime, anywhere with Vision Link®– use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your
jobsite.
• Product Link™collects machine data that can be viewed online through web and mobile applications.
• The Cat C18 tractor and C15 scraper engines meet U.S. EPA Tier 4 Final or EU Stage V emission standards, contributing to lower fuel consumption.
• Using draft-arm overflow guards diverts material away from the bowl, preventing material from getting caught between the draft arms and the bowl sides.
• The new tractor hydraulic demand fan helps lower fuel consumption.
Data not available.