The Cat® 120M Motor Grader is designed to help you get more work done in less time. Unprecedented operator comfort and ease of service help to maximize your return on investment.
Base Power (1st Gear) - Net | — |
Operating Weight - Typically Equipped | — |
Blade Width | — |
Base Power (1st Gear) - Net | — |
Engine Model | Cat C6.6 ACERT™ |
Speed at Rated Power | 2,000 rpm |
VHP Plus Range - Net - Metric | 103-136 kW (140-185 hp) |
Emissions | U.S. EPA Tier 3/EU Stage IIIA equivalent |
Standard - Fan Speed - Minimum | 600 rpm |
High Ambient - Fan Speed - Minimum | 600 rpm |
Maximum Torque - VHP Plus - Net | — |
VHP Plus Range - Net | 103-136 kW (138-182 hp) |
Base Power (1st Gear) - Net - Metric | — |
High Ambient - Fan Speed - Maximum | 1,650 rpm |
Torque Rise - VHP Plus | 40% |
Standard - Fan Speed - Maximum | 1,150 rpm |
Note (5) | No engine derating required up to 3048 m (10,000 ft). |
Note (2) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Note (3) | Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan running at minimum speed, air cleaner, muffler and alternator. |
Note (1) | Maximum torque (VHP Plus) measured at 1,400 rpm. |
Note (4) | Power as declared per ISO 14396: Rated Speed = 2,000 rpm; VHP Plus = 175 kW (234 hp) |
Number of Cylinders | 6 |
Derating Altitude | — |
High - Ambient Capability | — |
Drawbar - Width | — |
Front Axle - Wheel Lean - Left/Right | 18° |
Front Frame Structure - Width | — |
Circle - Diameter | — |
Front Frame Structure - Height | — |
Drawbar - Height | — |
Front Axle - Total Oscillation per Side | 32° |
Blade Width | — |
Arc Radius | — |
Throat Clearance | — |
Moldboard - Height | — |
Moldboard - Width | — |
Maximum Depth of Cut | — |
Moldboard Sideshift - Right | — |
Maximum Lift Above Ground | — |
Blade Tip Range - Forward | 40° |
Circle Centershift - Left | — |
Moldboard Sideshift - Left | — |
Circle Centershift - Right | — |
Maximum Shoulder Reach Outside of Tires - Left | — |
Blade Tip Range - Backward | 5° |
Maximum Shoulder Reach Outside of Tires - Right | — |
Operating Weight - Typically Equipped | — |
Gross Vehicle Weight - Maximum - Front Axle | — |
Gross Vehicle Weight - Base - Total | — |
Gross Vehicle Weight - Typically Equipped - Front Axle | — |
Gross Vehicle Weight - Maximum - Rear Axle | — |
Gross Vehicle Weight - Typically Equipped - Rear Axle | — |
Gross Vehicle Weight - Typically Equipped - Total | — |
Gross Vehicle Weight - Base - Front Axle | — |
Gross Vehicle Weight - Maximum - Total | — |
Gross Vehicle Weight - Base - Rear Axle | — |
Data not available.