Overview
The Cat® CB44B is an 8 ton roller with 1500 mm (59") tandem vibratory drums. It excels on a variety of asphalt mix designs as well as other granular materials. It features exceptional visibility and control, smooth operating powertrain, versatile vibratory systems, Cat Compaction Control, and the industry leading water spray system.
Specifications
| Operating Weight | — |
| Standard Compaction Width | — |
| Gross Power | — |
Benefits & Features
Specifications
| Operating Weight | — |
| Operating Weight - At Rear Drum with ROPS/FOPS | — |
| Operating Weight - At Front Drum with ROPS/FOPS | — |
| Operating Weight - With Cab | — |
| Maximum Weight at Rear Drum | — |
| Operating Weight - With ROPS/FOPS | — |
| Maximum Weight at Front Drum | — |
| Standard Compaction Width | — |
| Curb Clearance | — |
| Turning Radius - Inside Drum Edge | — |
| Ground Clearance | — |
| Maximum Compaction Width | — |
| Travel Speed - Maximum | — |
| Static Linear Load | — |
| Gross Power | — |
| Bore | — |
| Stroke | — |
| Engine Model | Cat® C3.4B with ACERT Technology |
| Overall Length | — |
| Wheel Base | — |
| Height - With ROPS/FOPS | — |
| Compaction Width | — |
| Overall Width | — |
| Drum Width | — |
| Drum Diameter | — |
| Drum Width | — |
| Drum Diameter | — |
| Frequency | — |
| Vibration Selection | Independent per drum, front only, rear only, both |
| Eccentric Weight Drive | Hydraulic direct, auto reversing |
| Centrifugal Force per Drum - Maximum | — |
| Nominal Amplitude - Low | — |
| Nominal Amplitude - High | — |
| Centrifugal Force per Drum - Minimum | — |
| Fuel Tank Capacity | — |
| Water Spray Tank Capacity | — |
Benefits & Features
Exceptional Visibility and Control
Comfortable Operating Station
The machine controls and LCD display are integrated with the pivoting adjustable seat, and move with the operator. Seating options include vinyl for open-platform configurations and cloth for cab, both can be equipped with a heated option. An optional deluxe highback air-ride seat is also available. Other comfort features include a vibration-absorbing floor mat, 12-volt power receptacle that supports communication devices, wide-width seat belt, cup holders and a lockable storage compartment.
Fingertip Control
The multi-function propel lever with integrated controls for water spray on/off, drum offset, vibratory control, and optional edge cutter height adjustment enables the operator to work with confidence.
LCD Display
The back-lit LCD display includes machine data and diagnostics. It is integrated with the seat, so it remains in same position even as the seat pivots. A built-in lockable anti-vandalism cover offers protection. The display provides multiple language options, split-screen capability, and indicators for ground speed, vibrations per minute, and fuel level.
Convenient Console
The console is integrated with the seat, providing fingertip access. Soft keys with tactile feel provide instant feedback to the operator for intuitive operation. The armrests are adjustable and can be tailored to the operator for additional comfort.
Vibratory System
Split Drum Design
The exclusive split-drum design delivers excellent mat quality in urban environments when frequent turning is required. When turning, the outside drum half rotates faster than the inside drum, eliminating the potential for shoving and tearing that occurs on standard vibratory drum designs. The exclusive axle-type pod design utilizes tapered roller bearings that support each drum half and eliminates any potential for contact between the two halves.
Dual Amplitude/Dual Frequency Vibratory System
The dual amplitude, dual frequency vibratory system can be tailored to thin and thick lifts. A single switch automatically matches amplitude and frequency for simple operation.
Performance Features
The vibratory system offers multiple options that help fine-tune performance. The automatic speed control feature makes it easier to maintain consistency and impact spacing requirements. Also, an auto vibe function helps prevent over-compaction and contributes to uniformity.
Cat® Compaction Control
Temperature Sensors
Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.
Pass-Count Mapping
Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.
Temperature Mapping
Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.
Smooth Operating Powertrain
Cat® C3.4B Engine
The C3.4B engine provides 75 kW (102 hp) of power and meets U.S. EPA Tier 4 Interim and EU Stage IIIB emission standards. It features an electronic control module (ECM), providing optimal performance through precisely synchronized timing and fuel delivery. The ECM enables advanced troubleshooting and diagnostic capabilities using Electronic Technician (Cat ET). Cat dealers are the single-source providers of all machine and engine warranty service (a Cat exclusive).
High Capacity Cooling System
The large capacity cooling system keeps the operating temperatures low, even in extreme conditions. Two high volume fans direct warm air away from the operator for a more comfortable operating environment.
Data not available.
Optional Equipment
- Cat® Compaction Control
- Edge Cutter
- ROPS/FOPS Cab
- Offset Hitch
- Water Distribution Mats
- Cocoa Mats
- Water Spray Freeze Protection Kit
- High Intensity Discharge Lights
- Warning Beacon
- External Mirrors
- Bio-Degradeable Oil
- Product Link
- Drum Edge Lighting Package
- High Ambient Cooling System
- Air Suspension Seat w/heat