/  Equipment  /  Compactors  /  Landfill Compactors

826

826 - 2023, Global

Overview

Cat Landfill Compactors are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to operate more efficiently and safely. Introduced in 1978, the 826 has been an industry leader for over 45 years. Focused on helping our customers succeed, we have continued to build upon each new series. The 826 continues our legacy of reliability, performance, safety, operator comfort, serviceability, and efficiency.

Specifications

Units: 
Gross Power - SAE J1995:2014
Net Power - SAE J1349:2011
Net Power – ISO 9249:2007
See more

Benefits & Features

OPERATOR COMFORT AND CONTROL

TOP-TIER SERVICE AND SUPPORT

EFFICIENCY AND PRODUCTIVITY

  September 12, 2024

Specifications

Units: 
Engine
Gross Power - SAE J1995:2014
Net Power - SAE J1349:2011
Net Power – ISO 9249:2007
Engine Power - ISO 14396:2002
Engine Model C15 Cat®
Emissions U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed 1800
Peak Torque (1,300 rpm)
Torque Rise 33%
Bore
Stroke
Displacement
High Idle Speed
Low Idle Speed
Maximum Altitude – Without Derating (Tier 4 Final/Stage V)
Maximum Altitude - Without Derating (Tier 3/Stage IIIA)
Note Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications
Operating Weight (Tier 4 Final/Stage V)
Operating Weight (Tier 3/Stage IIIA equivalent)
Maximum Operating Weight (Tier 4 Final/Stage V)
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
Transmission
Transmission Type Planetary - Powershift - ECPC
Direct Drive - Forward 1
Direct Drive - Forward 2
Direct Drive - Reverse 1
Direct Drive - Reverse 2
Hydraulic System
Pump Flow at 1800 rpm
Main Relief Pressure
Maximum Supply Pressure
Lift System Double Acting Cylinder
Bore
Stroke
Service Refill Capacities
Cooling System
Engine Crankcase
Transmission
Fuel Tank
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
Differential - Final Drives - Front
Differential - Final Drives - Rear
Hydraulic Tank Only
Note All nonroad Tier 4 Final and Stage V diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications.– Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required.– Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Axles
Front Planetary - Fixed
Rear Planetary - Oscillating
Oscillation Angle ±5°
Braking System
Service Brakes Multi Disc Wet (Enclosed) 2 WHL
Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final/EU Stage V
Operator Sound Level (ISO 6396:2008) - Standard
Machine Sound Level (ISO 6395:2008) - Standard
Operator Sound Level (ISO 6396:2008) - Suppression
Machine Sound Level (ISO 6395:2008) - Suppression
Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (2) The machine sound power level was measured according to the test ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (3) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Level (ISO 6396:2008) - Standard
Machine Sound Level (ISO 6395:2008) - Standard
Operator Sound Level (ISO 6396:2008) - Suppression
Machine Sound Level (ISO 6395:2008) - Suppression
Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (2) The machine sound power level was measured according to the test ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (3) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Hydraulic System - Steering
Steering System - Circuit Double Acting - End Mounted
Bore
Stroke
Steering System - Pump Piston - Variable Displacement
Maximum System Flow 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
Steering Pressure Limited
Vehicle Articulation Angle
Dimensions (Approximate)
Height to Top of Air Conditioning Condenser
Height - Cab Roof
Height - Top of Beacon
Height - Top of Exhaust Pipe
Height - Top of Hood
Ground Clearance - Bumper
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard
Hitch to Centerline of Front Axle
Wheel Base
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard
Ground Clearance
Width - Over Wheels
Turning Radius - Inside of Wheels
Straight Blade
Width – Moldboard Length
Width - Over End Bits
Height with Cutting Edge and Screen
Maximum Depth of Cut
Maximum Lift above Ground
Capacity, Rated
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
Semi U-Blade
Width – Moldboard Length
Width - Over End Bits
Height with Cutting Edge and Screen
Maximum Depth of Cut
Maximum Lift above Ground
Capacity, Rated
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
U-Blade
Width – Moldboard Length
Width - Over End Bits
Height with Cutting Edge and Screen
Maximum Depth of Cut
Maximum Lift above Ground
Capacity, Rated
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
Wheels
Combination Tips (Weight Group)
Plus Tips - Weight (Group)
Paddle Tips - Weight (Group)
Diamond Tips Weight (Group)
Outside Diameter
Outside Diameter - Diamond
Drum Diameter
Drum Width
Feet Per Row 6
Feet Per Wheel 30
Replaceable Weld On
Width Over Drums
Tip Height
Tip Height - Diamond

Benefits & Features

OPERATOR COMFORT AND CONTROL

          
    • Flip-up armrest for easy ingress/egress.
    •     
    • Keep your operators informed about machine conditions and operation with Vital Information Management System (VIMS™) 3G machine monitoring system.
    •     
    • Enhanced visibility with standard rearview camera.
    •     
    • Preferred temperature settings maintained with automatic climate control.
    •     
    • Cat Premium Plus seat with standard features, including leather finish, forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, and dynamic end dampening to provide total comfort throughout the workday.
    •     
    • Low spectator sound levels and optional low sound packages.

TOP-TIER SERVICE AND SUPPORT

          
    • Easy access in a controlled environment; electronics bay is located inside the cab.
    •     
    • Focused on safety with ground level or platform access to most major components.
    •     
    • Ground level: engine shutdown switch, lockable battery disconnect, and auxiliary start.
    •     
    • Quick visual inspection and minimized fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
    •     
    • Electronic air inlet restriction indicator.
    •     
    • Designed for ease of service and inspection.
          – Hydraulic oil cooler, fuel cooler, and roof-mounted condenser
          – Centralized grease points
    •     
    • Operators and technicians can resolve any problems before failure using VIMS.
    •     
    • Guarding around the axles mitigates risk of damaged components.

EFFICIENCY AND PRODUCTIVITY

          
    • Improved performance, long life, low emissions.
    •     
    • High productivity and fuel efficient.
    •     
    • Two engine options available that meet U.S. EPA Tier 4 Final and  EU Stage V emission standards or emitting equivalent to U.S.  EPA Tier 3 and EU Stage IIIA.
    •     
    • For the Tier 4 Final, EU Stage V option, the Cat Clean Emissions Module contains a diesel oxidation catalyst, diesel particulate filter, and Cat Regeneration System, utilizing selective catalytic reduction (SCR) technology.
    •     
    • Regeneration is completely automatic and does not interrupt the machine’s work cycle.
    •     
    • Experience maximum responsiveness and control with Steering and Transmission Integrated Control (STIC™) system.
    •     
    • Conserve more fuel with the automatic engine and electrical system shutdown.
    •     
    • Achieve greater momentum on grades and fuel savings by carrying that momentum through the shift points advanced productivity electronic control system (APECS) transmission controls.
    •     
    • Operators experience less fatigue with throttle lock to maintain engine speed.
    •     
    • Equipped with Cat torque converter with lock-up clutch which eliminates torque converter (TC) losses while lowering system heat and transfers more power to the ground.
    •     
    • Torque converter with lock-up clutch eliminates torque converter losses while lowering system heat. Improves travel speeds and increases fuel efficiency.
    •     
    • Lock-up torque converter transfers more power to the ground and optimizes fuel efficiency in all applications.

PRODUCTIVITY WITH TECHNOLOGY

          
    • Compact technology combines advanced compaction measurement, in-cab guidance, and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and in fewer passes – saving on fuel and the cost of unnecessary rework.
    •     
    • Link technology (standard) provides access to machine location, hours, fuel consumption, idle time, events, and diagnostic codes through the online VisionLink® interface.
    •     
    • Improved productivity with optional Cat Compact with Elevation Mapping.

LONG TERM VALUE AND DURABILITY

    Working in the toughest application, the purpose-built 826 Landfill Compactor has specialized waste guarding to protect key components and systems from damage, debris, chemicals, premature wear, or wrapping of the material around components. This additional guarding includes:
          
    • Engine and Powertrain Guards – Hydraulically actuated guards help prevent trash buildup and shield components.
    •     
    • Front Frame Guards – Front frame guards prevent trash buildup inside the frame. This guard further protects components and hydraulic lines.
    •     
    • Axle Wrapping and Seal Guarding – The guarding prevents material from wrapping and binding around the axles, as well as assists in ease of cleaning.
    •     
    • Major System Guarding and Sight Gauges – Transmission oil tube is guarded to resist damage from debris. The sight gauge for the transmission is visible from ground level. The fuel tank is positioned away from the debris in the front frame and is easily accessed.
    •     
    • Air Inlet Screen – The vertically corrugated, fine-mesh air inlet screen helps reduce trash from entering the radiator area and allows for debris to fall off.
    •     
    • Striker Bars and Optional Cleaner Fingers – Striker bars are located in front of and behind the rear wheels and behind the front wheels. Striker bars help to keep wheels free of debris to assist the wheel step tips in maintaining good compaction. In cohesive material or severe packing conditions, optional cleaner fingers are available to further assist in keeping the wheel step tips clean.
    •     
    • Extended Roof – An oversized roof extends past the cab doors and windows to minimize debris buildup.
    •     
    • Under Hood Ventilation System – Creates a neutral pressure environment to prevent trash ingestion from hood openings while providing fresh air to the alternator, electronics, and turbo.

WHEEL TIPS BUILT TO PERFORM

          
    • Designed specifically to complement Cat machines.
    •     
    • Improves machine performance through longer wear life and maintaining traction.
    •     
    • Four wheel and tip configurations are available to meet your particular application:
          
    1. Paddle Tip – High performance and less fuel burn with more traction and less weight.
    2.     
    3. Plus Tip – Traditional design for increased side slope stability.
    4.     
    5. Combination Tip – Both paddle and plus tips provide the best compromise of performance and fuel economy with side slope stability.
    6.     
    7. Diamond Tip – Longest life tip on the market with reputation of reliability that is world class in the waste tip industry.

Standard Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • POWER TRAIN
    • Single Clutch Speed Shifting (SCSS)
    • Electronic Clutch Pressure Control (ECPC)
    • Air to air aftercooler
    • Brakes, full hydraulic, enclosed, wet multiple disc service brakes
    • Cat clean emission module (U.S. EPA Tier 4 Final/ EU Stage V only)
    • Muffler (under hood) (U.S. EPA Tier 3/EU Stage IIIA equivalent)
    • Electro-hydraulic parking brake
    • Engine, Cat C15 configured for two emissions options: Tier 4 Final/Stage V, or emitting equivalent to Tier 3/Stage IIIA
    • Fuel priming pump (electric)
    • Fuel to air cooler
    • Ground level engine shutoff
    • Heat shield, turbo and exhaust manifold
    • Hydraulically driven demand fan
    • Integrated braking system
    • Radiator, Aluminum Modular (AMR)
    • Separated cooling system
    • Starting aid (ether)
    • Throttle lock
    • Torque converter with Lock Up Clutch (LUC)
    • Eco Mode
    • Transmission, planetary, with 2F/2R speed range control
    • Under hood ventilation system
  • ELECTRICAL
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance-free (4 - 1,000 CCA)
    • Electrical system, 24V
    • Light, warning unswitched (LED strobe)
    • Lighting system, halogen (front and rear)
    • Lighting, access stairway
    • Lighting, underhood
    • Starter, electric (heavy duty)
    • Ground level lockable master disconnect switch
    • Auxiliary start receptacle
  • OPERATOR ENVIRONMENT
    • Camera, rear vision
    • Air conditioner with roof mounted condenser
    • Cab, sound-suppressed pressurized
    • Internal four-post rollover protective structure (ROPS/FOPS)
    • Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)
    • 12V power port for mobile phone or laptop connection
    • Radio, CB ready
    • Coat and hard hat hooks
    • Finger tip shifting controls
    • Flip-up armrest
    • Heater and defroster
    • Implement hydraulic lockout
    • Glass (window) - rubber mounted glass
    • Light, (dome) cab
    • Lunch box and beverage holders
    • Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage V) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
    • Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
    • Mirror, internal (panoramic)
    • Mirrors, heated, rearview (externally mounted)
    • Premium plus seat containing forced air heating and cooling, 2-way thigh adjustment, power lumbar and back bolster adjustment, ride stiffness adjustment, dynamic end dampening, and leather finish
    • Seat belt with minder, retractable, 76 mm (3 in) wide
    • STIC control system with lockout
    • Sun visor, front
    • Tinted glass
    • Transmission gear (indicator)
    • Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles
    • Wet-arm wipers/washers (front and rear)
    • Intermittent wipers (front and rear)
    • Precleaner, cab powered
    • Horn group (trumpet)
  • GUARDS
    • Guards, axle (front and rear)
    • Guard, cab window
    • Guard, driveshaft
    • Guards, crankcase and power train, hydraulically powered
    • Guard, differential (front and rear)
  • FLUIDS
    • Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
  • OTHER STANDARD EQUIPMENT
    • Demand fan/swing out (hydraulic reversible)
    • Doors, service access (locking)
    • Ecology drains for engine, radiator, transmission, hydraulic tank
    • Emergency platform egress
    • Engine, crankcase, 500 hour interval with CJ-4 oil
    • Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown
    • Fire suppression ready
    • Fuel tank, 782 L (207 gal)
    • Hitch, drawbar with pin
    • Hoses, Cat XT
    • Hydraulic, engine, and transmission oil coolers
    • Total hydraulic filtration system
    • Oil sampling valves
    • Oil change system, high speed
    • Steering, load sensing
    • Stairway, left and right rear access
    • Vandalism protection caplocks
    • Venturi stack
    • Fold down exhaust stack for shipping
  • TECHNOLOGY PRODUCTS
    • Product Link™ – Cellular, Satellite
  • SPECIAL ARRANGEMENTS
    • Engine: – Sound suppression
    • Engine precleaners - single stage
  • BLADES
    • Dozer arrangement (no blade)
  • WHEELS AND CLEANER BARS
    • Striker bars
    • Wheels and tips: wheel arrangements – 7" combination tips

Optional Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • OPERATOR ENVIRONMENT
    • Radio, AM/FM/Aux/USB/Bluetooth®
    • Cat Compact SBAS Mapping (available through SITECH only)
    • Cat Compact RTK Mapping (available through SITECH only)
  • GUARDS
    • Guard – rear fan and grill
  • POWER TRAIN
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
  • SPECIAL ARRANGEMENTS
    • Engine precleaners – dual stage
  • MISCELLANEOUS
    • CE/UKCA Certification (standard where regulations require it)
    • Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)
  • WHEELS AND CLEANER BARS
    • Striker bars with cleaner fingers
  • OTHER STANDARD EQUIPMENT
    • Stairway, swingout (LH & RH)

View 360