The Cat® 440 Backhoe Loader delivers improved machine performance, a superior hydraulic system, improved operator controls and ergonomics, and overall versatility.
Net Power - SAE J1349 | — |
Dig Depth - Standard | — |
Operating Weight - Maximum | — |
Adjustable Seat Mounted Controls improve ergonomics by increasing operator comfort and legroom. Operators have Loader and Backhoe Controls in the palm of their hands, whether they are facing the Loader, the Backhoe, or sitting off set. Variable Speed Steer reduces operator fatigue in applications, such as truck loading, by reducing the number of steering wheel rotations required to turn the machine. The new Spring Applied Hydraulically Released (SAHR) Parking Brake is controlled by simply pressing a button.
The Cat Backhoe Loader’s load sensing piston pump provides full hydraulic lifting and digging forces at any engine speed. Variable flow pump matches hydraulic power to work demands. The advanced hydraulic system allows the operator to adjust Loader and Backhoe Auxiliary Flow matching attachment specifications, program Loader Bucket Kickout and Return to Dig, and Enable Parallel Lift.
The Cat C4.4 ACERT™ engine delivers solid performance and meets U.S. EPA Tier 4 Final/EU Stage IV emission standards by utilizing Selective Catalytic Reduction technology with a Diesel Oxidation Catalyst. The new Backhoe design and optimized Loader Linkage increases lift capacity and breakout forces on both ends of the machine. A redesigned Loader System provides superior machine balance and stability regardless of the ground conditions.
Net Power - SAE J1349 | — |
Bore | — |
Stroke | — |
Displacement | — |
Net Peak Power - 1,800 rpm - ISO 9249 | — |
Ratings at 2,200 rpm - Gross Power SAE J1995 | — |
Gross Power - SAE J1995 | — |
Net Peak Power Rating - ISO 9249 at 1,800 rpm | — |
Net Torque Rise - 1,200 rpm | — |
Net Peak Power - 1,800 rpm - EEC 80/1269 | — |
Net Power - 2,200 rpm - SAE J1349 | — |
Gross Power - ISO 14396 | — |
Rated Net Power - 2,200 rpm - EEC 80/1269 | — |
Net Power Rating at 2,200 rpm - ISO 9249 | — |
Engine Model | C4.4 ACERT 87 kW (116 hp) Electronic – Turbo Intercooled |
Ratings at 2,200 rpm - Gross Power ISO 14396 | — |
Net Peak Power - 1,800 rpm - SAE J1349 | — |
Net Torque Rise - 1,400 rpm - SAE J1349 | — |
Net Peak Power Rating - SAE J1349 at 2,100 rpm | — |
Rated Net Power - 2,200 rpm - ISO 9249 | — |
Net Torque Rise - 1,400 rpm | 44% |
Power Rating Conditions - No De-Rating Required Up To | — |
Net Power Rating at 2,200 rpm - SAE J1349 | — |
Emissions | Engine meets U.S. EPA Tier 4 Final emission standards. |
Net Peak Torque SAE J1349 | — |
Note | No derating required up to 2286 m (7,500 ft). |
Operating Weight - Maximum | — |
Cab - ROPS/FOPS | — |
Air Conditioning | — |
Operating Weight - Estimated* | — |
MP Bucket (1.00 m3/1.31 yd3) - With Fold-Over Forks | — |
Loader Bucket - 1.34 m³ (1.75 yd³) MP ED (Hook-On) | +160 kg (+353 lb) |
Cab, ROPS/FOPS | +243 kg (+536 lb) |
Loader Bucket - 1.34 m³ (1.75 yd³) MP HD (Pin-On) | +214 kg (+472 lb) |
Extendible Stick | +301 kg (+664 lb) |
MP Bucket (1.00 m3/1.31 yd3) - Without Fold-Over Forks | — |
Loader Quick Coupler | +250 kg (+551 lb) |
Front Counterweight - Counterweights - Option 1 | — |
Note (2) | GP = General Purpose |
Loader Bucket - 1.53 m³ (2.0 yd³) GP (Hook-On) | –73 kg (–162 lb) |
Note (4) | HD = Heavy Duty |
Front Counterweight - Counterweights - Option 2 | — |
Operating Weight - Maximum - ROPS Capacity | — |
Counterweight | — |
Backhoe Quick Coupler | +87 kg (+192 lb) |
Loader Bucket - 1.34 m³ (1.75 yd³) MP HD (Hook-On) | +85 kg (+187 lb) |
Loader Bucket - 1.34 m³ (1.75 yd³) MP ED (Pin-On) | +290 kg (+639 lb) |
Note (1) | *Machine equipped with 340/80-18 front and 500/70-24 rear, AWD, OROPS, 1.34 m³ (1.75 yd³) general purpose bucket with bolt-on cutting edge, standard stick, 610 mm (24"") severe-duty backhoe bucket. |
Loader Bucket - 1.53 m³ (2.0 yd³) GP (Pin-On) | +80 kg (+176 lb) |
Loader Bucket - 1.34 m³ (1.75 yd³) GP (Hook-On) | –150 kg (–331 lb) |
Note (5) | ED = Extreme Duty |
Note (3) | MP = Multi Purpose |
Front Counterweight - Counterweights - Option 3 | — |
Rear Counterweight | — |
Dig Depth - Standard | — |
Pump Type | Variable Flow, Axial Piston |
System Pressure - Loader | — |
Pump Capacity at 2,200 rpm | — |
System Pressure - Hitch/Box Scraper | — |
Type | Closed Center |
System Pressure - Backhoe | — |
Autoshift Transmission - Reverse - 1st | — |
Power Shuttle Transmission - Forward 3rd | — |
Power Shuttle Transmission - Reverse 2nd | — |
Autoshift Transmission - Forward - 6th | — |
Power Shuttle Transmission - Reverse 4th | — |
Autoshift Transmission - Reverse - 3rd | — |
Power Shuttle Transmission - Forward 2nd | — |
Note | Travel speeds of backhoe loader in two wheel drive at full throttle, when equipped with 500/70-24 rear tires. |
Autoshift Transmission - Forward - 1st | — |
Autoshift Transmission - Forward - 3rd | — |
Autoshift Transmission - Forward - 4th | — |
Power Shuttle Transmission - Forward 4th | — |
Power Shuttle Transmission - Reverse 1st | — |
Autoshift Transmission - Forward - 2nd | — |
Power Shuttle Transmission - Forward 1st | — |
Autoshift Transmission - Reverse - 2nd | — |
Autoshift Transmission - Forward - 5th | — |
Power Shuttle Transmission - Reverse 3rd | — |
Hydraulic System | — |
Engine Oil - With Filter | — |
Rear Axle - Planetaries | — |
Cooling System with Cab Heater | — |
Hydraulic System (Minimum) | — |
Transmission - Power Shuttle - 2WD | — |
Cooling System with Air Conditioning | — |
Fuel Tank | — |
Transmission (Autoshift) - AWD, Autoshift | — |
Planetaries | — |
Rear Axle | — |
Transmission - Power Shuttle - 4WD | — |
Front Axle (Center Housing) | — |
Rear Axle (Center Housing) | — |
Hydraulic Tank (Nominal) | — |
Front Axle (4WD) - Planetaries | — |
Diesel Exhaust Fluid (DEF) | — |
Front Axle (4WD) | — |
Note | Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur |
Hydraulic Tank | — |
Rod Diameter | — |
Stroke | — |
Turning Circle (inner wheel not braked) - Outside Front Wheels | — |
Note | AWD cylinder, one (1) double-acting. |
Bore | — |
Turning Circle (inner wheel not braked) - Outside Widest Loader Bucket | — |
Power Steering | Hydrostatic HMU |
Type | Front Wheel |
Axle Oscillation | 11° |
Turning Circle - (inner wheel not braked) - Outside Front Wheels | — |
Turning Circle - (inner wheel not braked) - Outside Widest Loader Bucket | — |
Front Axle, AWD - Static | — |
Front Axle (4WD) - Dynamic | — |
Rear Axle - Static | — |
Rear Axle - Dynamic | — |
Front Axle, AWD - Dynamic | — |
Front Axle (4WD) - Static | — |
Dig Depth - Standard | — |
Standard Configuration of Front/Rear Tires | Front: 12.5 80/16.9; Rear: 16.9-24 |
Standard Stick - GP Loader Bucket - 4WD | — |
Standard Stick - MP Loader Bucket - 4WD | no counterweight |
Adjustable Seat Mounted Controls improve ergonomics by increasing operator comfort and legroom. Operators have Loader and Backhoe Controls in the palm of their hands, whether they are facing the Loader, the Backhoe, or sitting off set. Variable Speed Steer reduces operator fatigue in applications, such as truck loading, by reducing the number of steering wheel rotations required to turn the machine. The new Spring Applied Hydraulically Released (SAHR) Parking Brake is controlled by simply pressing a button.
The Cat Backhoe Loader’s load sensing piston pump provides full hydraulic lifting and digging forces at any engine speed. Variable flow pump matches hydraulic power to work demands. The advanced hydraulic system allows the operator to adjust Loader and Backhoe Auxiliary Flow matching attachment specifications, program Loader Bucket Kickout and Return to Dig, and Enable Parallel Lift.
The Cat C4.4 ACERT™ engine delivers solid performance and meets U.S. EPA Tier 4 Final/EU Stage IV emission standards by utilizing Selective Catalytic Reduction technology with a Diesel Oxidation Catalyst. The new Backhoe design and optimized Loader Linkage increases lift capacity and breakout forces on both ends of the machine. A redesigned Loader System provides superior machine balance and stability regardless of the ground conditions.
The all new Integrated Tool Carrier (IT Coupler) for Single Tilt Loader Arm configurations are available from the factory or for simple field installation. The Cat Backhoe Loader with Integrated Tool Carrier (IT Coupler) will be the most versatile machine on the job site providing quick connection to a variety of Cat Attachments.
A variety of Mechanical and Hydraulic Cat Backhoe Couplers are available from the factory or for field installation. Options include, but not limited to, Dual Lock Pin Grabber Couplers and Pin Lock Couplers. Redesigned General Purpose and Multi Purpose Loader Buckets increase digging performance and improve bucket durability for long term value.
Data not available.