The Cat® 420 XE Backhoe Loader delivers exceptional performance, increased fuel efficiency, superior hydraulic system, versatility and an updated operator station.
Net Power - SAE J1349 | 92 HP (68 kW) / 103 HP (76 kW) |
Dig Depth - Standard | — |
Operating Weight - Maximum | — |
Adjustable Seat Mounted Controls improve ergonomics by increasing operator comfort and legroom. Operators have Loader and Backhoe Controls in the palm of their hands, whether they are facing the Loader, the Backhoe, or sitting off set for better visibility. The new Spring Applied Hydraulically Released (SAHR) Parking Brake is controlled by simply pressing a button.
The Cat Backhoe Loader’s load sensing piston pump provides full hydraulic lifting and digging forces at any engine speed. Variable flow pump matches hydraulic power to work demands.
The Cat C3.6 engine delivers solid performance and meets U.S. EPA Tier 4 Final/EU Stage V emission standards by utilizing Selective Catalytic Reduction technology with a Diesel Oxidation Catalyst. The system allows the operator to disconnect the machine, even while the diesel exhaust fluid is being purged from the system.
Net Power - SAE J1349 | 92 HP (68 kW) / 103 HP (76 kW) |
Displacement | — |
Engine Model | C3.6 74.5 kW (100 hp) Electronic Turbo Intercooled |
Net Power Rating at 2,200 rpm - ISO 9249 | — |
Power Rating Conditions - No De-Rating Required Up To | — |
Net Torque Rise - 1,400 rpm - SAE J1349 | 47% |
Ratings at 2,200 rpm - Gross Power SAE J1995 | — |
Ratings at 2,200 rpm - Gross Power ISO 14396 | — |
Net Power Rating at 2,200 rpm - SAE J1349 | — |
Net Torque Rise - 1,400 rpm - SAE J1349 | — |
Emissions | Engine meets Tier 4 Final/Stage V emission standards. |
Net Peak Power - 1,800 rpm - ISO 9249 | — |
Dimensions - Bore | — |
Dimensions - Stroke | — |
Net Peak Power Rating @ 1,800 rpm - SAE J1349 | — |
Operating Weight - Maximum | — |
Cab - ROPS/FOPS | — |
Ride Control | — |
Air Conditioning | — |
Note | Machine configuration: standard stick hoe, OROPS canopy, AWD power shift transmission, 0.96 m³ (1.25 yd³) GP (General Purpose) loader bucket, 610 mm (24 in) standard duty hoe bucket, front 340/80-18 and rear 500/70-24 tires, 240 kg (530 lb) counterweight, 80 kg (176 lb) operator, full fuel tank. |
MP Bucket (0.96 m3/1.25 yd3) - With Fold-Over Forks | — |
Operating Weight - Maximum - ROPS Capacity | — |
MP Bucket (0.96 m3/1.25 yd3) - Without Fold-Over Forks | — |
Power-Shift Transmission | STD |
Extendible Stick (excludes ft. counterweight) | — |
Counterweights, base - Maximum | — |
Counterweights, base | — |
Loader QC | — |
All-Wheel Drive | STD |
Operating Weight (estimated) | — |
Counterweights, base - Stackable, one | — |
Dig Depth - Standard | — |
Power-Shift Transmission with LTC - Optional - Forward - 2nd | — |
Power-Shift Transmission with LTC - Optional - Forward - 6th LTC* | — |
Power-Shift Transmission with LTC - Optional - Forward - 5th LTC | — |
Power Shift Transmission - Standard - Forward - 3rd | — |
Power Shift Transmission - Standard - Reverse - 2nd | — |
Power-Shift Transmission with LTC - Optional - Reverse - 3rd | — |
Power-Shift Transmission - Optional - Forward - 2nd | — |
Power-Shift Transmission - Optional - Reverse - 1st | — |
Power-Shift Transmission with LTC - Optional - Forward - 4th | — |
Power Shift Transmission - Standard - Forward - 1st | — |
Power-Shift Transmission with LTC - Optional - Forward - 5th | — |
Power-Shift Transmission - Optional - Reverse - 2nd | — |
Power-Shift Transmission with LTC - Optional - Reverse - 1st | — |
Power-Shift Transmission with LTC - Optional - Forward - 1st | — |
Power-Shift Transmission - Optional - Reverse - 3rd | — |
Power Shift Transmission - Standard - Reverse - 1st | — |
Power-Shift Transmission - Optional - Forward - 3rd | — |
Power Shift Transmission - Standard - Reverse - 3rd | — |
Power-Shift Transmission with LTC - Optional - Forward - 6th | — |
Power Shift Transmission - Standard - Forward - 4th | — |
Power Shift Transmission - Standard - Forward - 2nd | — |
Power-Shift Transmission with LTC - Optional - Forward - 3rd | — |
Power-Shift Transmission with LTC - Optional - Reverse - 2nd | — |
Power-Shift Transmission - Optional - Forward - 6th | — |
Power-Shift Transmission - Optional - Forward - 4th | — |
Power-Shift Transmission - Optional - Forward - 5th | — |
Power-Shift Transmission - Optional - Forward -1st | — |
Note (2) | *Limited by engine speed to 40 km/h (25 mph). |
Note (1) | Travel speeds of two wheel drive backhoe loader at full throttle, when equipped with 500/70-24 rear tires. |
Rear Axle - Dynamic | — |
Front Axle, AWD - Dynamic | — |
Front Axle, AWD - Static | — |
Rear Axle - Static | — |
Pump Type | Variable-flow, Axial Piston |
System Pressure - Loader | — |
Pump Capacity at 2,200 rpm | — |
System Pressure - Backhoe | — |
Type | Closed Center |
Bore | — |
Turning Circle - (inner wheel not braked) - Outside Front Wheels | — |
Turning Circle - (inner wheel not braked) - Outside Widest Loader Bucket | — |
Power Steering | Hydrostatic |
Rod Diameter | — |
Type | Front Wheel Steering |
Stroke | — |
Axle Oscillation | 11° |
Cylinder | One Double-Acting |
Fuel Tank | — |
Engine Oil - With Filter | — |
Hydraulic Tank | — |
Hydraulic System | — |
Cooling System with Air Conditioning | — |
Rear Axle | — |
Diesel Exhaust Fluid (DEF) | — |
Rear Axle - Planetaries | — |
Transmission - Power Shift - AWD | — |
Transmission - Power Shuttle - AWD | — |
Front Axle (AWD) - Planetaries | — |
Front Axle (AWD) | — |
Adjustable Seat Mounted Controls improve ergonomics by increasing operator comfort and legroom. Operators have Loader and Backhoe Controls in the palm of their hands, whether they are facing the Loader, the Backhoe, or sitting off set for better visibility. The new Spring Applied Hydraulically Released (SAHR) Parking Brake is controlled by simply pressing a button.
The Cat Backhoe Loader’s load sensing piston pump provides full hydraulic lifting and digging forces at any engine speed. Variable flow pump matches hydraulic power to work demands.
The Cat C3.6 engine delivers solid performance and meets U.S. EPA Tier 4 Final/EU Stage V emission standards by utilizing Selective Catalytic Reduction technology with a Diesel Oxidation Catalyst. The system allows the operator to disconnect the machine, even while the diesel exhaust fluid is being purged from the system.
The all new Integrated Tool Carrier (IT Coupler) for Single Tilt Loader Arm configurations are available from the factory or for simple field installation. The Cat Backhoe Loader with Integrated Tool Carrier (IT Coupler) will be the most versatile machine on the job site providing quick connection to a variety of Cat Attachments.
A large portfolio of Backhoe Loader Attachments, including but not limited to, Quick Couplers, Thumbs, assorted Buckets, and Brooms are available from the factory or for field installation. Cat Backhoe Loaders will be “Dirt Ready” upon delivery.
A Four Speed Powershift Transmission is standard to make shifting gears smooth and as simple as twisting the Powershuttle Lever.
The redesigned boom cylinder increases lift performance by 15%.
Data not available.