TH306D Ag Handler TelehandlerNon-Current
TH306D Ag Handler - 2016, Tier 4 Final, NACD
Overview
TH306D Ag Handler - 2016, Tier 4 Final, NACD
Specifications
Units:
| Rated Load Capacity | — |
| Maximum Lift Height | — |
| Engine Model | TCD3.6 L4 |
Benefits & Features
Technology
- Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
- Optional Cat GRADE with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
- Optional Cat AccuGrade™ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
- Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.
Power Train
Designed for the livestock farmer, the Cat® TH306D features a powerful 74.4 kW (100 hp) engine coupled to a two speed hydrostatic transmission, allowing engine speed and forward speed to be independently controlled.
Performance
- Cat C13 ACERT™ engine meets U.S. EPA Tier 4 Final/EU Stage IV or Tier 3/Stage IIIA/Brazil MAR-1 equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
- Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
- Standard VHP Plus provides ideal amount of power in all gears.
- Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.
Specifications
Units:
| Engine Model | TCD3.6 L4 |
| Bore | — |
| Maximum Torque | — |
| Stroke | — |
| Emissions | Tier 4 Final/Stage IV or Tier 3/Stage IIIA/Brazil MAR-1 equivalent or Tier 2/Stage II equivalent |
| Gross Power | 74.4 kW (100 hp) |
| Note (2) | Optimized VHP Plus is standard for the 14M3. |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
| Displacement | — |
| Operating Weight - With Carriage and Forks* | — |
| Note | *Represents machine configuration of 74.4 kW (100 hp) engine on standard 405/70 T20 MPT01 tires. |
| Rated Load Capacity | — |
| Maximum Lift Height | — |
| Maximum Forward Reach | — |
| Capacity at Maximum Lift Height | — |
| Outside Turning Radius - Over Tires | — |
| Capacity at Maximum Forward Reach | — |
| Outside Turning Radius - Over Forks | — |
| Standard | Mitas 405/70 T20 MPT01 |
| Options | Michelin 400/70 R20 XMCL |
| Fuel Tank | — |
| Hydraulic Tank | — |
| Diesel Exhaust Fluid | — |
| Boom Up | — |
| Boom Down | — |
| Tele In | — |
| Tele Out | — |
| Crowd Backward | — |
| Combined - Down and In | — |
| Crowd Forward - Dump | — |
| Combined - Up and Out | — |
| Parking Brake | SAHR on front axle |
| Service Brakes | Boost assisted on front axle |
| Front Axle | Planetary reduction hubs with limited slip differential |
| Rear Axle | Open differential with planetary reduction hubs |
| Pump Type | Gear |
| System Type | Open Center |
| Auxiliary Hydraulic Flow - Boom Head - Intermittent | — |
| Maximum Pump Capacity | — |
| Auxiliary Hydraulic Pressure | — |
| System Pressure | — |
| Auxiliary Hydraulic Flow - Machine Rear | — |
| Auxiliary Hydraulic Flow - Boom Head - Continuous | — |
| Maximum Fork Dump Angle | 121° |
| Overall Height - Standard Tires* | — |
| Machine Length | — |
| Track | — |
| Cab Width | — |
| Overhang | — |
| Wheel Base | — |
| Ground Clearance | — |
| Overall Length to Front of Carriage | — |
| Overall Width - Standard Tires | — |
| Departure Angle | 66° |
| Maximum Fork Crowd Angle | 24° |
| Boom Breakout Force | — |
| Towable Mass - Hydraulically Braked | — |
| Noise Levels - In Cab | — |
| Quick Coupler Rotation | 145° |
| Bucket Breakout Force | — |
| Noise Levels - External | — |
| Drawbar Pull | — |
| Forward - 2 | 0 to 32 km/h (0 to 19.9 mph) |
| Reverse - 1 | 0 to 20 km/h (0 to 12.4 mph) |
| Reverse - 2 | 0 to 32 km/h (0 to 19.9 mph) |
| Forward - 1 | 0 to 20 km/h (0 to 12.4 mph) |
| Type | Hydrostatic with two speed on the move range change |
| Alternator Output | 12V/150A |
| Battery | 1 × 12V 1,000 CCA Battery |
Benefits & Features
Technology
- Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
- Optional Cat GRADE with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
- Optional Cat AccuGrade™ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
- Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.
Power Train
Designed for the livestock farmer, the Cat® TH306D features a powerful 74.4 kW (100 hp) engine coupled to a two speed hydrostatic transmission, allowing engine speed and forward speed to be independently controlled.
Performance
- Cat C13 ACERT™ engine meets U.S. EPA Tier 4 Final/EU Stage IV or Tier 3/Stage IIIA/Brazil MAR-1 equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
- Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
- Standard VHP Plus provides ideal amount of power in all gears.
- Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.
Frame, Boom and Linkage
Designed for durability. Easy to access greasing points mean a long, trouble free life for the machine. A Z-bar linkage delivers powerful breakout forces and fast cycle times.
Efficiency
- Load-sensing system and advanced electrohydraulics give operator superior implement control and hydraulic performance.
- Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.
- Balanced hydraulic flow is proportioned to ensure all implements will operate simultaneously without slowing engine or speed of some implements.
Powerful Hydraulics
Designed to operate hydraulically powered work tools such as straw spreaders and animal feeder buckets. Rear hydraulic services can also operate work tools as well as tipping trailers.
Ease of Operation
- Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.
- Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
- Selectable blade lift modes – Fine, Normal, or Coarse – allow operator to match application requirements.
- Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.
Cab
The cab is designed with the operator in mind with a multi function joystick and a comfortable working environment. The unique “Operator Preferences” feature allows the machine to be tuned to suit individual operators. Options include a heated air suspension seat, large display screen with pre-loaded load charts, rearview camera, reversing sensors and air conditioning.
Safety
- Optional rear vision camera enhances sight to rear of machine.
- Electrical disconnect and engine shutoff switches are ground level.
- Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
- Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.
- Optional seat belt indicator promotes safe operating habits.
Serviceability
- Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
- Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.
Data not available.
Standard Equipment
- Cab ROPS and FOPS
- Sunscreen
- Mechanical Suspension Seat with Seat Belt
- Roof Wiper
- Roof Guard
- Heater/De-mister
- Engine Speed Set
- Multi Function Joystick Controller with FNR
- Front and Rear Windscreen Wipers
- SAHR Parking Brake
- Electrical
- 1 × 12V 1,000 CCA Battery
- Reverse Alarm
- Other Equipment
- Boom Brushes
- Single Auxiliary Service to Boom Head
- Tires
- Mitas MPT01 405/70 T20
- Quick Couplers
- Manual Cat “IT” Interface
Optional Equipment
- Cab ROPS and FOPS
- Reversing Camera
- Reversing Sensors
- Large Electronic Display Screen
- Air Suspension Seat with Seat Belt
- Heated Air Suspension Seat with Seat Belt
- Screen Guard
- Air Conditioning
- Column Mounted FNR Lever
- Electrical
- Block Heater 110 Volt
- Work Lights, 4 × Cab Mounted (2 front, 2 rear) 2 × Boom Mounted
- Product Link™ Ready, Version 641
- Seven (7) Pin Trailer Service
- Rotating Beacon
- Other Equipment
- Ride Control with Boom Float
- 2nd Auxiliary Service to Boom Head
- Auxiliary Service to Rear
- Rear Hitch Mirror, Flat
- Rear Hitch Mirror, Convex
- Tool Box
- Tires
- Michelin 400/70 R20 XMCL
- Tow Hitches
- Retrieval Hitch
- Hydraulic Pick Up Hitch
- EEC Manual Hitch
- EEC Automatic Hitch
- EEC Automatic Hitch with Piton
- Trailer Braking Valve
- Quick Couplers
- Hydraulic Cat “IT” Interface
- Work Tools
- Floating Fork Carriage
- ISO Class 3 Fixed Fork Carriage
- Side Shift Carriage
- 1 m3 (1.3 yd3) General Purpose Bucket
- 1.5 m3 (1.95 yd3) Rehandling Bucket
- 1.0 m3 (1.3 yd3) Multi Purpose Bucket
- 2.0 m3 (2.6 yd3) Grain Bucket
- Grapple Bucket
- Muck Fork and Grapple
- Bale Handler
- Sweeper Collector