TL642D with Stabilizers^Non-Current

Engine

Engine Model	Cat® C3.4B
Gross Power - Basic	—100 HP75 kW
Note	Meets U.S. EPA Tier 4 Final emission standards.

Weights

Operating Weight

—22928 lb10400 kg

Operating Specifications

Rated Load Capacity	—6500 lb2948 kg
Maximum Lift Height	—42 ft12.8 m
Maximum Forward Reach	—30 ft9.1 m
Top Travel Speed	—20 mile/h32 km/h
Capacity at Maximum Height (o/r Up)	—6000 lb2722 kg
Capacity at Maximum Reach (o/r Down)	—1700 lb771 kg
Capacity at Maximum Reach (o/r Up)	—600 lb272 kg
Capacity at Maximum Height (o/r Down)	—6500 lb2949 kg
Turning Radius - Over Tires	—12 ft3.7 m
Drawbar Pull - Loaded	—19783 lbf88 kN
Frame Leveling	10°

Tires

Standard	370/75-28 Air Duraforce
Optional (1)	370/75-28 Foam Duraforce
Optional (4)	13.00 × 24 Solid
Optional (3)	13.00 × 24-12 PR Foam Filled
Optional (2)	13.00 × 24-16 PR Air

Hydraulic System

Gear Pump	Single-section
Note	Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure	—3770 psi260 bar
Auxiliary Hydraulic Pressure	—3481 psi240 bar
Auxiliary Hydraulic Flow	—18 gal/min68 l/min

Service Refill Capacities

Fuel Tank	—38.3 gal (US)145 B
Diesel Exhaust Fluid (DEF) Tank	—5.7 gal (US)21.5 B
Hydraulic System	—42 gal (US)158 B

Boom Performance

Boom Up	—15.5 s15.5 s
Boom Down	—10.7 s10.7 s
Tele In	—11.8 s11.8 s
Tele Out	—17 s17 s

Braking System

Parking Brakes	Wet disc, spring applied hydraulic release on front axle
Service Brakes	Inboard wet disc brakes on front and rear axles

Axles

Type (1)	Trunnion mounted planetary 55 degree steer axles
Type (2)	High bias limited slip differential on front axle

Work Tools

Carriages - Standard Rotate	—50 in1270 mm
Pallet Forks - Option 3	[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Pallet Forks - Option 1	[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Carriages - Wide Tilt	—72 in1829 mm
Cubing Forks	[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Swing	100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Standard Tilt	—50 in1270 mm
Pallet Forks - Option 2	[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Carriages - Dual Fork Positioning	—50 in1270 mm
Carriages - Side Shift	—48 in1220 mm
Carriages - Wide Rotate	—72 in1829 mm
Lumber Forks - Option 2	[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Hydraulic IT Coupler	Includes Auxiliary Electrics
Lumber Forks - Option 1	[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)

Transmission Speeds

Forward	4 speed
Reverse	3 speed