TL642DNon-Current
TL642D - 2015, Tier 4 Final/Stage IV, GN2, NACD
Overview
The TL642D is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.
Specifications
| Rated Load Capacity | — |
| Maximum Lift Height | — |
| Engine Model | Cat® C3.4B |
Specifications
| Engine Model | Cat® C3.4B |
| Gross Power - Basic | — |
| Note | Meets U.S. EPA Tier 4 Final emission standards. |
| Operating Weight | — |
| Rated Load Capacity | — |
| Maximum Lift Height | — |
| Maximum Forward Reach | — |
| Top Travel Speed | — |
| Capacity at Maximum Reach | — |
| Frame Leveling | 10° |
| Drawbar Pull - Loaded | — |
| Capacity at Maximum Height | — |
| Turning Radius - Over Tires | — |
| Standard | 370/75-28 Air Duraforce |
| Optional (1) | 370/75-28 Foam Duraforce |
| Optional (2) | 13.00 × 24-16 PR Air |
| Optional (3) | 13.00 × 24-12 PR Foam Filled |
| Optional (4) | 13.00 × 24 Solid |
| Gear Pump | Single-section |
| Note | Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. |
| System Operating Pressure | — |
| Auxiliary Hydraulic Pressure | — |
| Auxiliary Hydraulic Flow | — |
| Fuel Tank | — |
| Diesel Exhaust Fluid (DEF) Tank | — |
| Hydraulic System | — |
| Boom Up | — |
| Boom Down | — |
| Tele In | — |
| Tele Out | — |
| Parking Brakes | Wet disc, spring applied hydraulic release on front axle |
| Service Brakes | Inboard wet disc brakes on front and rear axles |
| Type (1) | Trunnion mounted planetary 55 degree steer axles. |
| Type (2) | High bias limited slip differential on front axle. |
| Hydraulic IT Coupler | Includes Auxiliary Electrics |
| Carriages - Swing | 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) |
| Pallet Forks - Option 2 | [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) |
| Carriages - Standard Tilt | — |
| Carriages - Dual Fork Positioning | — |
| Carriages - Standard Rotate | — |
| Cubing Forks | [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) |
| Carriages - Side Shift | — |
| Carriages - Wide Rotate | — |
| Lumber Forks - Option 1 | [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) |
| Carriages - Wide Tilt | — |
| Lumber Forks - Option 2 | [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in) |
| Pallet Forks - Option 1 | [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) |
| Pallet Forks - Option 3 | [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in) |
| Forward | 4 speed |
| Reverse | 3 speed |
Benefits & Features
Data not available.
Related Products
Detect
On the surface, operators in the cabs of large mining equipment often cannot see if another machine or vehicle is too close for safe operation. Detect helps alleviate this potential safety hazard and can also be configured to provide valuable information about site conditions and other assets working in the area. Underground, continuous equipment movement on a longwall face can pose risks to those in the working area.
Equipment Management
Cat® Equipment Management gives you access to the data you need to keep your equipment on the job site and earning money. You can track equipment location and hours, monitor machine use and health, then take informed action that will keep your operation running smoothly, efficiently and profitably.
| Model |
|---|
| Cat App |
| My.Cat.Com |