TL943D with Stabilizers^Non-Current

Engine

Engine Model	Cat® C3.4B
Gross Power - Basic	—111 HP83 kW
Note	Meets U.S. EPA Tier 4 Final emission standards.

Weights

Operating Weight

—26852 lb12180 kg

Operating Specifications

Rated Load Capacity	—9000 lb4082 kg
Maximum Lift Height	—43 ft13.1 m
Top Travel Speed	—19 mile/h29.9 km/h
Capacity at Maximum Height (o/r Down)	—7000 lb3175 kg
Capacity at Maximum Height (o/r Up)	—7000 lb3175 kg
Capacity at Maximum Reach (o/r Down)	—2700 lb1225 kg
Capacity at Maximum Reach (o/r Up)	—1100 lb499 kg
Turning Radius - Over Tires	—12 ft3.7 m
Drawbar Pull - Loaded	—21582 lbf96 kN
Frame Leveling	10°

Tires

Standard	370/75-28 Duraforce MT
Optional (1)	370/75-28 Foam Duraforce
Optional (2)	13.00 × 24 Solid
Optional (3)	14 × 24-16 PR Air
Optional (4)	14 × 24-12 PR Foam

Service Refill Capacities

Fuel Tank	—38 gal (US)145 B
Diesel Exhaust Fluid (DEF) Tank	—5.7 gal (US)21.5 B
Hydraulic System	—49 gal (US)184 B

Boom Performance

Boom Up	—9.9 s9.9 s
Boom Down	—8.5 s8.5 s
Tele In	—14.6 s14.6 s
Tele Out	—14.5 s14.5 s

Braking System

Service Brakes	Inboard wet disc brakes on front and rear axles
Parking Brakes	Wet disc, spring applied hydraulic release on front axle

Axles

Types (1)	Trunnion mounted planetary 55 degree steer axles.
Types (2)	High bias limited slip differential on front axle.

Hydraulic System

Pump Type	Variable displacement load sensing axial piston pump
Auxiliary Hydraulic Pressure	—3481 psi240 bar
System Operating Pressure	—3770 psi260 bar
Note	Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
Auxiliary Hydraulic Flow	—25 gal/min95 l/min

Work Tools

Lumber Forks - Option 1	[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Carriages - Side Shift	—48 in1220 mm
Lumber Forks - Option 2	[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Cubing Forks	[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Swing	100°, 1829 mm, 4028 kg Capacity, 2268 kg Swung (100°, 72 in, 9,000 lb Capacity, 5,000 lb Swung)
Pallet Forks - Option 2	[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Hydraulic IT Coupler	Includes Auxiliary Electrics
Carriages - Wide Rotate	—72 in1829 mm
Carriages - Dual Fork Positioning	—50 in1270 mm
Carriages - Standard Tilt	—50 in1270 mm
Carriages - Standard Rotate	—50 in1270 mm
Carriages - Wide Tilt	—72 in1829 mm
Pallet Forks - Option 3	[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Pallet Forks - Option 1	[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)

Transmission Speeds

Reverse	3 speed
Forward	4 speed