926M Waste HandlerNon-Current
926M Waste - 2016, Tier 4 Final, Stage IV, NACD,EU,AUZ
Overview
The Cat® 926M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.
Specifications
Units:
| Maximum Gross Power | — |
| Operating Weight | — |
| Bucket Capacities | 3.0-5.0 m³ (3.9-6.5 yd³) |
Benefits & Features
Specifications
Units:
| Maximum Gross Power | — |
| Bore | — |
| Stroke | — |
| Displacement | — |
| Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | — |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | — |
| Emissions | The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards. |
| Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | — |
| Note (2) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | — |
| Note (1) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
| Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) | — |
| Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | — |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | — |
| Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) | — |
| Engine Model | Cat® C7.1 |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) | — |
| Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) | — |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | — |
| Engine Power - ISO 14396 | — |
| Engine Power - ISO 14396 - Metric | — |
| Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) | — |
| Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | — |
| Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | — |
| Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | — |
| Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) | — |
| Net Power (Performance Power Mode: Range 1-4) | — |
| Net Power (Standard Power Mode: Range 1-3*) | — |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | — |
| Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | — |
| Bucket Capacities | 3.0-5.0 m³ (3.9-6.5 yd³) |
| Note (2) | ~Dimensions listed are for a machine configured with heavy counterweights, waste guarding, 80 kg (176 lb) operator, and new solid tires. |
| Full Turn Tip Load (1) | 7461 kg (16,448 lb)** |
| Note (1) | **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires. |
| Full Turn Tip Load (2) | 8491 kg (18,719 lb)~ |
| Operating Weight | — |
| Operating Weight (1) | 13 913 kg (30,672 lb)** |
| Note (2) | ~Dimensions listed are for a machine configured with heavy counterweights, waste guarding, 80 kg (176 lb) operator, and new solid tires. |
| Note (1) | **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires. |
| Operating Weight (2) | 15 695 kg (34,600 lb)~ |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 LEVEL II |
| Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* | — |
| Note (1) | * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.<br>– The Blue Angel environmental label is an optional attachment for Europe only. |
| Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* | — |
| Air Conditioning | The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
| Note (3) | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped. |
| Maximum Working Pressure - Implement Pump | — |
| Note (1) | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) | 5.5/6.2 seconds |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) | 2.6/2.6 seconds |
| Maximum Flow - Implement Pump | — |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time | 9.6/10.5 seconds |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | — |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) | 1.5/1.7 seconds |
| Relief Pressure - Tilt Cylinder | — |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | — |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | — |
| Lift Cylinder: Standard Lift Linkage - Rod Diameter | — |
| Tilt Cylinder: Standard Lift Linkage - Rod Diameter | — |
| Tilt Cylinder: Standard Lift Linkage - Bore Diameter | — |
| Lift Cylinder: Standard Lift Linkage - Bore Diameter | — |
| Tilt Cylinder: Standard Lift Linkage - Stroke | — |
| Lift Cylinder: Standard Lift Linkage - Stroke | — |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | — |
| Maximum Flow - Steering Pump | — |
| Steering Cylinder, Double Acting - Bore Diameter | — |
| Maximum Steering Torque - 40° (Full Turn) | — |
| Maximum Steering Torque - 0° (Straight Machine) | — |
| Maximum Working Pressure - Steering Pump | — |
| Note (1) | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. |
| Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | — |
| Steering Cylinder, Double Acting - Rod Diameter | — |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
| Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | — |
| Steering Cylinder, Double Acting - Stroke | — |
| Forward and Reverse - Range 4 | — |
| Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) |
| Forward and Reverse - Range 2 | — |
| Note | *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph). |
| Forward and Reverse - Range 3 | — |
| Front Axle - Traction Aid | Locking differential |
| Rear Axle - Oscillation Angle by Tire Size - 17.5 R25 | ± 13.5 degrees |
| Note (1) | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. |
| Brakes - Service | Inboard wet disc |
| Brakes - Parking | Spring applied hydraulically released |
| Note (3) | Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M. |
| Front Axle | Fixed |
| Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 | ± 10.5 degrees |
| Rear Axle - Traction Aid - Optional | Limited slip differential |
| Rear Axle | Oscillating |
| Note (2) | Offset rims available to meet European roading requirements. |
| Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder | ± 7 degrees |
| Hydraulic Tank | — |
| Fuel Tank | — |
| Engine Crankcase | — |
| Axles - Rear | — |
| Axles - Front | — |
| Cooling System | — |
| Hydraulic System - Including Tank | — |
| Diesel Exhaust Fluid (DEF) Tank | — |
| Transmission - Gear Box | — |
Benefits & Features
Application Specific Configuration
Guard Your Investment
Choose from a complete range of optional guarding to protect your machine from the harsh environment of a waste handling application. The machine guarding is purpose built to protect the machine's major components and systems to keep you on the job and maximize production rates.
Breathe Clean
Maximize your engine life and extend filter cleaning intervals with a turbine pre-cleaner. Keep cool with a reversing fan to purge the single plane, widely spaced core cooling package and brush-less sealed alternator. Breath clean with a powered RESPA system for the operator environment designed to eliminate 90% of the particulate in the air and filter the remaining 10%.
Maximize Tire Life
Fine tune your wheel torque to match the underfoot conditions and maximize performance while extending tire life. Cat Waste Handlers feature wheel torque adjustments through an exclusive Rimpull Control feature designed to keep your operating costs low.
Customize Your Experience
Work as one with your machine by customizing the controls.
Flexible Power Train
- A smooth, step-less electronically controlled hydrostatic transmission provides adjustable power to the ground with excellent groundspeed control and customizable feel.
- Select your Power Train Mode:
- Torque Converter (TC) for smooth rollout.
- Hystat for aggressive engine braking.
- Default mode which blends the best of Hystat and Torque Converter characteristics.
- Reduce tire wear using Rimpull control which enables you to match available tractive power to underfoot conditions
- Set Directional Shift Response, soft and smooth for material handling applications or sharp for aggressive operation.
Adjustable Electro Hydraulic Controls
- Easily customize the hydraulic performance through touch screen display to optimize your efficiency.
- Optimize hydraulic modulation with Fine Mode control when working with forks.
- Quicker Hydraulic response for fine grading at speed and quick functions through Lift and Tilt response settings.
- Fully adjustable ride control activation speed along with 3rd function auxiliary flow for powering a roll out bucket.
Operator Profiles and Coded Start
- The M Series Wheel Loaders will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure on the job site.
Efficiently Powerful
Power on Demand
A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed to get your work done even quicker.
Standard Power Mode
- Saves up to 10% fuel compared to previous K Series models while running at an efficient 1,600 rpm.
- Recommended for load and carry to maximize fuel efficiency.
- Power-by-range logic increases power in speed Range 4 automatically to maximize travel speed and grade climbing performance.
- Reduces cab sound levels down to a whisper quiet 64 dB(A) typical.
Performance Power Mode
- Enabled at the push of a button (HP+).
- Boosts engine power by up to 10% in all speed ranges.
- Boosts engine speed by over 12%.
- Increases hydraulic cycle times and productivity.
Six Cylinders of Efficient Power
- The Cat C7.1 engine provides more efficient, quieter operation while delivering superior performance and durability through a high torque, low speed design, with a Clean Emissions Module that is designed to manage itself so you can concentrate on your work.
- No downtime for regeneration with a passive low temperature system that keeps you on the job.
- Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
- Extended fluid fill intervals with minimal use of Diesel Exhaust Fluid (DEF) with up to four fuel tank fills per DEF fill.
- Configurable auto idle shut down based on time and ambient temperature to further reduce fuel burn and keep operating costs low.
Power to the Ground
Lock up and go with fully locking front differential axles that can be engaged on the move at full torque with the pull of a trigger on the seat mounted joystick. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.
Independent service brakes on front and rear axles provide robust stopping performance while a push button electronic park brake allows you to safely secure the machine with ease.
Work Made Easy
Optimized Z-bar Linkage
- The Caterpillar patented optimized Z-bar linkage combines the digging efficiency of a traditional Z-bar with integrated tool carrier capabilities for great performance and versatility.
- Perfect Parallelism functionality available in Fork Mode gives truly predictable performance while high tilt forces throughout the working range help you safely and confidently handle loads with precise control.
- Forward Visibility has been maximized with the introduction of Gen III lift arms which bring a cast torque tube resulting in class leading front visibility when combined with the new cast couplers.*
- Enhanced coupler options, new ISO or Fusion™ Cast Couplers offers additional visibility when compared with previous plate style couplers.
Quick Loading, Performance Series Buckets
Performance Series Buckets deliver up to 10% higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a longer floor to take a bigger bite of the pile, an open throat to heap higher and curved side bars to help with material retention. This optimized shape is echoed across the General Purpose, Light Material, and High Dump bucket families.
Smooth and Predictable Multi-Function Performance
- M Series machines feature an electro-hydraulic control system that is governed by the Intelligent Power Management system for peak efficiency. The load-sensing, variable flow system senses work demand and adjusts flow and pressure to match the operators request.
- Multi-Function without compromise through Caterpillar's exclusive dedicated hydraulic systems featuring three pumps:
- 1st pump for Intelligent Hydrostatic drive
- 2nd pump for implements
- 3rd pump for steering system
- Programmable in-cab kick-outs are easy to set on the go for tilt, lower and lift. This feature is ideal for applications where the work cycle is repeatable allowing you to quickly return to programed set points such as ground and level.
- Fine tune hydro-mechanical performance with fully adjustable 3rd function flow through the touch screen display (when equipped) for a perfect marriage between machine and attachments.
Enjoy All Day Comfort
Have a Seat and Experience:
- Seat-mounted controls featuring a low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.
- Superior all around visibility with single piece front windshield, new parabolic external mirrors, redesigned Generation III linkage and clean hydraulic lines routing.
- Automatic climate control with heated rear glass and external mirrors for a quick defrost.
- Fully adjustable controls including steering column, joystick and seat suspension.
- Information at a glance with large primary LCD display and 178 mm (7 in) color touch screen display.
- An extra eye on the job site with standard rear view camera, optional integrated rear object detection and optional* forward facing camera system.
- A heated and cooled seat option for added comfort in a wide range of climates.
An easy day at work with:
- A spacious, safe, quiet operator environment featuring ergonomic controls, seat belt notification and optional Bluetooth® radio with integrated microphone and multiple USB charging ports and AUX audio connectors.
- Easy access to vital machine parameters with the optional* touch screen display that works in conjunction with the standard soft touch panel to allow real time adjustments to machine features and an integrated help button with over 25 languages.
- Comfortable soft stops at cylinder end stroke conditions and programmable kickout points with the Caterpillar advanced electro-hydraulic cylinder snubbing.
- An even smoother ride with optional Ride Control when working unloaded and loaded with excellent material retention.
- Early starts and late finishes are made easier with optional LED lighting package that includes engine and DEF compartment lighting to illuminate the way for checking oil, and coolant level along with refueling the machine in dark conditions.
- On board operator coaching via help button on the optional* secondary display.
Configured for Success
The Way You Want It
A complete range of optional equipment and work tools gives you the versatility to configure a Waste Handler to be successful in your business. Get with your Caterpillar dealer to configure yours.
Guards:
- Windshield
- Tilt cylinder
- Lights
- Fender deflectors
- Drive shaft
- Hitch
- Steering cylinders
- Side power train
- Lower power train
- Crank case
Debris Packages:
- Reversing fan
- Sealed alternator
- Turbine precleaner
- RESPA precleaner
Work Tools:
- Full range of tools
Operator Environment:
- Seat, deluxe or premium
- Deluxe cab (with touch screen display)
Other Options:
- Autolube
- High lift linkage
- Coupler: Fusion™ and ISO 23727
- Auxiliary hydraulics: 3rd and 4th
- Window washing access
- Ride control
- Fenders: extended and full coverage
- Counterweights
- Cold start package
- Rear object detection
- Blue Angel certification
- Beacon
- LED auxiliary lights
- CPM – Cat Production Measurement
- TPM – Tire Pressure Monitoring
Serviceability
- Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:
- Product Link™ PRO standard with a trial subscription to VisionLink®.
- Maintenance reminders through touch screen display at scheduled intervals.
- Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
- Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
- Jump start studs as standard equipment.
- Extended cleanouts with single plane cooling system and wide spaced six fins per inch coolers as standard.
- Integrated Autolube (optional) with adjustable greasing frequency.
Customer Support
Renowned Cat Dealer Support
Rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.
Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.
Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.
Data not available.
Standard Equipment
- POWER TRAIN
- Axle Duo-Cone™ seal guards
- Auto idle shut down feature
- Cat C7.1 engine<br>– Power modes (Standard and Performance)<br>– Power by range (High Power in Range 4)<br>– Turbocharged and aftercooled<br>– Diesel particulate filter (Fit for Life)
- Coded start (requires secondary display)
- Differential lock in front axle
- Enclosed wet disc full hydraulic brakes
- Hydraulically driven demand cooling fan
- Hydrostatic transmission with electronic control<br>– Operator modes (Default, TC, Hystat, and Ice)<br>– Directional Shift Aggressiveness (fast, medium, slow)<br>– Rimpull control, adjust wheel torque<br>– Creeper control, adjust ground speed
- Parking brake, electric
- Single plane cooling package wide six fins per inch density
- Oil sampling ports
- Throttle lock and max speed limiter
- HYDRAULICS
- Automatic lift lower and tilt kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Load sensing hydraulics and steering
- Seat-mounted hydraulic joystick controls
- ELECTRICAL
- Alternator, 115 amp, heavy duty
- Batteries, 1,000 CCA (2) 24V system, disconnect switch
- Back-up alarm
- Emergency shutdown switch
- Halogen work and roading lights, LED rear tail lights
- Product Link PRO with three year subscription
- Remote jump start post
- Resettable main and critical function breakers
- OPERATOR ENVIRONMENT
- 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
- Automatic temperature control
- Cab, pressurized
- Camera, rearview
- External heated mirrors with lower parabolic
- Ground level cab door release
- Hydraulic control lockout
- Mirror, single
- Lunch box storage
- Radio ready speakers
- Rear window defrost, electric
- Column mounted multi function control – lights, wipers, turn signal
- Tilt and telescopic steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
- Suspension seat, fabric
- OTHER STANDARD EQUIPMENT
- Large-access enclosure doors with adjustable close/open force
- Cat optimized Z-bar linkage with parallel lift
- Recovery hitch, with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures
Optional Equipment
- OPTIONAL EQUIPMENT
- Autolube, integrated in secondary display
- Auxiliary flow, third and fourth function
- Differential, limited slip, rear
- Beacon light, strobe
- Cab, deluxe (standard in Europe)<br>– Camera, rearview integrated into advanced display<br>– Electrically adjustable external heated mirrors (2)<br>– Secondary display to enable features and adjust parameters<br>– LED interior lighting<br>– Sunscreen, front and rear<br>– Touchscreen secondary display<br>– Ride control adjustable speed activation<br>– Preventative maintenance reminders<br>– Integrated help function (26 languages)
- Camera, roof mounted, front view with separate display
- Cold start package<br>– Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
- Counterweight, additional options
- Coupler, (Fusion and ISO 23727)
- Debris packages (low, medium, high)
- Fenders (extended cover and full coverage)
- Guarding packages
- Linkage, high lift
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Payload Technology<br>– Cat Production Measurement (CPM)<br>– CPM Printer
- Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
- Radio packages
- Rear Object Detection
- Ride Control System, adjustable through secondary display
- Seats<br>– Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest<br>– Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
- Steering<br>– Dual mode and secondary
- Tire Pressure Monitoring (TPM)
Related Products
Units:
Angle Brooms
Used for clearing parking lots, industrial plants, mill yards, airport runways, streets, driveways and lanes.
| Model | Overall Width | ||
|---|---|---|---|
| BA30 Hydraulic | — | — | — |
| BA30 Manual | — | — | — |
Construction Forks
For use in heavy duty applications.
| Model | Height | ||
|---|---|---|---|
| 1524 mm (60 in) | — | — | — |
| 1829 mm (72 in) | — | — | — |
Light Material Buckets
Used for loading light, loosely-packed materials.
| Model | Width | ||
|---|---|---|---|
| 5.0 m3 (6.5 yd3), Pin On | — | — | — |
| 4.2 m3 (5.5 yd3), Pin On | — | — | — |
| 3.5 m3 (4.6 yd3), Pin On | — | — | — |
| 3.0 m3 (3.9 yd3), Fusion™ Coupler | — | — | — |
| 3.8 m3 (5.0 yd3), Pin On | — | — | — |
| 3.8 m3 (5.0 yd3), Fusion™ Coupler | — | — | — |
| 3.8 m3 (5.0 yd3), Pin On | — | — | — |
| 3.5 m3 (4.6 yd3), ISO Coupler | — | — | — |
| 4.2 m3 (5.5 yd3), ISO Coupler | — | — | — |
| 5.0 m3 (6.5 yd3), ISO Coupler | — | — | — |
| 3.5 m3 (4.6 yd3), Fusion™ Coupler | — | — | — |
| 4.2 m3 (5.5 yd3), Fusion™ Coupler | — | — | — |
| 5.0 m3 (6.5 yd3), Fusion™ Coupler | — | — | — |
| 3.0 m3 (3.9 yd3), Pin On | — | — | — |
| 3.5 m3 (4.6 yd3), Pin On | — | — | — |
| 4.2 m3 (5.5 yd3), Pin On | — | — | — |
| 5.0 m3 (6.5 yd3), Pin On | — | — | — |