Overview
A natural extension of the rugged Caterpillar product line, the CT660 is built for unparalleled driver satisfaction, maximum payloads, unprecedented uptime and low cost of ownership in dozens of applications.
Specifications
| Engine Model | Cat® CT13 Engine |
| Horse Power at 1700 rpm | 365 - 475 hp (268 - 349 kW) |
| Maximum Gross Input Power | — |
Benefits & Features
Cab Construction
Aluminum alloy cab construction reduces overall weight for maximum payloads
Body Design
Sloped hood increases visibility and decreases wind drag for improved fuel efficiency.
Modular Design
Modular design allows for quick, cost-effective replacement of damaged components.
Specifications
| Engine Model | Cat® CT13 Engine |
| Horse Power at 1700 rpm | 365 - 475 hp (268 - 349 kW) |
| Bore | — |
| Engine Type | Diesel, 4-Cycle |
| Configuration | Inline 6-Cylinder |
| Stroke | — |
| Displacement | — |
| Compression Ratio | 17:1 |
| Aspiration | Dual Series Turbochargers, Intercooler and Aftercooler |
| Combustion System | Direct Injection |
| Lubrication System Capacity | — |
| Coolant Drain Interval | 600,000 miles (965,606 km) |
| Total Engine Weight - Dry | — |
| Width | — |
| Length | — |
| Height | — |
| Valves | 4 Valves Per Cylinder, Overhead Cam Actuated |
| Peak Torque - 1000 rpm | 1250 - 1700 lb-ft (1695 - 2305 Nm) |
| Maximum Gross Input Power | — |
| Maximum Gross Input Torque | — |
| Transmission Model | Cat CX31® Automatic Transmission |
| Speeds | 6 forward/1 reverse |
| Torque Converter | Cast aluminum design with lock up clutch |
| Clutches | Electro-hydraulic fully modulated, oil cooled, multidisc |
| Maximum Input Speed | 2500 rpm |
| Length | — |
| Overall Weight - With Retarder Option | — |
| Side - PTO Capacity (Rotation Same as Engine, Ratio Determined by PTO Adaptor) | — |
| Overall Weight - Approximate | — |
| Rear - PTO Capacity (Rotation Opposite of Engine, at 1.25 Engine Speed) | — |
| Overall Length - With Retarder Option | — |
| Power Take-Off | Two side locations and a Cat exclusive high output rear PTO |
Benefits & Features
Cab Construction
Aluminum alloy cab construction reduces overall weight for maximum payloads
Body Design
Sloped hood increases visibility and decreases wind drag for improved fuel efficiency.
Modular Design
Modular design allows for quick, cost-effective replacement of damaged components.
Control Panel
The CT660's ergonomically designed dashboard and center stack layout give drivers complete command and control. All controls, levers, switches and gauges are positioned to maximize safety and minimize fatigue, so drivers can stay focused on the job at hand.
Operator Comfort
The CT660 cab is designed for comfort and functionality with its spacious wide cab design. Ergonomic details reduce driver fatigue and interior features enhance driver and jobsite safety and productivity.
Less vibration and noise
Premium design and materials dramatically reduce vibration and cab noise.
Vocational Applications
Aggregates, Agriculture, Asphalt, Concrete, Civil Construction, Forestry, Governmental, Heavy Haul, Landscaping, Lease/Rental, Manufacturing, Mining/Quarry, Oil & Gas, Paving, Pipeline, Public Services, Recovery, Road Construction, Sanitation/Refuse, Site Construction, Transportation, Utility, Wholesale & Retail
CAT® CT13 Engine
Under the hood, the CT660 is powered by a Cat CT Series Vocational Truck Engine with ratings specific to vocational truck applications and a horsepower/torque combination to tackle the toughest jobs.
CAT CX31® Automatic Transmission
Used for years in vocational applications around the world, the Cat CX31 Automatic Transmission has a proven track record for quality and reliability that helps maximize uptime. And Cat dealers know the CX31 inside and out because they've been supporting it in various on-highway applications since 2006.
Data not available.
Standard Equipment
- Chassis
- Set-Back Axle (SBA), 116-inch and 122-inch Bumper to Back of Cab (BBC)
- Industry Leading Turning Radius
- Durable, heat-treated alloy steel frame rails
- 12.0-inch rail size: 110,000 and 120,000 psi yield strength
- Length variable in 2.0-inch increments
- Available with rail reinforcements: one or two frame reinforcements available
- Superior routing and clipping of all hoses and wires
- Axles
- Meritor, Dana and Fabco options available
- Front Suspension
- Multileaf, shackle type, single or two-stage spring
- Multileaf, slipper type
- Compatible shock absorber selection
- Rear Suspension
- Hendrickson suspension offerings: HaulMaax, HN, RT/RTE, RS, R, PriMaax
- Chalmers high articulation
- Fuel Tanks
- Fuel tanks available in 60, 80, 100 and 120 gallon capacities
- Single left, single right or dual fuel tanks
- Aluminum alloy construction
Optional Equipment
- Transmissions
- Cat CX31 Automatic Transmission
- Manual and UltraShift Plus Vocational transmissions built by Eaton are also available as options on the CT660