There are few roof support carriers rated at 40 tonnes (44 tons) capacity. Only one carries this load at these speeds while maintaining flexibility and a small roadway presence. The SH640 D is a compact yet powerful roof support carrier that negotiates tight bends as well as steep gradients and uneven floor conditions. The compact Cat SH640 D diesel roof support carrier was developed to suit cramped mine conditions. It carries a massive 40 tonnes (44 tons) on standard forks. The design focuses on haulage of longwall roof supports and heavier ancillary components of the longwall.
Carry Capacity | — |
Vehicle Length | — |
Vehicle Width | — |
Carry Capacity | — |
Vehicle Length | — |
Vehicle Width | — |
Power Rated At | — |
Turn Radius - Outside | — |
Steering Articulation | — |
Maximum Speed with Load | — |
Ground Clearance | — |
Pull Winch Rated At | 20 tonnes (22 tons)/30 tonnes (33 tons) |
Torque - Tractive Effort | — |
Motor/Engine | Diesel |
Frame Oscillation | — |
Wheel Base | — |
Maximum Speed | — |
Gradients Possible (Gradient Data Short-Term Only) | 14.5° continuous |
Steering | Steering wheel |
Capacity - Tow Hitch | — |
Maximum Un-braked Trailer Mass | — |
Tractive Effort - Maximum | — |
Lift SAE @ 600 mm (23.6 in) from Fork Face | — |
Winch - Front | — |
Unladen with Full Tanks | — |
Maximum Laden | — |
Maximum Power Gross | 171.5 kW (230 hp) @ 2,200 rpm |
Displacement | — |
Cooling Fan | Hydraulic Driven Fan |
Radiator Position | Vertical Rear |
Engine Make/Model | Cat® C7 |
Maximum Torque Tested | 895 N·m (660 lb-ft) @ 1,700 rpm |
Type | Diesel, Turbocharged |
Cooling System | Coolant Based Radiator |
Low Idle | — |
High Idle | — |
Average Mine Duty | 20-40 L/hr (5.3-10.5 gal/hr) |
At Full Power | — |
Type | Flameproof Wet |
Exhaust Flame Trap | Replaceable China and RSA |
Exhaust Filter | Replaceable Element except China |
Aftertreatment | Catalytic Exhaust Purifier |
Make | Caterpillar |
Speeds - Forward and Reverse | 4 |
Type | Integral |
Rear Axle | Heavy Duty Trunnion Mount |
Front Axle | Heavy Duty Fixed |
Wheel Chains | Optional |
Size | 1371 mm O/D × 559 mm Wide (55 in O/D × 22 in Wide) |
Inflation Media | Solid |
Laden Rear | — |
Unladen Front | — |
Laden Front | — |
Unladen Rear | — |
Application | Spring Applied, Hydraulic Released |
Type | Totally Enclosed, Wet Type |
Type | Totally Enclosed, Wet Type |
Application | Spring Applied, Hydraulic Released |
Degrees of Turn Either Side | 45 degree |
Degrees Up and Down from Horizontal | 6 degree |
Type Protective Device | MDG1 |
ROPS/FOPS | Optional |
Voltage | — |
Type | Approved Flameproof |
System Type | Cat DCS Electronic, Intrinsically Safe Approved |
Number/Location | STD 2 Front, 2 Rear |
Engine Cooling System Water | — |
Axle Oil - Each | — |
Transmission - Converter Oil | — |
Fuel Tank | — |
Main Air Receiver | — |
Drop Box Oil | — |
Hydraulic Tank | — |
Engine Crankcase Oil | — |
Water Make Up Tank | — |
3rd Gear | — |
2nd Gear | — |
4th Gear | — |
1st Gear | — |
Front to Rear | 1:4 |
Side to Side (Laden) | 1:8 |
Side to Side (Empty) | 1:4 |
Diesel-powered roof support carriers carry your roof supports the full distance at maximum speed and lowest cost. Diesel equipment is a good option for new longwall installations as they do not require electrical infrastructure such as cabling and charging stations and can operate at higher speeds over long distances, up steeper gradients and over rougher terrain - conditions not suitable for battery-powered vehicles.
There are many technical features of Cat diesel vehicles that make them unique in the underground mining industry. Their general body air emissions are one of the lowest in the field, and the fact that they are compact, powerful machines with a small roadway presence and the capability to be used for multiple tasks means a high return on investment.
The four-wheel drive and rear engine arrangement are designed to offer high stability and high tractive effort whether loaded or unloaded on the roadway or installing roof supports at the longwall face.
Data not available.