308 CR
308 CR - 2018, Tier 4 Final, Stage V, NACD, EU, ANZP
Overview
The Cat® 308 CR Mini Excavator delivers maximum power and performance in a mini size to help you work in a wide range of applications.
Specifications
Units:
| Net Power | — |
| Operating Weight | — |
| Dig Depth | — |
Benefits & Features
ALL DAY COMFORT
- A sealed and pressurized cab is equipped with an improved air conditioning system, adjustable wrist rests and a suspension seat to help keep you working comfortably all day long.
EASY TO OPERATE
- Controls are easy to use and the intuitive Next Generation Monitor provides customizable machine operator preferences and easy to read machine information.
STICK STEER TRAVEL MODE
- Moving around the job site is even easier with Cat Stick Steer. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
September 10, 2024
Specifications
Units:
| Net Power | — |
| Engine Model | Cat C3.3B |
| Stroke | — |
| Bore | — |
| Gross Power - SAE J1995 | — |
| Displacement | — |
| Rated Net Power - 2,200 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269 | — |
| Operating Weight | — |
| Note (1) | *Minimum Weight is based on rubber tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket. |
| Note (2) | **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket. |
| Maximum Operating Weight with Cab** | — |
| Minimum Operating Weight with Cab* | — |
| Steel Tracks with Pads | — |
| Counterweight | — |
| Long Stick | — |
| Maximum Traction Force - High Speed | — |
| Ground Pressure - Maximum Weight | — |
| Ground Pressure - Minimum Weight | — |
| Travel Speed - High | — |
| Travel Speed - Low | — |
| Maximum Traction Force - Low Speed | — |
| Gradeability - Maximum | 30 degrees |
| Fuel Tank | — |
| Hydraulic System | — |
| Hydraulic Tank | — |
| Cooling System | — |
| Engine Oil | — |
| Digging Force - Bucket | — |
| Operating Pressure - Travel | — |
| Operating Pressure - Swing | — |
| Operating Pressure - Equipment | — |
| Digging Force - Stick - Long | — |
| Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
| Note | Flow and pressure are not combinable. Under load, as flow rises pressure goes down. |
| Pump Flow at 2,400 rpm | — |
| Digging Force - Stick - Standard | — |
| Maximum Auxiliary Circuit - Primary - Pressure at Pump | — |
| Maximum Auxiliary Circuit - Secondary - Pressure at Pump | — |
| Maximum Auxiliary Circuit - Primary - Flow at Pump | — |
| Maximum Auxiliary Circuit - Secondary - Flow at Pump | — |
| Machine Swing Speed | — |
| Boom Swing - Right | 50 degrees |
| Boom Swing - Left | 60 degrees |
| Height | — |
| Width - Standard | — |
| Width - Wide | — |
| Top Guard | ISO 10262:1998 (Level I) |
| Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 |
| Tip Over Protective Structure (TOPS) | ISO 12117:1997 |
| Operator Sound Pressure (ISO 6396:2008) | — |
| Note | European Union Directive "2000/14/EC" |
| Average Exterior Sound Pressure (ISO 6395:2008) | — |
| Cab Height | — |
| Vertical Wall | — |
| Boom In Reach | — |
| Tail Swing with Counterweight | — |
| Boom Swing - Right | — |
| Track Belt/Shoe Width | — |
| Maximum Reach | — |
| Stick Length | — |
| Maximum Blade Height | — |
| Boom Swing - Left | — |
| Maximum Blade Depth | — |
| O/A Track Width | — |
| Maximum Dig Height | — |
| Maximum Dump Clearance | — |
| Maximum Reach - Ground Level | — |
| Tail Swing without Counterweight | — |
| O/A Undercarriage Length | — |
| Swing Bearing - Height | — |
| Ground Clearance | — |
| Dig Depth | — |
| Note | *Boom Height when stick is pinned in transport position with no attachments. |
| Overall Shipping Length - with Counterweight | — |
| Note (1) | **Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position. |
| Overall Shipping Length - without Counterweight | — |
| Note (2) | ***With blade positioned at the rear of the machine. |
| Height - Boom Working - With Tools** | — |
| Height - Boom Transport - No Tools* | — |
| Dig Depth | — |
| Boom Swing - Left | — |
| Maximum Dig Height | — |
| Maximum Blade Height | — |
| Track Belt/Shoe Width | — |
| Cab Height | — |
| Tail Swing with Counterweight | — |
| O/A Undercarriage Length | — |
| Maximum Dump Clearance | — |
| Boom Swing - Right | — |
| Maximum Blade Depth | — |
| Ground Clearance | — |
| Stick Length | — |
| Maximum Reach | — |
| Maximum Reach - Ground Level | — |
| Boom In Reach | — |
| Swing Bearing - Height | — |
| O/A Track Width | — |
| Tail Swing without Counterweight | — |
| Vertical Wall | — |
| Note | *Boom Height when stick is pinned in transport position with no attachments. |
| Note (2) | ***With blade positioned at the rear of the machine. |
| Note (1) | **Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position. |
| Height - Boom Transport - No Tools* | — |
| Height - Boom Working - With Tools** | — |
| Overall Shipping Length - without Counterweight | 6872 mm (270.6 in)*** |
| Overall Shipping Length - with Counterweight | 6872 mm (270.6 in)*** |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
| Recyclability | 96% |
Benefits & Features
ALL DAY COMFORT
- A sealed and pressurized cab is equipped with an improved air conditioning system, adjustable wrist rests and a suspension seat to help keep you working comfortably all day long.
EASY TO OPERATE
- Controls are easy to use and the intuitive Next Generation Monitor provides customizable machine operator preferences and easy to read machine information.
STICK STEER TRAVEL MODE
- Moving around the job site is even easier with Cat Stick Steer. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A MINI DESIGN
- Increased lifting, swinging, travel and multi-functioning performance help you get the job done more efficiently, and blade float allows for easy clean up.
SAFETY ON THE JOB SITE
- Your safety is our top priority. The Cat Mini Excavator is designed to help keep you safe on the job. A back-up camera, courtesy work lights and a fluorescent retractable seat belt are just a few of the safety features we’ve built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME
- Maintenance is quick and easy on the Cat Mini Excavator. Routine check points are easy to access at ground level with grouped service points and robust service panels.
LOWER OPERATING COSTS
- Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat Mini Excavator was designed with reducing your operating costs in mind.
UNMATCHED DEALER SUPPORT
- Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.
SUSTAINABILITY
- The Cat® C3.3B engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
- The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
- Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
- Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).
Data not available.
Standard Equipment
- ENGINE
- Cat C3.3B Diesel Engine (U.S. EPA Tier 4 Final/EU Stage V) – Electronic Engine, Turbo, Diesel Particulate Filter (DPF)
- Automatic Engine Idle
- Automatic Engine Shutdown
- Automatic Swing Brake
- Automatic Two Speed Travel
- Fuel Water Separator with Indicator
- Radial Seal – Double Element Air Filter
- Extended Life Coolant, –37° C (–35° F)
- HYDRAULICS
- Electronic Variable Displacement Piston Pump
- Load Sensing/Flow Sharing Hydraulics
- Power On Demand
- Hydraulic Temperature Monitoring
- Certified Accumulator
- HYDO Advanced Hydraulic Oil
- OPERATOR ENVIRONMENT
- Top Guard ISO 10262 1998 Level I
- ROPS ISO 12117-2:2008
- Stick Steer Mode
- Travel Cruise Control
- Control Pattern Changer
- Adjustable Wrist Rests
- Molded Footrests
- Removable, Washable Floor Mat
- Travel Pedals and Hand Levers
- Cat Key with Passcode Option
- HVAC with Automatic Temperature Control
- Hydraulic Lockout Controls
- Integrated Lower Front Window
- Assisted Front Window Overhead Storage
- Rear Window Emergency Exit
- Fabric, High Back, Suspension Seat
- Retractable Seat Belt (75 mm/3 in)
- Coat Hook
- Cup Holder
- LED Interior Light
- Literature Holder
- Mounting Bosses for Top and Front Guards
- 12V Power Socket
- Radio – Bluetooth, Auxiliary, Microphone, USB (charging only)
- Skylight
- Signaling/Warning Horn
- Cab and (left side) Boom Work Lights
- Utility Space for Mobile Phone
- Next Generation Color LCD Monitor (IP66)<br>– Jog Dial Interface<br>– Fuel Level and Coolant Temperature Gauges<br>– Maintenance and Machine Monitoring<br>– Performance and Machine Adjustments<br>– Numeric Security Code<br>– Multiple Languages<br>– Camera Ready (IP68 & IP69K)<br>– Hour Meter with Wake Up Switch
- UNDERCARRIAGE
- Greased and Lubricated Track
- Tie Down Eyes on Track Frame
- Dozer Blade
- Dozer Float
- Bolt-on, Reversible Wear Edge
- BOOM, STICK AND LINKAGES
- One Piece Boom (3400 mm/133.9 in)
- Standard Stick (1820 mm/71.7 in)
- Front Shovel Capable – Pin-on/Manual Coupler/Hydraulic Coupler (not available in all regions)
- Thumb Ready (not available in all regions)
- ELECTRICAL
- 12 Volt Electrical System
- 60 Ampere Alternator
- Circuit Breaker
- 900 CCA Maintenance Free Battery
- Battery Disconnect
- Ignition Key Stop Switch
- OTHER
- Locks on External Enclosure Doors
- Lockable Fuel Cap
- Beacon Socket
- Rear Reflectors
Optional Equipment
- OPERATOR ENVIRONMENT
- Push to Start with Bluetooth® Key
- Air Suspension Heated Seat
- Rain Visor
- Next Generation Advanced Monitor (below are all included with Next Generation Advanced Monitor option)<br>– Touch Screen<br>– Site Reference System<br>– High Definition Camera Capable (IP68 & IP69K)<br>– Numeric Security Code
- UNDERCARRIAGE
- Wide Dozer Blade
- Steel Tracks (450 mm/17.7 in wide)
- Wide Steel Tracks (600 mm/23.6 in)
- Steel Track with Rubber Pads
- Track Guides
- BOOM, STICK AND LINKAGES
- Long Stick (2360 mm/92.9 in)
- Attachments including Buckets, Augers and Hammers
- 2nd Auxiliary Hydraulic Lines
- Boom Lowering Check Valve
- Stick Lowering Check Valve
- Certified Lifting Eye
- ELECTRICAL
- Product Link™ Elite (regulations apply)
- Travel Alarm
- Rearview Camera
- Rotating Beacon
- GUARDING
- Mesh Front Guard ISO 10262 1998 Level I
- Heavy Duty Front Guard ISO 10262 1998 Level II
- Overhead Cab Guard ISO 10262 1998 Level II
- Polycarbonate Front Window EN356 P5A
- Track Guards
- OTHER
- Additional Counterweight
- Water Jacket Heater
- Refueling Pump
- Variable Angle Boom (refer to 308 CR VAB brochure for VAB specs and additional information)
Related Products
Units:
Augers
Designed to drill holes for footings, fencing, signs and trees.
| Model | Drive Shaft Torque at Maximum Pressure | ||
|---|---|---|---|
| A68 | — | Gerotor Motor - Double Planetary Reduction | 8 Ton Mini Excavator Pin On |
Compaction Wheels
When backfilling trenches, Compaction Wheels are an option to achieve desired compaction levels at a lower price point.
| Model | Compaction Width | ||
|---|---|---|---|
| 305 mm (12 in) 7-8 Ton, Pin On | — | 2 | 7-8 Ton Mini Excavators |
| 457 mm (18 in) 7-8 Ton, Pin On | — | 3 | 7-8 Ton Mini Excavators |
| 610 mm (24 in) 7-8 Ton, Pin On | — | 3 | 7-8 Ton Mini Excavators |
| 914 mm (36 in) 7-8 Ton, Pin On | — | 5 | 7-8 Ton Mini Excavators |
| 305 mm (12 in) 1 Ton, Pin Lock | — | 2 | 1 Ton Mini Excavators |
| 457 mm (18 in) 1 Ton, Pin Lock | — | 3 | 1 Ton Mini Excavators |
| 610 mm (24 in) 1 Ton Pin Lock | — | 3 | 1 Ton Mini Excavators |
Contractors' Grapples
Contractors’ Grapples are a proven product built for your high-volume material handling needs. Designed for long-lasting durability, Contractors’ Grapples are made to help you in the toughest of applications.
| Model | Machine Class | ||
|---|---|---|---|
| G108 Stiff link | 7-9 Ton Mini Excavators | — | — |
Demolition and Sorting Grapples
Cat® Demolition & Sorting Grapples are designed for fast, productive material handling. Capable of high-volume, production loading and precise sorting, they enhance the productivity and efficiency of your operation. The grapples can handle anything from primary and secondary demolition to recycling to get the job done.
| Model | Grapple Area | ||
|---|---|---|---|
| G308 | — | — | Mini Hydraulic Excavator 7-10 Ton |
Ditch Cleaning Buckets - Mini Excavator
Used in ditch cleaning, sloping, grading and other finishing work.
| Model | Width | ||
|---|---|---|---|
| 1219 mm (48 in) | — | — | — |
| 1372 mm (54 in) | — | — | — |
| 1524 mm (60 in) | — | — | — |
Dual Lock™ Pin Grabber Couplers - Mini Excavator
Increase machine versatility and improve overall production.
| Model | Weight | ||
|---|---|---|---|
| 8 Ton Mini Excavators Manual | — | — | — |
| 8 Ton Mini Excavators Hydraulic | — | — | — |
Equipment Management
Cat® Equipment Management gives you access to the data you need to keep your equipment on the job site and earning money. You can track equipment location and hours, monitor machine use and health, then take informed action that will keep your operation running smoothly, efficiently and profitably.
| Model |
|---|
| VisionLink® |
Flail Mowers
Flail Mowers are ideal for efficient cutting and mulching of vegetation and overgrowth.
| Model | Working Width | ||
|---|---|---|---|
| HMF210 | — | Standard Flow | — |
Grading Buckets - Mini Excavator
For cleaning ditches, sloping, grading and other finishing work.
| Model | Width | ||
|---|---|---|---|
| 1200 mm (47 in) | — | — | — |
| 1500 mm (59 in) | — | — | — |
Hammers
Used for demolition and construction applications.
| Model | Operating Weight - With Tool | ||
|---|---|---|---|
| B9 | — | — | 7-10 Ton Mini Excavators, 415-450 Backhoe Loaders (no side shift) |
| B9s | — | — | 7-10 Ton Mini Excavators, 415-450 Backhoe Loaders (No Side Shift) |
| B8s | — | — | 6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders |
| H95s | — | — | 7-10 Ton Mini Excavators, 415-450 Backhoe Loaders (No Side Shift) |
| B8 | — | — | 6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders |
| B6s | — | — | 4-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders |
| B6 | — | — | 4-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders |
Heavy Duty Buckets
Ideal for semi-rocky soil or where hard bank material must be broken out and removed.
| Model | Width | ||
|---|---|---|---|
| 300 mm (12 in), Pin Lock | — | — | — |
| 406 mm (16 in), Pin Lock | — | — | — |
| 457 mm (18 in), Pin Lock | — | — | — |
| 610 mm (24 in), Pin Lock | — | — | — |
| 762 mm (30 in), Pin Lock | — | — | — |
| 914 mm (36 in), Pin Lock | — | — | — |
Heavy Duty Buckets - Mini Excavator
High strength buckets designed for maximum performance and value over a broad range of applications.
| Model | Width | ||
|---|---|---|---|
| 330 mm (13 in) | — | — | — |
| 457 mm (18 in) | — | — | — |
| 610 mm (24 in) | — | — | — |
| 762 mm (30 in) | — | — | — |
| 914 mm (36 in) | — | — | — |
Heavy Duty Rock Buckets - Mini Excavator
Used for aggressive bucket loading in highly abrasive applications such as severe rock.
| Model | Width | ||
|---|---|---|---|
| 610 mm (24 in) | — | — | — |
| 762 mm (30 in) | — | — | — |
High Capacity Buckets
Ideal for work in lower density soils and light materials.
| Model | Width | ||
|---|---|---|---|
| 406 mm (16 in), Pin Lock | — | — | — |
| 610 mm (24 in), Pin Lock | — | — | — |
| 457 mm (18 in), Pin Lock | — | — | — |
| 914 mm (36 in), Pin Lock | — | — | — |
| 762 mm (30 in), Pin Lock | — | — | — |
Mobile Scrap & Demolition Shears
Cat® Scrap and Demolition Shears are industry leaders in steel processing. Power and performance in a reliable package, backed by the best dealer network in the world.
| Model | Tip Force | ||
|---|---|---|---|
| S308 | — | 360 Degrees | — |
Nordic Grading Buckets
Ideal usage for grading applications, but suitable for general excavation, loading, and backfilling in all kinds of different soil types up to heavy duty applications.
| Model | Width | ||
|---|---|---|---|
| 1300 mm (51 in) | — | — | — |
| 1300 mm (51 in) | — | — | — |
| 1300 mm (51 in) | — | — | — |
Nordic Trenching Buckets
Ideal for trenching applications, but suitable for general excavation and backfilling in all kinds of soil types up to heavy duty applications.
| Model | Width | ||
|---|---|---|---|
| 400 mm (16 in) | — | — | — |
| 400 mm (16 in) | — | — | — |
Pallet Fork Carriages
For moving palletized loads on construction sites, handling bagged fertilizer and seed at landscaping and nursery sites.
| Model | Height | ||
|---|---|---|---|
| 1300 mm (51 in) | — | — | — |
Pin Lock Couplers - Mini Excavator
Cat® Pin Lock Couplers are fully compatible with Wain-Roy and Gannon-style buckets.
| Model | Weight | ||
|---|---|---|---|
| 8 Ton Mini Excavators Manual | — | — | — |
Pin Puller Couplers
Increase machine versatility, reduce costs, and improve overall production with Cat® Pin Puller Couplers for Mini Excavators.
| Model | Weight | ||
|---|---|---|---|
| 7-9 Ton Mini Excavators | — | — | — |
Pro Series Hydraulic Thumbs
Pro Series Hydraulic Thumbs (Pro and Pro Plus models) offer the best load control.
| Model | Number of Teeth/Tines | ||
|---|---|---|---|
| 671 mm (26 in) 4 Teeth/2 Tines | 4/2 | — | — |
| 858 mm (34 in) 6 Teeth/2 Tines | 6/2 | — | — |
Rippers
For land clearing or site preparation in rock, quarry work and similar high-impact digging applications. Combine with a coupler for Rip & Load productivity.
| Model | Shank Length | ||
|---|---|---|---|
| 861 mm (34 in) | — | — | — |
S Type Couplers
The S Type Coupler is a pin grabber style dedicated coupler. It ensures an exchangeability of tools within a fleet of machines with different platforms. Consistent tight fit to attachment, low offset, and reliability are the key features.
| Model | Weight | ||
|---|---|---|---|
| S-50 Pin Grabber 8 Ton Mini Excavators | — | — | — |
| S-50 Pin Grabber LCS 8 Ton Mini Excavators | — | — | — |
| S-45 Pin Grabber LCS 7-9 Ton | — | — | — |
Skid Steer Adapters
Coupler adapters for connecting to Cat® Skid Steer interfaces.
| Model | Weight | ||
|---|---|---|---|
| 7 - 9 Ton Excavator Class | — | — | — |
Stiff Link Thumbs
Stiff Link Thumbs feature a rigid link.
| Model | Number of Teeth/Tines | ||
|---|---|---|---|
| 437 mm (17 in) 4 Teeth/2 Tines | 4/2 | — | — |
| 432 mm (17 in) 4 Teeth/2 Tines | 4/2 | — | — |
Tilting Dual Lock™ Pin Grabber Couplers - Mini Excavator
Provides increased productivity and cost saving benefits to customers. Operators have the ability to tilt compatible work tools for more efficient jobsite versatility and productivity.
| Model | Weight | ||
|---|---|---|---|
| 8 Ton Mini Excavators Tilting Dual Lock Pin Grabber | — | — | — |
Utility Thumbs
Utility Thumbs offer hydraulic functionality, with maximum interchangeability.
| Model | Length | ||
|---|---|---|---|
| 475 mm (19 in) 4 Teeth/2 Tines | — | — | — |
| 475 mm (19 in) 6 Teeth/2 Tines | — | — | — |
