The Cat 910K Compact Wheel Loader sets a new standard for productivity, fuel efficiency and comfort. On-the-go operator tuned hydraulics and drivetrain adjust the machine's response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long. The new Cat Optimized Z-bar Loader linkage delivers the performance and breakout forces of a traditional Z-bar linkage with the parallelism and load handling capability of a tool carrier. Experience the new industry benchmark.
Maximum Gross Power | — |
Operating Weight | — |
Bucket Capacities | 1.2 m3-2.5 m3 (1.6 yd3-3.3 yd3) |
Bucket Capacities | 1.2 m3-2.5 m3 (1.6 yd3-3.3 yd3) |
General Purpose | 1.2-1.5 m3 (1.6-2.0 yd3) |
Type | Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention. |
Operating Weight | — |
Operating Weight - High Lift | — |
Operating Weight - Standard Lift | — |
Steering Cycle Times - Stop to Stop - At 2,400 rpm Engine Speed, 90 rpm Steering Wheel Speed | — |
Steering Cylinder, Double Acting - Bore Diameter | — |
Maximum Flow - Steering Pump | — |
Steering Cylinder, Double Acting - Stroke | — |
Maximum Steering Torque - 0° (Straight Machine) | — |
Maximum Working Pressure - Steering Pump | — |
Steering Cylinder, Double Acting - Rod Diameter | — |
Maximum Steering Torque - 39° (Full Turn) | — |
Number of Steering Wheel Turns - Stop to Stop, Turning Wheel at > 67 rpm | 3.75 turns |
Steering Articulation Angle - Each Direction | — |
Type | Steering system uses a dedicated pump with dual double acting cylinders. |
Number of Steering Wheel Turns - Stop to Stop, Turning Wheel at < 27 rpm | 5.75 turns |
Maximum Working Pressure - Implement Pump | — |
Main Relief Pressure | — |
Cycle Time - Dump | — |
Maximum Flow - Implement Pump - 3rd Function | — |
Maximum Pump Flow | — |
Maximum Flow - Implement Pump - 4th Function | — |
Tilt Cylinder - Stroke | — |
Tilt Cylinder - Rod Diameter | — |
Lift Cylinder - Bore Diameter | — |
Cycle time - Rackback | — |
Cycle time - Float | — |
Tilt Cylinder - Bore Diameter | — |
Cycle Time - Lower, Float | — |
Lift cylinders - Stroke | — |
Cycle Time - Lift | — |
Lift Cylinder - Rod Diameter | — |
Cooling System | — |
Fuel Tank | — |
Hydraulic System | — |
Transmission - Gear Box | — |
Hydraulic Tank - Refill | — |
Axle - Front, Each Hub | — |
Axle - Rear, Center | — |
Engine Crankcase | — |
Axle - Rear, Each Hub | — |
Axle - Front, Center | — |
Reverse - Low Range, Speed Range 1 | — |
Reverse - High Range | — |
Forward - High Range | — |
Type (1) | Changing from Low Range to High Range is on-the-go for added convenience. |
Forward - Low Range, Speed Range 2 | — |
Forward - Low Range, Speed Range 1 | — |
Reverse - Low Range, Speed Range 2 | — |
Type (2) | Creeper control allows maximum speed range adjustability from 0 to 10 km/h (6 mph) in Speed Range 1. |
Front Axle | Fixed |
Rear axle - Oscillation | �11 degrees |
Type (2) | A built-in clutch on one motor de-clutches at higher speeds to gain maximum travel speed. |
Brakes - Service Brakes | Inboard wet disc |
Front Axle - Traction Aid | Locking differential |
Brakes - Park Brake | Cable applied, spring release |
Rear Axle | Oscillating |
Rear Axle - Traction Aid | Locking differential |
Type (1) | Power train is fully hydrostatic, operating with twin motors on a gear reduction system to amplify torque. |
Tire Size - Optional (3) | 15.5-R25 |
Tire Size - Optional (2) | 16.9-24 12PR |
Tire Size - Standard | 15.5-25 12PR |
Tire Size - Optional (1) | 16.9-24 10PR |
Note | Wheel sets are interchangeable between the 910K and 914K. |
Tire Size - Non-Pneumatic - Flexport | 53.5�9�16.5 (15.5/17.5�25 equivalent) |
ROPS | ROPS: SAE J1040 MAY94, ISO 3471-1994. |
FOPS | FOPS: SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II. |
Sound | The declared dynamic operator sound pressure level per ISO 6396:2008 is: - Deluxe cab: 75 dB(A) |
Rated Bucket Capacity | — |
Full Turn Tipping Load - Standard Lift | — |
Full Turn Tipping Load - High Lift | — |
Full Turn Tip Load | — |
Reach - Full Lift and 45° Dump | — |
Steering Articulation Angle - Each Direction | — |
Clearance - Full Lift and 45° Dump | — |
Maximum Gross Power | — |
Net Power | — |
Displacement | — |
Rated Net Power - SAE J1349 | — |
Note | Engine meets U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards. |
Rated Torque | — |
Rated Net Power - ISO 9249/EEC | — |
RPM at Rated Power | — |
RPM at Peak Torque | — |
Torque Rise | — |
Peak Torque | — |
Maximum Gross Power - SAE J1995 | — |
Maximum Gross Power - ISO 14396 | — |
Bore | — |
Stroke | — |
Engine Model | Cat� C3.8 Turbo |
The Cat power train is computer controlled which actively monitors engine, operator input and drive train load, adjusting the hystat transmission to keep the machine working at peak efficiency.
Fully locking front and rear differential axles are standard and can be engaged at full torque on-the-go below 6 km/h (4 mph), with a button on the joystick. The enhanced modulation of the inching function utilizes the first half of brake pedal engagement to hydrostatically decelerate without any wear on the braking system. This allows the operator to find a rhythm in V-cycle truck loading, for instance, using the throttle and inching/braking pedal together for a faster loader while controlling ground speed. The brake system includes independent service brakes on the front and rear axles. The parking brake is mechanically activated and released with a hand lever next to the operator's seat.
An extensive range of work tools and bucket styles are available to make your Cat Wheel Loader one of the most versatile machines on the job site.
Performance Series Buckets utilize a system-based approach to balance bucket shape with the machine's linkage, weight, lift and tilt capacities. They deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a longer floor, open throat and curved side bars.
The Cat Integrated Toolcarrier coupler provides interchange with a multitude of new and legacy tools. An ISO 23727 coupler interface is also available for use with competitive work tools.
A variety of options are available on the Cat K Series Compact Wheel Loaders to suit your specific operator comfort and application needs. See your Cat dealer for more information about the features below and additional options.
Your Cat dealer is ready to help you every step of the way. From new or used machine sales, to rental or rebuild options, your Cat dealer can provide an optimal solution to your business needs. Unsurpassed worldwide parts availability, trained technicians and customer support agreements maximize your machine uptime.
Data not available.