/  Equipment  /  Wheel Loaders  /  Compact Wheel Loaders

908

908 - 14A, 2022 HRC

Overview

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 908 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles.

Specifications

Units: 
Maximum Gross Power
Operating Weight
Bucket Capacities 0.75-1.55 m³ (1.0-2.0 yd³)
See more

Benefits & Features

CONFIGURED FOR SUCCESS

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 908 Compact Wheel Loader has ahigh torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. Dependent on regional requirements our engines meet U.S. EPA Tier 4 Final and EU Stage V emission standards with a clean emission module designed to manage itself so you can concentrate on the task at hand or emit equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

ENJOY ALL DAY COMFORT

    • All new cab is spacious, quiet and comfortable with all around 360° visibility to keep you productive throughout the day. Seat-mounted controls feature a multifunction joystick for lift and tilt functions with an integrated thumb operated speed range, forward/neutral/reverse (FNR) switch, trigger operated differential lock and constant flow. Optional fourth function joystick also available.
    • Digital display with soft touch buttons for customized settings to easily control linkage and drive train to further enhance operator comfort and safety.

EFFICIENTLY POWERFUL

    • Cat C2.8 engine provides a cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar’s exclusive Intelligent Power Management system monitors operator input and available power to keep the machine working at peak efficiency.
    • “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles. New Powertrain (Utility) Mode via the display enables right pedal machine operation giving further improved operator controllability of attachment RPM versus machine ground speed over creep control and inching pedal.

  October 8, 2024

Specifications

Units: 
Engine
Maximum Gross Power
Engine Model Cat C2.8*
Maximum Engine Speed 2550 rpm
Maximum Gross Power - Rated Engine Speed
Maximum Gross Power - SAE J1995
Maximum Gross Power - ISO 14396
Maximum Gross Power - ISO 14396 (metric)
Rated Net Power - Rated Engine Speed
Rated Net Power - SAE J1349
Rated Net Power - ISO 9249
Rated Net Power - 2,400 rpm - ISO 9249 (metric)
Maximum Gross Torque - SAE J1995
Maximum Gross Torque - ISO 14396
Maximum Net Torque - SAE J1349
Maximum Net Torque - ISO 9249
Displacement
Bore
Stroke
Note Advertised power is tested per the specified standard in effect at the time of manufacture
Note (1) Net power advertised is the power available at the flywheel.
Note (2) *Two Cat C2.8 engine emission options are available: 1) Meets U.S. EPA Tier 4 Final, EU Stage V. 2) U.S. EPA Tier 3 and EU Stage IIIA equivalent. Tier 3 engine specs are 0.3 kW/0.4 hp more gross power (SAE J1995), 0.2 kW/0.3 hp on net power (SAE J1349) and 1 N·m/0.7 lb-ft higher on gross torque (SAE J1995).
Note (3) #Maximum gross and net torque measured at 1,600 rpm.
Weights
Operating Weight
Buckets
Bucket Capacities 0.75-1.55 m³ (1.0-2.0 yd³)
Bucket Capacities - General Purpose 0.80-1.35 m³ (1.0-1.7 yd³)
Multi-Purpose 0.75-1.1 m³ (1.0-1.4 yd³)
Bucket Capacities - Light Material 1.25-1.55 m³ (1.6-2.0 yd³)
Note Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Note (1) Bucket capacities stated include BOCE, in line with ISO 7546.
Service Refill Capacities
Fuel Tank
Cooling System
Engine Crankcase
Axles - Front Center Differential
Axles - Rear Center Differential
Hydraulic System - Including Tank
Hydraulic Tank
Transmission
Note No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.
Axles
Front Fixed (standard), Locking Differential (optional)
Rear Fixed (standard), Locking Differential (optional)
Note Oscillation of ±11 degrees via hitch between front and rear frames.
Steering
Steering Articulation Angle - Each Direction
Maximum Flow - Steering Pump
Maximum Working Pressure - Steering Pump
Steering Cycle Times – (full left to full right) – at High Idle
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.25 turns or 4.00 turns
Transmission
Forward and Reverse - Speed Range Creep#
Forward and Reverse - Speed Range 1*
Forward and Reverse - Speed Range 2** - High Speed
Forward and Reverse - Speed Range 2** - Standard
Forward and Reverse - Speed Range 3***
Note #Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
Note (1) *Creep function not available in this gear or above.
Note (2) **Max speed dependent on model and configuration (standard vs. high speed transmission).
Note (3) ***Reverse is 30 km/h (19 mph).
Tires
Tire Size - Standard *405/70 R20 SPT9
Tire Size - Optional 405/70 R20 Powerloads
Tire Size - Optional (1) 400/70 R20 XMCL/Bibload
Tire Size - Optional (2) 360/80 R20 TRI 2
Tire Size - Optional (3) 40X14-20 TL, SM/TR
Note *This tire has been used for all dimension, stability and performance data.
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Note (2) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Cab
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Note (1) Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.
Loader Hydraulic System
Main Relief - 1st Auxiliary (3rd slice)
Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*
Main Relief - 1st Auxiliary (3rd slice) - High Flow*
Main Relief - 2nd Auxiliary (4th slice)
Main Relief - 2nd Auxiliary (4th slice) - Flow
Hydraulic Cycle Time - Rackback
Hydraulic Cycle Time - Lift
Hydraulic Cycle Time - Dump
Hydraulic Cycle Time - Float Down
Note * Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.
Dimensions - With HPL-V Coupler - Approximate#
Height: Ground to Cab**
Height: Ground to Beacon**
Height: Ground Axle Center**
Height: Ground Clearance**
Length: Overall*
Length: Rear Axle to Bumper
Length: Hitch to Front Axle
Length: Wheel Base
Clearance: Bucket at 45° *
Clearance: Load over Height**
Clearance: Level Bucket**
Height: Bucket Pin**
Height: Overall**
Reach: Bucket at 45° *
Carry Height: Bucket Pin
Dig Depth**
Width: Bucket
Width: Tread Center
Turning Radius: Over Bucket
Width: Over Tires
Turning Radius: Outside of Tires
Turning Radius: Inside of Tires
Rack Angle at Full Lift 53°
Dump Angle at Full Lift 45°
Rack Angle at Carry 51°
Departure Angle - Degrees 30°
Articulation Angle - Degrees 39°
Operating Weight: Bucket ^
Tipping Load - Straight - ISO 14397-1 †
Tipping Load - Full Turn - ISO 14397-1 †
Operating Weight: Carriage and Tines ^^
Tipping Load - Straight †
80% of Tip: Firm and Level EN474-3 ††
Note (1) *Vary with bucket
Note (2) **Vary with tire
Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6) ††Full compliance to EN474-3 and SAE J1197.
Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8) Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9) Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Length: Front Axle to Front of Coupler
Dimensions - With SSL Coupler - Approximate
Height - Ground to Cab
Height: Ground to Beacon**
Height: Ground Axle Center**
Height - Ground Clearance
Length - Overall with Bucket
Length: Rear Axle to Bumper
Length: Hitch to Front Axle
Length - Wheel Base
Clearance - Bucket at 45°
Clearance: Load over Height**
Clearance - Level Bucket
Height - Bucket Pin
Height: Overall**
Reach - Bucket at 45°
Carry Height: Bucket Pin
Dig Depth
Width - Bucket
Width - Tread Center
Turning Radius - Over Bucket
Width - Over Tires
Turning Radius: Outside of Tires
Turning Radius - Inside Tire
Rack Angle at Full Lift 50°
Dump Angle at Full Lift 48°
Rack Angle at Carry 54°
Departure Angle - Degrees 30°
Articulation Angle - Degrees 39°
Operating Weight: Bucket ^
Tipping Load – Straight – ISO 14397-1 †
Tipping Load – Full Turn – ISO 14397-1 †
Operating Weight: Carriage and Tines ^^
Tipping Load - Straight †
80% of Tip: Firm and Level EN474-3 ††
Note (1) *Vary with bucket
Note (2) **Vary with tire
Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6) ††Full compliance to EN474-3 and SAE J1197.
Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8) Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9) Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Tipping Load - Full Turn - ISO 14397-1†
Length: Front Axle to Front of Coupler
Dimensions - High Lift - With HPL-V Coupler - Approximate#
Height: Ground to Cab**
Height: Ground to Beacon**
Height: Ground Axle Center**
Height: Ground Clearance**
Length: Overall*
Length: Rear Axle to Bumper
Length: Hitch to Front Axle
Length: Wheel Base
Clearance: Bucket at 45° *
Clearance: Load over Height**
Clearance: Level Bucket**
Height: Bucket Pin**
Height: Overall**
Reach: Bucket at 45° *
Carry Height: Bucket Pin
Dig Depth**
Width: Bucket
Width: Tread Center
Turning Radius: Over Bucket
Width: Over Tires
Turning Radius: Outside of Tires
Turning Radius: Inside of Tires
Rack Angle at Full Lift 69°
Dump Angle at Full Lift 40°
Rack Angle at Carry 48°
Departure Angle - Degrees 30°
Articulation Angle - Degrees 39°
Operating Weight: Bucket ^
Tipping Load - Straight - ISO 14397-1 †
Tipping Load - Full Turn - ISO 14397-1 †
Operating Weight: Carriage and Tines ^^
Tipping Load - Straight †
80% of Tip: Firm and Level EN474-3 ††
Note (1) *Vary with bucket
Note (2) **Vary with tire
Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6) ††Full compliance to EN474-3 and SAE J1197.
Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8) Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9) Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Dimensions - High Lift - With SSL Coupler - Approximate
Height: Ground to Cab**
Height: Ground to Beacon**
Height: Ground Axle Center**
Height: Ground Clearance**
Length: Overall*
Length: Rear Axle to Bumper
Length: Hitch to Front Axle
Length: Wheel Base
Clearance: Bucket at 45° *
Clearance: Load over Height**
Clearance: Level Bucket**
Height: Bucket Pin**
Height: Overall**
Reach: Bucket at 45° *
Carry Height: Bucket Pin
Dig Depth**
Width: Bucket
Width: Tread Center
Turning Radius: Over Bucket
Width: Over Tires
Turning Radius: Outside of Tires
Turning Radius: Inside of Tires
Rack Angle at Full Lift 66°
Dump Angle at Full Lift 40°
Rack Angle at Carry 42°
Departure Angle - Degrees 30°
Articulation Angle - Degrees 39°
Operating Weight: Bucket ^
Tipping Load - Straight - ISO 14397-1 †
Tipping Load - Full Turn - ISO 14397-1 †
Operating Weight: Carriage and Tines ^^
Tipping Load - Straight †
80% of Tip: Firm and Level EN474-3 ††
Note (1) *Vary with bucket
Note (2) **Vary with tire
Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6) ††Full compliance to EN474-3 and SAE J1197.
Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8) Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9) Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Sustainability
Recyclability 93%

Benefits & Features

CONFIGURED FOR SUCCESS

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 908 Compact Wheel Loader has ahigh torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. Dependent on regional requirements our engines meet U.S. EPA Tier 4 Final and EU Stage V emission standards with a clean emission module designed to manage itself so you can concentrate on the task at hand or emit equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

ENJOY ALL DAY COMFORT

    • All new cab is spacious, quiet and comfortable with all around 360° visibility to keep you productive throughout the day. Seat-mounted controls feature a multifunction joystick for lift and tilt functions with an integrated thumb operated speed range, forward/neutral/reverse (FNR) switch, trigger operated differential lock and constant flow. Optional fourth function joystick also available.
    • Digital display with soft touch buttons for customized settings to easily control linkage and drive train to further enhance operator comfort and safety.

EFFICIENTLY POWERFUL

    • Cat C2.8 engine provides a cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar’s exclusive Intelligent Power Management system monitors operator input and available power to keep the machine working at peak efficiency.
    • “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles. New Powertrain (Utility) Mode via the display enables right pedal machine operation giving further improved operator controllability of attachment RPM versus machine ground speed over creep control and inching pedal.

WORK MADE EASY

    • All-in-one joystick to keep eyes on the work while maximizing operation of hydro-mechanical attachments with a state of the art pressure compensated electro-hydraulic system. Optimized Z-bar linkage for great performance and versatility with buckets that now have the DNA of the larger Cat loaders, such as curved side plates and a flat torque tube for parallel reference to the cutting edge.

CUSTOMIZE YOUR EXPERIENCE

    • Work as one with your machine by customizing the controls. Operator can adjust machine responsiveness with the push of a button based on the attachment or application. Once customized, settings can be locked with “simplified mode” to ensure the machine is consistent and intuitive for every user.
    • Machine security is enhanced with a standard keycode or optional Bluetooth® technology.

PURPOSE BUILT SPECIALTY MODELS

    • Machines can be built to meet industry and application specific needs: Agriculture, General Construction, Industrial and Waste, Landscaping or Snow Removal.
    • The 908 is availble with the following specific handler arrangements: Ag Handler and Waste Handler

AFTERMARKET AND SERVICES

    • Range of services and aftermarket retrofits and upgrades available to keep your machine going and configured for your application.
    • Service and maintenance parts available, including a range of self-service options (SSO) and dealer installed kits.
    • Integrated Technology available to reduce service costs and maintenance.

SUSTAINABILITY

    • The Cat® C2.8 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
    • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
    • Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.
    • Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
    • Advanced Electro Hydraulic System provides the optimum balance of power and efficiency while giving you the control you need for your precise jobsite requirements.
    • Engine Demand Fan is hydraulically driven to provide machine cooling only when needed, improving fuel efficiency and reducing greenhouse gas emissions.
    • Hydrostatic Transmission is an efficient way to transfer engine power to the wheels at low speeds versus a torque converter.
    • Efficient HVAC regulates temperature control. No need to leave the machine running to cool the cab.
    • Shift on the go transmission, means no need to stop so you keep your momentum.

Standard Equipment

  • POWER TRAIN
    • Emissions compliant, two options (Dependent on regional regulations.)<br>– U.S. EPA Tier 4 Final and EU Stage V<br>– U.S. EPA Tier 3 and EU Stage IIIA equivalent
    • Cat C2.8 engine<br>– Diesel particulate filter (Fit for Life) or muffler (Dependent on regional regulations.)<br>– Fuel, diesel, ultra low or low Sulphur (Dependent on regional regulations.)<br>– Hydrostatic transmission, two speed, with inching function, “shift on the go”<br>– Power train mode, hystat
    • Air cleaner, two stage filter, with in cab audio/visual indicator on display
    • Axles, heavy duty, frame mounted with outboard planetary reduction
    • Closed circuit breather
    • Coolant, extended life, –36° C (–33° F)
    • Drive shaft, sealed for life, universal joints
    • Engine, auto idle shutdown, hibernation mode
    • Engine oil, ECO drain tap and hose
    • Fuel pump, priming (manual)/water separator/drain
  • HYDRAULICS
    • Hydraulic pilot shut off switch, in cab
    • Electro-hydraulic, fully proportional controls
    • Dead engine lower, lift valve, manual
    • Demand cooling fan, hydraulically drive
    • Coupler/pin on attachment ready
    • Caterpillar HYDO™ Advanced 10 hydraulic oil
    • Hystat displacement pump, infinitely variable
    • Implement valve, pressure compensated
    • Joystick, single lever, single auxiliary roller
    • Multi-function lift and tilt with loader arm float
    • Motor, single drive with dedicated implement and steering pumps
  • ELECTRICAL
    • Alternator, 100 amp sealed
    • Battery, heavy duty, 12V, 90Ah and 1,000 CCA
    • Battery disconnect switch
    • Cab mounted fuse panel
    • Lights, rear stop and turn, LED
    • Lights, roading, front halogen
    • Service (Electronic Technician™)
    • Product Link™
  • OPERATOR ENVIRONMENT
    • ROPS/FOPS certified canopy/cab<br>– 12V power outlets, interior/exterior<br>– Pedals, raised, foot, brake/inching, accelerator<br>– Lever, parking brake<br>– Cup holders (2)<br>– CB radio clip, phone holder<br>– Door release, internal (left and right)<br>– Hook, large, coat and hard hat<br>– Floormat, heavy duty, easy clean<br>– Mirrors, (2) external breakaway, (1) internal<br>– Operator station on isolation mounts<br>– Steering wheel, spinner knob, horn in center<br>– Seat belt, orange, retractable, 51 mm (2 in)<br>– Storage, personal (trays [3], seat pocket)<br>– Steering column, tilt adjusted<br>– Column mounted multi function control: lights, roading, wipers, self cancelling turn signals<br>– Quick coupler switch, in cab
    • Display, analog and digital<br>– Gauges (2), hydraulic oil, engine coolant<br>– Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages)
    • Joystick, seat mounted, standard multifunction<br>– FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn<br>– Arm rest, padded right, multiple position vertical height
    • Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl
    • Cab<br>– Doors (2), fixed glass<br>– Wipers, front and rear, full front coverage<br>– Windshield, front single piece<br>– Window, rear heated<br>– Radio ready, speakers and wiring<br>– Air vents, (4) screen, (7) directional<br>– Heating, mechanical control unit<br>– Sun visor, solid, front full width<br>– Interior light (incandescent)
  • OTHER
    • Fenders, front and rear
    • Ground level easy access daily service points
    • Loader arm safety brace
    • Lockable main and side engine enclosures
    • Lockable, fuel cap, HVAC filters, nose cone
    • Machine lifting/tie down points
    • Paint, Electro-Coat primer, gloss topcoat
    • Recovery hitch with pin
    • Scheduled Oil Sampling (S·O·S℠) ports, engine oil and hydraulic oil

Optional Equipment

  • POWER TRAIN
    • Antifreeze, extended life coolant, –50° C (–58° F)
    • Cold start – jacket water heater, bypass valve
    • Creep and throttle lock function
    • Fuel pump, priming, electric (Dependent on regional regulations.)
    • 40 km/h (25 mph) hydrostatic transmission, 3-speed, “shift on the go”, secondary steering and boosted brakes
    • Power train mode, utility (includes keypad)
  • ELECTRICAL
    • Lighting packages, multiple; front, rear, engine bay (LED or HAL)
    • Push to start
    • Work tool wiring harness, (3) in cab switches
  • HYDRAULICS
    • Auxiliary flow, single standard (3) valve, single high flow (3) valve, dual high flow (4) valve
    • Caterpillar Bio HYDO Advanced hydraulic oil
    • Connect under pressure and case drain
    • Ride Control or load check valves*
    • Reversing fan
    • Quick disconnect auxiliary hydraulics
  • OPERATOR STATION
    • Air Conditioning, automatic temperature control (ATC)
    • Doors, sliding windows (left and right)
    • Interior light, door activated
    • Joystick, FNR, twin auxiliary roller, differential lock, horn
    • Joystick, seat mounted, multifunction
    • Mirrors (2) electronically adjustable, heated external, plus lower parabolic mirror
    • Phone holder, spring loaded
    • Radio, FM or digital audio broadcast
    • Seat belt options, multiple
    • Seat packages; deluxe or premium
    • Secondary display, front or rear view camera
    • Soft touch keypad options, 8 or 16 button
    • Storage, lockable box or lockable cooled box
    • Sun visor, rear perforated
    • USB ports (2), interior
  • OTHER
    • Couplers, vertical (SSL), horizontal (HPL-V, HPL-A)
    • Rotary sensors (snubbing, kickouts, parallel)
    • High lift option

View 360