The Cat® 910M Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a toolcarrier.
Maximum Gross Power | — |
Operating Weight | — |
Bucket Capacities | 1.3-1.9 m3 (1.7-2.5 yd3) |
With high full turn tipping loads, powerful breakout forces and increased engine power the M Series delivers a balanced solution for all customer applications.
The Cat® Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control. Multi-function work has never been easier with dedicated pumps for each system, allowing the operator to simultaneously lift, steer and drive without compromise.
Operating Weight | — |
Cooling System | — |
Fuel Tank | — |
Hydraulic System - Including Tank | — |
Engine Crankcase | — |
Diesel Exhaust Fluid (DEF) Tank | — |
Note | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
Axles - Rear Center Differential | — |
Hydraulic Tank | — |
Axles - Front Center Differential | — |
Transmission | — |
Rated Bucket Capacity | — |
Maximum Gross Power | — |
Net Power | — |
Rated Net Power - SAE J1349 | — |
Rated Net Power - Rated Engine Speed | — |
Maximum Gross Power - ISO 14396 (DIN) | — |
Maximum Gross Power - ISO 14396 | — |
Maximum Gross Power - Maximum Engine Speed | — |
Engine Model | Cat C4.4 ACERT� |
Maximum Gross Power - SAE J1995 | — |
Emissions | Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. |
Stroke | — |
Bore | — |
Maximum Gross Torque - ISO 14396 | — |
Rated Net Power - ISO 9249 (DIN) | — |
Maximum Gross Torque - SAE J1995 | — |
Rated Net Power - ISO 9249 | — |
Note | Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
Displacement | — |
Bucket Capacities | 1.3-1.9 m3 (1.7-2.5 yd3) |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level II |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Note (4) | *The measurements were conducted with the cab doors and windows closed. |
Note (3) | The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). |
Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A). |
Hydraulic Cycle Time - Dump, at Maximum Reach | — |
Relief Pressure - Tilt Cylinder | — |
Maximum Flow - Implement Pump | — |
Maximum Working Pressure - Implement Pump | — |
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure | — |
Hydraulic Cycle Time - Rackback | — |
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift | — |
Hydraulic Cycle Time - Total Cycle Time | — |
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level | — |
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow | — |
Maximum Flow - Implement Pump - 4th Function, Maximum Flow | — |
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure | — |
Note | *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |
Forward and Reverse - Low Range, Speed Range 1* | — |
Forward and Reverse - Low Range, Speed Range 2* | — |
Forward and Reverse - High Range | — |
Steering Articulation Angle - Each Direction | — |
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed | — |
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | — |
Maximum Working Pressure - Steering Pump | — |
Maximum Flow - Steering Pump | — |
Maximum Net Torque - ISO 9249 | — |
Maximum Net Torque - SAE J1349 | — |
Front | Fixed; Locking differential (standard) |
Rear | Oscillating �11 degrees; Locking differential (Standard) |
Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
Other Choices Include | 15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport� |
Note (2) | In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities. |
Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
Standard Size | 15.5-25 12PR |
With high full turn tipping loads, powerful breakout forces and increased engine power the M Series delivers a balanced solution for all customer applications.
The Cat® Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control. Multi-function work has never been easier with dedicated pumps for each system, allowing the operator to simultaneously lift, steer and drive without compromise.
State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application.
Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.
Data not available.