The Cat® R1600H Underground Loader has a powertrain tuned specifically for speed on grade — mastering poor floor conditions and delivering maximum production in all speed ranges. It has the necessary strength and durability to work in tough conditions, but its precise controls and efficient operation set it apart. It offers superior stability, exceptional digging and lifting, and a variety of efficiency-boosting functions, plus a transmission that delivers constant power. The R1600H also offers a number of safety features, from FOPS/ROPS certified cab and safety glass to the ability to incorporate autonomous operation. Thanks to the extreme durability designed into the structure, the
loader can be productive through up to four rebuilds. The R1600H is an ideal match for the Cat AD30 truck.
Engine Model | Cat® C11 |
Engine Power - Tier 3 Engine - ISO 14396:2002 | — |
Nominal Payload Capacity | — |
Engine Model | Cat® C11 |
Engine Power - Tier 3 Engine - ISO 14396:2002 | — |
Engine Power - VR Engine - ISO 14396:2002 | — |
Bore | — |
Stroke | — |
Displacement | — |
Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (59° F) and fuel inlet temperature 40° C (104° F). |
Note (3) | No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine. |
Note (4) | Optional Ventilation Reduction package available. |
Note (5) | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available. |
Nominal Payload Capacity | — |
Gross Machine Mass | — |
Static Tipping Load - Straight Ahead - Lift Arms Horizontal | — |
Static Tipping Load - Full Turn - Lift Arms Horizontal | — |
Breakout Force - Tilt (ISO) | — |
Breakout Force - Lift (ISO) | — |
Operating Mass* | — |
Operating Mass* - Front Axle | — |
Operating Mass* - Rear Axle | — |
Operating Mass + Rated Payload* | — |
Operating Mass + Rated Payload* - Front Axle | — |
Operating Mass + Rated Payload* - Rear Axle | — |
Note | *Calculated weights. |
Forward - 1 | — |
Forward - 2 | — |
Forward - 3 | — |
Forward - 4 | — |
Reverse - 1 | — |
Reverse - 2 | — |
Reverse - 3 | — |
Reverse - 4 | — |
Raise | — |
Dump | — |
Lower, Empty, Float Down | — |
Total Cycle Time | — |
Bucket Capacities | 4.2-5.9 m³ (5.5-7.7 yd³) |
Dump Bucket - 1 | — |
Dump Bucket - 2 - Standard Bucket | — |
Dump Bucket - 3 | — |
Dump Bucket - 4 | — |
Ejector Bucket | — |
Bolt Together Bucket | — |
Outside Clearance Radius* | — |
Inner Clearance Radius* | — |
Axle Oscillation | 10° |
Articulation Angle | 42.5° |
Note | *Clearance dimensions are for reference only. |
Tire Size | 18 × R25 |
Engine Crankcase - With Filter | — |
Transmission | — |
Hydraulic Tank | — |
Cooling System | — |
Front Differential and Final Drives | — |
Rear Differential and Final Drives | — |
Fuel Tank | — |
Secondary Fuel Tank - If Equipped | — |
Standards | ROPS/FOPS Certified Cab |
Data not available.