The 950M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up clutch torque converter, standard manual front locking differential axles, and improved standard ride control to significantly improve your fuel economy, performance and ergonomics. This machine delivers the reliability, durability, and versatility you’ve come to expect from a Cat machine.
Net Power - ISO 9249 | — |
Operating Weight | — |
Bucket Capacities | 2.5-9.2 m³ (3.3-12.0 yd³) |
Net Power - ISO 9249 | — |
Emissions | Tier 3/Stage IIIA |
Maximum Power - 2,000 rpm - SAE J1995 | — |
Maximum Net Power - 2,000 rpm - SAE J1349 | — |
Maximum Power - 2,000 rpm - ISO 14396 - Metric | — |
Engine Model | Cat C7.1 |
Peak Gross Torque - 1,400 rpm - SAE J1995 | — |
Maximum Power - 2,000 rpm - ISO 14396 | — |
Maximum Net Power - 2,000 rpm - ISO 9249 - Metric | — |
Peak Gross Torque - 1,400 rpm - ISO 14396 | — |
Maximum Net Power - 2,000 rpm - ISO 9249 | — |
Displacement | — |
Maximum Net Torque - 1,400 rpm | — |
Operating Weight | — |
Note | Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m3 (4.1 yd3) general purpose bucket with BOCE. |
Bucket Capacities | 2.5-9.2 m³ (3.3-12.0 yd³) |
Breakout Force | — |
Static Tipping Load - Full 40° Turn - With Tire Deflection | — |
Static Tipping Load - Full 40° Turn - No Tire Deflection | — |
Note (1) | For a machine configuration as defined under "Weight." |
Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Reverse - 2 | — |
Forward - 4 | — |
Forward - 1 | — |
Forward - 2 | — |
Reverse - 3 | — |
Reverse - 1 | — |
Forward - 3 | — |
Forward - 5 | — |
Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius. |
Implement System - Maximum Operating Pressure | — |
Implement System - Maximum Pump Output at 2,150 rpm | — |
Hydraulic Cycle Time - Total | — |
Implement Pump Type | Variable Axial Piston |
Transmission | — |
Fuel Tank | — |
Cooling System | — |
Hydraulic Tank | — |
Crankcase | — |
Differential - Final Drives - Rear | — |
Differential - Final Drives - Front | — |
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) | 75 dB(A)* |
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) | — |
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | — |
Note | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
Overall Length - Without Bucket | — |
Height - Top of Exhaust Pipe | — |
Hinge Pin Height at Carry Height | — |
Centerline of Rear Axle to Hitch | — |
Height - Top of Hood | — |
Rack Back - Maximum Lift | 59 degrees |
Ground Clearance | — |
Wheel Base | — |
Lift Arm Clearance at Maximum Lift | — |
Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
Rack Back at Ground | 38 degrees |
Centerline of Rear Axle to Edge of Counterweight | — |
Height - Top of ROPS | — |
Maximum Width - Over Tires - Loaded | — |
Hinge Pin Height at Maximum Lift | — |
Rack Back - Carry Height | 46 degrees |
Tread Width | — |
Rack Back at Ground | 42 degrees |
Height - Top of Hood | — |
Hinge Pin Height at Maximum Lift | — |
Hinge Pin Height at Carry Height | — |
Tread Width | — |
Rack Back - Maximum Lift | 56 degrees |
Ground Clearance | — |
Overall Length - Without Bucket | — |
Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
Height - Top of ROPS | — |
Centerline of Rear Axle to Hitch | — |
Centerline of Rear Axle to Edge of Counterweight | — |
Wheel Base | — |
Lift Arm Clearance at Maximum Lift | — |
Height - Top of Exhaust Pipe | — |
Maximum Width - Over Tires - Loaded | — |
Rack Back - Carry Height | 49 degrees |
Emissions | Tier 3/Stage IIIA |
Bucket Range | 2.5-9.2 m³ (3.3-12.0 yd³) |
Data not available.