966M (Tier 3/Stage IIIA)Non-Current
966M - 2016, Tier 3, Stage IIIA, NACD, EU, ANZ
Overview
The new 966M Wheel Loader has an ACERT™ engine equipped with a combination of proven electronic, fuel, and air components. Applying proven technologies systematically and strategically lets us meet our customer's high expectations for productivity, fuel efficiency, reliability and service life. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to operators. Aggregate Handler and other optional configurations are available. (Optional configuration and equipment may vary from region to region. Consult your Caterpillar representative for further details.)
Specifications
Units:
| Operating Weight | — |
| Engine Model | Cat C9.3 ACERT |
| Displacement | — |
Benefits & Features
Key Features
Benefits to help get your work done efficiently and effectively
RELIABILITY, PRODUCTIVITY AND FUEL EFFICIENCY
- 10% more fuel efficient than K Series*
- Up to 25% more efficient than H Series*
Linkage and Work Tools
- Performance Series buckets and range of work tools
- Fusion™ « zero-offset » coupler (option)
Specifications
Units:
| Engine Model | Cat C9.3 ACERT |
| Displacement | — |
| Maximum Gross Power - 1,800 rpm - ISO 14396 - Metric | — |
| Maximum Gross Power - 1,800 rpm - SAE J1995 | — |
| Maximum Gross Power - 1,800 rpm - ISO 14396 | — |
| Maximum Net Power - 1,700 rpm - SAE J1349 | — |
| Net Power - ISO 9249 | — |
| Maximum Gross Power - 1,800 rpm - SAE J1995 - Metric | — |
| Maximum Net Power - 1,700 rpm - SAE J1349 - Metric | — |
| Maximum Net Power - 1,700 rpm - ISO 9249 | — |
| Maximum Net Power - 1,700 rpm - ISO 9249 - Metric | — |
| Peak Gross Torque - 1,200 rpm - SAE J1995 | — |
| Maximum Net Torque - 1,000 rpm | — |
| Peak Gross Torque - 1,200 rpm - ISO 14396 | — |
| Cooling System | — |
| Crankcase | — |
| Transmission | — |
| Hydraulic Tank | — |
| Differential - Final Drives - Rear | — |
| Differential - Final Drives - Front | — |
| Fuel Tank | — |
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** | — |
| Note (1) | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** | 108 Lwa*** |
| With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | — |
| Note (2) | **For machines in countries that adopt the ?EU Directives.? |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) | — |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) | 76 dB(A)* |
| Note (3) | ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.? |
| Operating Weight | — |
| Note | Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 4.2 m3 (5.5 yd3) general purpose bucket with BOCE. |
| Forward - 1 | — |
| Forward - 2 | — |
| Forward - 3 | — |
| Forward - 4 | — |
| Reverse - 1 | — |
| Reverse - 2 | — |
| Reverse - 3 | — |
| Reverse - 4 | — |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius. |
| Breakout Force | — |
| Static Tipping Load - Full 37° Turn - With Tire Deflection | — |
| Static Tipping Load - Full 37° Turn - No Tire Deflection | — |
| Note (1) | For a machine configuration as defined under ?Weight.? |
| Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Bucket Capacities | 2.5-9.2 m? (3.25-12.0 yd?) |
| Implement System - Maximum Operating Pressure | — |
| Implement System - Maximum Pump Output at 2,200 rpm | — |
| Implement Pump Type | Variable Displacement Piston |
| Hydraulic Cycle Time - Total | — |
| Wheel Base | — |
| Height - Top of ROPS | — |
| Centerline of Rear Axle to Hitch | — |
| Tread Width | — |
| Hinge Pin Height at Carry | — |
| Overall Length - Without Bucket | — |
| Rack Back - Carry Height | 49 degrees |
| Height - Top of Hood | — |
| Rack Back at Ground | 39 degrees |
| Note | All dimensions are approximate and based on L3 XHA2 tires. |
| Rack Back - Maximum Lift | 71 degrees |
| Centerline of Rear Axle to Edge of Counterweight | — |
| Hinge Pin Height at Maximum Lift | — |
| Lift Arm Clearance at Maximum Lift | — |
| Height - Top of Exhaust Pipe | — |
| Ground Clearance | — |
| Maximum Width over Tires | — |
| Ground Clearance | — |
| Height - Top of Exhaust Pipe | — |
| Overall Length - Without Bucket | — |
| Centerline of Rear Axle to Hitch | — |
| Height - Top of ROPS | — |
| Note | All dimensions are approximate and based on L3 XHA2 tires. |
| Hinge Pin Height at Carry | — |
| Centerline of Rear Axle to Edge of Counterweight | — |
| Tread Width | — |
| Maximum Width over Tires | — |
| Hinge Pin Height at Maximum Lift | — |
| Rack Back at Ground | 42 degrees |
| Lift Arm Clearance at Maximum Lift | — |
| Height - Top of Hood | — |
| Wheel Base | — |
| Rack Back - Carry Height | 50 degrees |
| Rack Back - Maximum Lift | 62 degrees |
Benefits & Features
Key Features
Benefits to help get your work done efficiently and effectively
RELIABILITY, PRODUCTIVITY AND FUEL EFFICIENCY
- 10% more fuel efficient than K Series*
- Up to 25% more efficient than H Series*
Linkage and Work Tools
- Performance Series buckets and range of work tools
- Fusion™ « zero-offset » coupler (option)
Engine and Aftertreatment Advancements
- Cat® C9.3 ACERT engine
- Meets U.S. EPA Tier 3/EU Stage IIIA equivalent emissions standards
- Productive economy mode
Transmission Advancements
- Powershift transmission with single clutch speed shifts and torque based down shifts
- Lock up clutch torque converter with lock-to-lock shifting
- Split flow oil system and multi-viscosity oil
Axle Advancements
- On-the-go disc-type front differential locks (front and rear fully automatic option)
- Caliper disc parking brake
- Bevel gear shrouds
Next Generation Hydraulic Systems
- Next generation main valve
- Next generation ride control system with dual accumulators
- Next generation implement pump with increased displacement
- Full flow and kidney loop filtration
- Load-sensing hydraulics with simultaneous hydraulic functions
- 3rd and 4th function (option)
EASE OF OPERATION – Best-in-class Operator Environment
- Optimized all-around visibility
- E-H joystick steering (steering wheel optional)
- Touch screen multifunction color display with integrated controls and rearview camera
- Stair-like ingress and egress
- New wider door and increased glass area
- Seat-mounted fingertip electro-hydraulic implement controls
- Large convex rearview mirrors with integrated spot mirror
- Remote door opening (option)
- Automatic climate control
- Viscous cab mounts
- Low operator sound levels
EASE OF OPERATION – Advanced Technology with Cat Connect
- Link technologies, like Product Link™ to monitor equipment and manage production using online VisionLink® software
- Payload technologies, like Cat Production Measurement (option) to measure payloads and optimize productivity
- Detect technologies, like the rear vision camera to keep people safe and help the operator work more productively
SERVICE ACCESS
- One-piece tilting hood with side and rear doors
- Centralized service centers for hydraulic and electrical components
- Windshield cleaning platform and harness tie-off
Data not available.