Cat M Series Motor Graders have become the industry standard in operational efficiency and overall productivity. From building roads to maintaining them, M Series Motor Graders are designed to help you get more work done in less time. Unprecedented operator comfort and ease of service help to maximize your return on investment.
Base Power (1st Gear) - Net | — |
Operating Weight - Typically Equipped | — |
Blade Width | — |
Base Power (1st Gear) - Net | — |
Engine Model | Cat® C11 ACERT™ VHP |
Bore | — |
Stroke | — |
Speed at Rated Power | 1,800 rpm |
VHP Plus Range - Net - Metric | 193-221 kW (262-301 hp) |
Base Power (1st Gear) - Net - Metric | — |
Torque Rise | 21% |
VHP Plus Range - Net | 193-221 kW (259-297 hp) |
Maximum Torque - VHP Plus - Net | — |
VHP Range - Net | 193-205 kW (259-275 hp) |
VHP Range - Net - Metric | 193-205 kW (262-279 hp) |
Displacement | — |
Number of Cylinders | 6 |
Derating Altitude | — |
Standard - Fan Speed - Maximum | 1,450 rpm |
Standard - Fan Speed - Minimum | 550 rpm |
Standard - Ambient Capability | — |
High Ambient - Fan Speed - Maximum | 1,650 rpm |
High Ambient - Fan Speed - Minimum | 550 rpm |
High - Ambient Capability | — |
Forward/Reverse Gears | 8 Forward/6 Reverse |
Transmission | Direct drive, power shift, Countershaft |
Brakes - Service | Oil-actuated, oil-disc |
Brakes - Service - Surface Area | — |
Brakes - Parking | Spring applied, hydraulically released |
Brakes - Secondary | Oil-actuated, oil-disc |
Circuit Type | Electro-hydraulic load sensing, closed center |
Pump Type | Variable piston |
Pump Output | — |
Maximum System Pressure | — |
Standby Pressure | — |
Top Speed - Forward | — |
Top Speed - Reverse | — |
Turning Radius - Outside Front Tires | — |
Steering Range - Left/Right | 47.5° |
Articulation Angle - Left/Right | 20° |
Forward - 1st | — |
Forward - 2nd | — |
Forward - 3rd | — |
Forward - 4th | — |
Forward - 5th | — |
Forward - 6th | — |
Forward - 7th | — |
Forward - 8th | — |
Reverse - 1st | — |
Reverse - 2nd | — |
Reverse - 3rd | — |
Reverse - 4th | — |
Reverse - 5th | — |
Reverse - 6th | — |
Fuel Capacity | — |
Cooling System | — |
Hydraulic System - Tank | — |
Engine Oil | — |
Transmission - Differential - Final Drives | — |
Tandem Housing - Each | — |
Front Wheel Spindle Bearing Housing | — |
Circle Drive Housing | — |
Drawbar - Width | — |
Circle - Diameter | — |
Circle - Blade Beam Thickness | — |
Drawbar - Height | — |
Front Frame Structure - Height | — |
Front Frame Structure - Width | — |
Front Frame Structure - Thickness | — |
Front Axle - Height to Center | — |
Front Axle - Wheel Lean - Left/Right | 17.1° |
Front Axle - Total Oscillation per Side | 32° |
Height | — |
Width | — |
Sidewall Thickness - Inner | — |
Sidewall Thickness - Outer | — |
Drive Chain Pitch | — |
Wheel Axle Spacing | — |
Tandem Oscillation - Front Up | 15° |
Tandem Oscillation - Front Down | 25° |
Blade Width | — |
Moldboard - Height | — |
Moldboard - Thickness | — |
Arc Radius | — |
Throat Clearance | — |
Cutting Edge Width | — |
Cutting Edge Thickness | — |
End Bit - Width | — |
End Bit - Thickness | — |
Width | — |
Blade Pull - Maximum | — |
Moldboard - Width | — |
Down Pressure - Base | — |
Down Pressure - Maximum | — |
Blade Pull - Base | — |
Circle Centershift - Right | — |
Circle Centershift - Left | — |
Moldboard Sideshift - Right | — |
Moldboard Sideshift - Left | — |
Maximum Blade Position Angle | 65° |
Blade Tip Range - Forward | 40° |
Blade Tip Range - Backward | 5° |
Maximum Lift Above Ground | — |
Maximum Depth of Cut | — |
Maximum Shoulder Reach Outside of Tires - Left | — |
Maximum Shoulder Reach Outside of Tires - Right | — |
Ripping Depth - Maximum | — |
Ripper Shank Holders | 7 |
Shank Holder Spacing - Minimum | — |
Shank Holder Spacing - Maximum | — |
Penetration Force | — |
Pry-Out Force | — |
Machine Length Increase, Beam Raised | — |
Operating Weight - Typically Equipped | — |
Gross Vehicle Weight - Typically Equipped | — |
Gross Vehicle Weight - Maximum - Rear Axle | — |
Gross Vehicle Weight - Base - Front Axle | — |
Gross Vehicle Weight - Base - Rear Axle | — |
Gross Vehicle Weight - Maximum - Total | — |
Gross Vehicle Weight - Maximum - Front Axle | — |
Gross Vehicle Weight - Typically Equipped - Total | — |
Gross Vehicle Weight - Base - Total | — |
Gross Vehicle Weight - Typically Equipped - Rear Axle | — |
Gross Vehicle Weight - Typically Equipped - Front Axle | — |
Height - Top of Cab Product Link - Cellular | — |
Length - Push Plate to Ripper Retracted | — |
Height - Top of Cab | — |
Length - Counterweight to Ripper | — |
Width - Outside Front Tires | — |
Length - Front Axle to Mid Tandem | — |
Length - Front Tire to Rear of Machine | — |
Length - Front Axle to Moldboard | — |
Length - Between Tandem Axles | — |
Width - Outside Rear Tires | — |
Width - Tire Center Lines | — |
Height - Front Axle Center | — |
Height - Exhaust Stack | — |
Height - Top of Cylinders | — |
Ground Clearance - Rear Axle | — |
Steering | ISO 5010:1992 |
Sound | ISO 6394/ISO 6395 |
ROPS/FOPS | ISO 3471/ISO 3449 |
Brakes | ISO 3450 |
Gear - Forward 6th | — |
Gear - Forward 5th | — |
Gear - Reverse 1st | — |
Gear - Forward 3rd | — |
Gear - Reverse 3rd-6th | — |
Gear - Reverse 2nd | — |
Gear - Forward 7th | — |
Gear - Forward 2nd | — |
Gear - Forward 4th | — |
Gear - Forward 1st | — |
Gear - Forward 8th | — |
Gear - Forward 5th | — |
Gear - Reverse 2nd | — |
Gear - Reverse 3rd-6th | — |
Gear - Forward 7th | — |
Gear - Forward 8th | — |
Gear - Forward 6th | — |
Gear - Reverse 1st | — |
Gear - Forward 3rd | — |
Gear - Forward 1st | — |
Gear - Forward 4th | — |
Gear - Forward 2nd | — |
Experience the most spacious, comfortable cab in the industry. Simple, intuitive joystick controls replace conventional levers, steering wheel and transmission control handle so hand and arm movement is reduced by 78%, helping to reduce operator fatigue. Rocker switches and control levers are in easy reach. A standard Cat Comfort Series suspension seat and electronically adjustable control pods add even more to comfort and productivity. Multiple isolation mounts significantly reduce sound and vibration for a more relaxed work environment. The high capacity Heating, Ventilation and Air Conditioning (HVAC) system dehumidifies and pressurizes the cab, circulates fresh air, seals out dust and keeps windows clear. A standard cage fan and dual pop-out louvers help improve fresh air circulation too. An optional deluxe radio with CD features MP3 and Bluetooth technology.
Good visibility is key to your safety and efficiency. Large windows make it easy to see the moldboard and tires, as well as behind the machine. A rear vision camera is available to enhance your sight lines to the rear of the machine and an optional anti-icing window feature will help keep windows clear during cold and snowy conditions.
Easy-to-read, high-visibility gauges and warning lamps keep you aware of critical system information. Cat Messenger offers multi-lingual real-time machine performance and diagnostic data to help you get the most from your machine.
Two electro-hydraulic joysticks with electronically adjustable control pods help position operators for optimal comfort, visibility and productive operation.
The left joystick controls steering, articulation (with standard push-button return-to-center feature), wheel lean, gear selection and directional control, and left moldboard lift cylinder (with standard float capability). The right joystick controls drawbar, circle and moldboard functions as well as right moldboard cylinder (with standard float capability). It also houses the electronic throttle control and manual differential lock/unlock. The steer tire angle mirrors the joystick lean angle or position, providing similar feel to steering. A brake tensioning system holds the joystick in position until the operator moves it. The steering control automatically reduces steering sensitivity at higher ground speeds. A Programmable Auxiliary Hydraulic Pod controls up to six additional hydraulic circuits.
Operators get precise and consistent throttle operation, with automatic/manual modes that allow you to adjust for application and operator preferences.
Automatically returns the machine to a straight frame position from any angle with the touch of a button.
Choose the blade lift modulation mode that best fits your application or operating style: Fine, Normal, or Coarse.
The Cat C11 engine with ACERT Technology gives you the performance to maintain consistent grading speeds for maximum productivity. Superior torque and lugging capability pulls through sudden, short-term load increases. ACERT Technology lowers combustion chamber temperatures and optimizes fuel combustion to generate more work output for your fuel cost. Variable Horsepower (VHP) is standard, delivering additional horsepower 3.73 kW (5 hp) in forward gears 1-4 and reverse gears 1-3. This balances traction, speed and horsepower to optimize rimpull and conserves fuel. VHP Plus is optional, giving you an additional 3.73 kW (5 hp) in gears 5-8 for more power at higher speeds.
The hydraulic demand fan automatically adjusts fan speed to meet engine cooling requirements. When demand is reduced, you benefit from more power to the ground and improved fuel efficiency.
A standard ether starting aid helps cold-weather startups in extreme temperatures.
This standard feature can be software-enabled by your Cat dealer to shut down the engine after a set period of time to save you fuel and help reduce emissions.
The sealed spindle keeps front axle bearings lubricated and protected from contaminants. The Cat “Live Spindle” design places the larger tapered roller bearing on the outside, where the load is greater, extending bearing life. A bolt-on modular rear axle improves serviceability and contamination control with easy access to differential components.
Oil-bathed multi-disc service brakes are hydraulically actuated for smooth, predictable braking and lower operating costs. Brakes are located at each tandem wheel for a large total brake surface area to give you dependable stopping power and longer life.
Caterpillar designs frame and drawbar components for performance and durability in heavy duty applications. The one-piece forged steel circle stands up to high stress loads, and a sacrificial wear system helps keep your service time and costs down. The articulation hitch features a large tapered roller bearing to carry loads evenly and smoothly. It is sealed to prevent contamination and a locking pin prevents articulation for safety during service or transport.
The drawbar, circle and moldboard are designed to make it easy to keep the components tight. One person can easily adjust or replace the patented top-adjust drawbar wear inserts from the top of the drawbar plate, reducing downtime to save you money. Durable nylon composite wear inserts maximize circle torque and component life. Sacrificial brass wear strips between the blade mounting group and moldboard can be easily adjusted and replaced. Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.
Aggressive blade angle allows material to roll more freely along the blade for better material control. Heat-treated rails, hardened cutting edges and end bits, and heavy duty bolts to give you greater moldboard reliability and long service life. The 5-position link bar allows extreme moldboard positioning for easier bank sloping and ditch cutting/cleaning.
Allows the blade to move freely under its own weight. By floating both cylinders, the blade can follow the contours of the haul road. Floating only one cylinder permits the toe of the blade to follow a hard surface while the operator controls the slope with the other lift cylinder.
Large, separate hydraulic oil supplies prevent cross-contamination and provide proper oil cooling, which reduces heat build-up and extends component life. Cat XT™ hose allows high pressures for maximum power and reduced downtime.
Standard feature keeps the parking brake engaged and hydraulic implements disabled until the operator is initially seated and the machine is ready for operation.
Standard function makes steering less sensitive as ground speed increases for greater operator confidence and control.
Standard system automatically engages an electric hydraulic pump in case of a drop in steering pressure so the operator can steer the machine to a stop.
Disables all implement functions while still providing machine steering control. This standard safety feature is especially useful while roading.
Brakes at each tandem wheel eliminate braking loads on the power train. Redundant brake systems utilize accumulators to enable stopping in case of engine failure.
Perforated steel tandem walkways and convenient grab rails offer a sturdy platform and support for moving on, off and around the machine.
An optional rear vision camera with in-cab monitor helps enhance your sight lines to the rear of the machine.
Protects the drawbar, circle and moldboard from shock loads when the blade encounters an immovable object. This standard feature also reduces the possibility of abrupt directional changes in poor traction conditions.
Help absorb impact loads to the moldboard by allowing vertical blade travel. This optional feature helps reduce wear and aids operator safety.
Cat Grade Control Cross Slope is an optional fully integrated, factory installed system that helps your operator more easily maintain desired cross slope by automatically controlling one side of the blade. The system is job-ready from day one, and scalable with AccuGrade™ upgrade kits that provide additional 2D and/or 3D control.
The AccuGrade Attachment Ready Option can be ordered as a factory or dealer-installed option. It includes built-in mounting points and internal wiring to make installation of the AccuGrade system faster and easier.
AccuGrade uses positioning and guidance technologies, machine sensors, and automatic blade control to help your operators get to grade faster, easier and more efficiently. Digital design plans, real-time cut/fill data, and in-cab guidance give operators detailed information to work more confidently and accurately, in fewer passes, using less material. Operators can stay on grade and improve productivity and accuracy by nearly 50 percent over conventional methods. Grade stakes and checkers are minimized, helping to make the work site safer and more cost effective. AccuGrade technologies include Cross Slope, Sonic, Laser, GPS, and/or Universal Total Station (UTS).
Product Link gives you remote monitoring capabilities for one machine or your entire fleet. Track asset location, hours, fuel usage, diagnostic codes, idle time and more through the secure VisionLink® user interface. Knowing where your equipment is and how it's performing enables you or your Cat dealer to manage your fleet in real-time so you can maximize efficiency, improve productivity and lower operating costs.* *Product Link licensing not available in all areas. Please consult your Cat dealer for availability.
Cat motor graders are designed to help you increase uptime and reduce costs. Grouped service points and extended service intervals save maintenance time. Optional Fast-Fill allows you to refuel in less than two minutes to get back on the job quickly.
When it comes to supporting you, Cat dealers are second to none. From machine selection and purchase to maintenance support and rebuilds, Cat dealers have the experience and capabilities to keep you up and running.
• Integrated machine systems and technologies improve productivity for greater accuracy, allowing the machine to do more work per gallon/liter of fuel.
• Emissions reduction technologies reduce NOX + HC (hydrocarbon) emissions by 38% (g/kW-hr) as compared to the previous model.
• Reduced engine noise and quieter cabs mean lower operator and spectator sound levels.
• A variety of safety features help safeguard operators and others on the job site.
A 4.3 m (14 ft) moldboard is standard on the 14M, with a 4.9 m (16 ft) moldboard available as an option.
A variety of tools are available from Cat Work Tools, including cutting edges, graderbits and end bits, all designed for maximum service life and productivity.
A front mounted push plate/counterweight or front lift group are available. The front lift group can be combined with a front dozer blade for added versatility.
Made to penetrate tough material fast and rip thoroughly for easier movement with the moldboard. The ripper includes three shanks with the ability to add four more for additional versatility.
Data not available.