The 140M AWD Cat® Motor Grader is designed to help you get more work done in less time. Unprecedented operator comfort and ease of service help to maximize your return on investment.
Base Power (1st Gear) - Net | — |
Operating Weight - Typically Equipped | — |
Blade Width | — |
Base Power (1st Gear) - Net | — |
Engine Model | Cat C7 ACERT™ |
Bore | — |
Stroke | — |
Speed at Rated Power | 2,000 rpm |
Base Power (1st Gear) - Net - Metric | — |
Torque Rise - VHP Plus | 39% |
Emissions | U.S. EPA Tier 3/EU Stage IIIA equivalent |
Standard - Fan Speed - Minimum | 600 rpm |
Standard - Ambient Capability | — |
VHP Plus Range - Net - Metric | 136-174 kW (186-237 hp) |
Standard - Fan Speed - Maximum | 1,450 rpm |
VHP Plus Range - Net | 136-174 kW (183-233 hp) |
Maximum Torque - AWD On | — |
Note (4) | No engine derating required up to 3048 m (10,000 ft). |
High Ambient - Fan Speed - Minimum | 600 rpm |
Note (2) | Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan running at minimum speed, air cleaner, muffler and alternator. |
High Ambient - Fan Speed - Maximum | 1,650 rpm |
Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Note (3) | Power as declared per ISO 14396 – Rated Speed = 2,000 rpm – VHP Plus = 175 kW (234 hp) |
Displacement | — |
Number of Cylinders | 6 |
Derating Altitude | — |
High - Ambient Capability | — |
Front Axle - Wheel Lean - Left/Right | 18 degrees |
Drawbar - Width | — |
Front Frame Structure - Width | — |
Front Frame Structure - Height | — |
Front Axle - Total Oscillation per Side | 32 degrees |
Circle - Diameter | — |
Drawbar - Height | — |
Blade Width | — |
Arc Radius | — |
Throat Clearance | — |
Moldboard - Width | — |
Moldboard - Height | — |
Maximum Depth of Cut | — |
Blade Tip Range - Forward | 40 degrees |
Circle Centershift - Right | — |
Moldboard Sideshift - Right | — |
Blade Tip Range - Backward | 5 degrees |
Maximum Shoulder Reach Outside of Tires - Right | — |
Maximum Shoulder Reach Outside of Tires - Left | — |
Circle Centershift - Left | — |
Maximum Lift Above Ground | — |
Moldboard Sideshift - Left | — |
Operating Weight - Typically Equipped | — |
Gross Vehicle Weight - Base - Rear Axle | — |
Gross Vehicle Weight - Base - Front Axle | — |
Gross Vehicle Weight - Base - Total | — |
Gross Vehicle Weight - Typically Equipped - Front Axle | — |
Gross Vehicle Weight - Typically Equipped - Total | — |
Gross Vehicle Weight - Maximum - Front Axle | — |
Gross Vehicle Weight - Maximum - Total | — |
Gross Vehicle Weight - Typically Equipped - Rear Axle | — |
Note | Base operating weight calculated on standard machine configuration with 14.00R24 tire with multi-piece rim, full fuel tank, coolant, lubricants and operator. |
Gross Vehicle Weight - Maximum - Rear Axle | — |
Data not available.