Overview
The 140M Cat® Motor Grader is designed to help you get more work done in less time. Unprecedented operator comfort and ease of service help to maximize your return on investment.
Specifications
Units:
| Base Power (1st Gear) - Net | — |
| Operating Weight - Typically Equipped | — |
| Blade Width | — |
Benefits & Features
Performance
- Programmable Autoshift option simplifies operation by allowing transmission to be programmed to shift at optimal points to match application.
- Power Shift Countershaft Transmission matches to engine, maximizing power to the ground.
- Electronic Throttle Control helps improve productivity by providing best match of horsepower and torque for application demands.
Efficiency
- Aggressive blade angle, optimized moldboard curvature and large throat clearance allow material to roll more freely along blade, increasing efficiency.
- Hydraulic demand fan automatically adjusts speed according to cooling requirements resulting in more power to the ground and improved fuel efficiency.
- Engine idle shutdown timer is available to shut down engine after a set period of time saving fuel and helping reduce emissions.
Ease of Operation
- Selectable blade lift modes – Fine, Normal, or Coarse – allow you to choose the blade lift modulation mode that best fits your application or operating style.
- Joystick controls with electronically adjustable control pods reduce hand and arm movement by 78%, helping reduce operator fatigue.
- Left joystick controls steering, articulation, return-to-center, wheel lean, gear selection, left moldboard lift cylinder and float.
- Right joystick controls drawbar, circle and moldboard functions as well as electronic throttle control and manual differential lock/unlock.
- Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.
Specifications
Units:
| Base Power (1st Gear) - Net | — |
| Engine Model | Cat C7 ACERT™ |
| Bore | — |
| Stroke | — |
| Speed at Rated Power | 2,000 rpm |
| Standard - Ambient Capability | — |
| Standard - Fan Speed - Minimum | 600 rpm |
| Standard - Fan Speed - Maximum | 1,450 rpm |
| High Ambient - Fan Speed - Minimum | 600 rpm |
| VHP Plus Range - Net - Metric | 136-174 kW (186-237 hp) |
| High Ambient - Fan Speed - Maximum | 1,650 rpm |
| Maximum Torque - VHP Plus | — |
| Base Power (1st Gear) - Net - Metric | — |
| VHP Plus Range - Net | 136-174 kW (183-233 hp) |
| Torque Rise - VHP Plus | 39% |
| Note (3) | Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan running at minimum speed, air cleaner, muffler and alternator. |
| Note (5) | No engine derating required up to 3048 m (10,000 ft). |
| Note (4) | Power as declared per ISO 14396 – Rated Speed = 2,000 rpm – VHP Plus = 175 kW (234 hp) |
| Emissions | U.S. EPA Tier 3/EU Stage IIIA equivalent |
| Note (1) | Maximum torque (VHP Plus) measured at 1,000 rpm. |
| Note (2) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
| Displacement | — |
| Number of Cylinders | 6 |
| Derating Altitude | — |
| High - Ambient Capability | — |
| Circle - Diameter | — |
| Drawbar - Height | — |
| Drawbar - Width | — |
| Front Axle - Total Oscillation per Side | 32 degrees |
| Front Frame Structure - Height | — |
| Front Frame Structure - Width | — |
| Front Axle - Wheel Lean - Left/Right | 18 degrees |
| Blade Width | — |
| Arc Radius | — |
| Throat Clearance | — |
| Moldboard - Width | — |
| Moldboard - Height | — |
| Maximum Depth of Cut | — |
| Circle Centershift - Left | — |
| Maximum Shoulder Reach Outside of Tires - Right | — |
| Moldboard Sideshift - Right | — |
| Blade Tip Range - Forward | 40 degrees |
| Maximum Lift Above Ground | — |
| Moldboard Sideshift - Left | — |
| Blade Tip Range - Backward | 5 degrees |
| Maximum Shoulder Reach Outside of Tires - Left | — |
| Circle Centershift - Right | — |
| Operating Weight - Typically Equipped | — |
| Gross Vehicle Weight - Typically Equipped - Total | — |
| Gross Vehicle Weight - Maximum - Total | — |
| Gross Vehicle Weight - Typically Equipped - Rear Axle | — |
| Gross Vehicle Weight - Maximum - Rear Axle | — |
| Gross Vehicle Weight - Maximum - Front Axle | — |
| Gross Vehicle Weight - Base - Front Axle | — |
| Gross Vehicle Weight - Base - Total | — |
| Gross Vehicle Weight - Base - Rear Axle | — |
| Gross Vehicle Weight - Typically Equipped - Front Axle | — |
| Note | Base operating weight calculated on standard machine configuration with 14.00R24 tire with multi-piece rim, full fuel tank, coolant, lubricants and operator. |
Benefits & Features
Performance
- Programmable Autoshift option simplifies operation by allowing transmission to be programmed to shift at optimal points to match application.
- Power Shift Countershaft Transmission matches to engine, maximizing power to the ground.
- Electronic Throttle Control helps improve productivity by providing best match of horsepower and torque for application demands.
Efficiency
- Aggressive blade angle, optimized moldboard curvature and large throat clearance allow material to roll more freely along blade, increasing efficiency.
- Hydraulic demand fan automatically adjusts speed according to cooling requirements resulting in more power to the ground and improved fuel efficiency.
- Engine idle shutdown timer is available to shut down engine after a set period of time saving fuel and helping reduce emissions.
Ease of Operation
- Selectable blade lift modes – Fine, Normal, or Coarse – allow you to choose the blade lift modulation mode that best fits your application or operating style.
- Joystick controls with electronically adjustable control pods reduce hand and arm movement by 78%, helping reduce operator fatigue.
- Left joystick controls steering, articulation, return-to-center, wheel lean, gear selection, left moldboard lift cylinder and float.
- Right joystick controls drawbar, circle and moldboard functions as well as electronic throttle control and manual differential lock/unlock.
- Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.
Safety
- Angled cab doors, tapered engine enclosure and sloped rear window make it easy to see moldboard and tires, as well as behind the machine.
- Optional rear vision camera enhances sight to rear of machine.
Serviceability
- Sacrificial brass wear strips between blade mounting group and moldboard can be easily adjusted and replaced.
- Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.
Comfort
- Control pods can be adjusted electronically, making it easy to set to ideal operating position.
- Standard Cat Comfort Series suspension seat is fully adjustable.
- High capacity Heating, Ventilation and Air Conditioning (HVAC) system dehumidifies and pressurizes cab, sealing out dust and helping keep windows clear.
Technology
- Shuttle Shift allows smooth, fast direction shifts without requiring you to manipulate the throttle or inching pedal.
- Cat Product Link™ aids equipment management with remote monitoring capabilities.
- Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
- Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.
- Optional Cat GRADE with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
- Optional Cat AccuGrade™ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier and more efficiently.
- Optional Cat Advanced Control Joysticks allow you to control automated grading solutions efficiently and safely without removing your hands from the joysticks.
Data not available.