Engineered for optimum results, the CS423E features a Cat® 3054C engine rated at 62 kW (83 hp). The CS423E is sized to minimize operating costs and meet the needs of the majority of applications from site preparation to compacting sub-bases for parking lots or roadways. An optional padfoot shell kit increases versatility and a list of several other attachments provides you with exceptional performance in a wider range of applications.
Operating Weight - With Cab | — |
Compaction Width | — |
Gross Power | — |
Operating Weight - With Cab | — |
Operating Weight - With ROPS/FOPS | — |
Weight - Drum with Cab | — |
Weight - Drum with ROPS/FOPS | — |
Compaction Width | — |
Turning Radius - Inside Drum Edge | — |
Static Linear Load - With Cab | — |
Ground Clearance | — |
Static Linear Load - With ROPS/FOPS | — |
Travel Speed - Maximum | — |
Gross Power | — |
Engine Model | Cat 3054C |
Drum Width | — |
Overall Length | — |
Overall Width | — |
Drum Diameter | — |
Wheel Base | — |
Height - With ROPS/FOPS or Cab | — |
Centrifugal Force - Maximum | — |
Vibratory Frequency - Standard | — |
Nominal Amplitude - High | — |
Nominal Amplitude - Low | — |
Centrifugal Force - Minimum | — |
Variable Frequency Option Range | 23.3-31.9 Hz (1,400-1,914 vpm) |
Tires | 14.9 × 24 6-ply flotation |
Fuel Tank Capacity | — |
The pod-style weight housing is assembled and sealed at the factory to ensure cleanliness, longer bearing life and easier field exchange or service.
The dual amplitude allows the CS423E to works efficiently in a wider range of applications. Selection is controlled from the operator's station.
The CS423E has a vibratory frequence of 31.9 Hz (1,914 vpm) for maximum compaction results. Optional variable frequency control allows frequency to be better matched to varying job conditions.
Large heavy-duty bearings for the eccentric weight shaft allow higher frequency for greater force.
The 3 year/3,000 hour vibratory bearing lube service interval reduces maintenance.
The heavy-duty isolation mounts on the CS432E allow more force to be transmitted to the ground and less vibration to the drum yoke.
Positive amplitude selection is accomplished when the steel shot is repositioned inside the hollow eccentric weight. Direction of the weight shaft rotation determines amplitude level.
There is simplified control from the operator's station with a selection switch on the operator's console.
The eccentric weights are highly reliable since there is no change of the high-strength spherical steel shot wedging together. System reliability is superior to swinging mechanical weights and is also quieter during starts and stops.
No heavy weights to slap together and no metal fragments to contaminate the bearing lubrication system.
CS423E is naturally aspirated.
An adjustment-free direct injection fuel system provides individually metered high-pressure, direct injection of fuel for maximum efficiency.
A large engine oil cooler reduces oil deterioration and varnishing of internal components. Allows for 500 hour engine oil change intervals.
A low-mounted oil pump allows for quicker start-up lubrication.
The combination fuel filter and water separator offers superior protection for the fuel injection system.
The Cat® 3054C engine meets U.S. EPA Tier 2 and European EU Stage II emissions control standards worldwide.
The dual propel pumps provide separate, balanced hydraulic flow to the rear wheel axle and the drum drive motors. The dual propel pumps provide high gradeability and increased tractive effort in loose or poor underfoot conditions.
The limited slip differential provides balanced tractive effort and smooth torque transfer to both rear wheels.
Two speed ranges provide for versatile operation. Low speed range is for vibratory operation and maximum torque when climbing grades. High speed range moves the machine quickly over longer distances.
Flushing valves in each propel circuit help keep hydraulic oil cool and clean for maximum system efficiency.
The two propel pump system on the CS423E has dedicated pumps to drive the heavy-duty, high torque rear wheel and drum motors independently. Should the drum or wheels begin to spin, there is always hydraulic flow to the non-spinning motor, allowing continuous tractive effort. This feature is especially useful in loose underfoot conditions.
Controllability is another feature of dual propel pumps. The operator is able to stop, maintain machine position and change directions while on a grade.
The CS423E is designed to achieve high productivity on level to mild grades.
Visibility to tire edges and rear of the machine is exceptional. The sloped hood allows the operator to see obstacles measuring 1 meter (3'3") high located 1 meter (3'3") to the rear of the machine. Excellent visibility increases productivity when working near obstructions, or maneuvering around the job site.
The lockable engine hood opens quickly and easily with the use of gas struts to provide good access to the engine, cooling system and all service points.
Low sound levels for the operator and the ground crew are due to the engine hood and cooling air flow through the rear mounted radiator.
The steering console and operation gauges are infinitely adjustable within the tilt range to the desired position of the operator. Entire console tilts for simple entrance and exit.
The single lever control for propel and vibratory On/Off provides simple and low effort operation. A padded adjustable wrist rest helps reduce operator fatigue.
The comfortable and durable seat has adjustable fore/aft position, bottom cushion height, suspension stiffness and flip-up arm rests.
An isolated operator's station with heavy-duty rubber mounts reduces machine vibration transmitted to the operator.
The rubber floor mat helps further isolate the operator from machine vibration and noise.
The CS423E has a spacious and comfortable working environment with all controls, levers, switches and gauges positioned to maximize productivity.
From the platform there is unrestricted visibility to the drum and tire edge and to the side and rear of the machine.
The platform is enclosed by handrails and features foot rests for sure footing and support when working on a grade.
Standard equipment includes two front-facing and two rear-facing working lights, handrails with foot rests, a lockable vandalism guard and a rear view mirror.
Visual indicators allow easy check of radiator coolant, hydraulic oil tank level and air restriction indicator.
The operator's station tilts forward to allow convenient access to the hydraulic pumps.
The rear mounted cooling system provides easy access for cleaning. Hydraulic oil cooler tilts rearward for additional access to the radiator.
Sealed-for-life bearings in the articulation hitch never need to be greased.
500 Hour Engine Oil Change Interval
A 3 year/3,000 hour vibratory bearing lube service interval reduces maintenance.
Quick connect hydraulic test ports simplify system diagnostics.
Ecology drains provide an environmental method to drain fluids. They are included on the radiator, engine oil pan, hydraulic and fuel tank.
S•O•S (Scheduled Oil Sampling) ports allow for simple fluid collection of engine oil, engine coolant and hydraulic oil.
Secure hose routing with polyethylene routing blocks reduces rubbing and increase service life.
Nylon braided wrap and all-weather connectors ensure electrical system integrity. Electrical wiring is color-coded, numbered and labeled with component identifiers to simplify troubleshooting.
Maintenance-free Cat batteries are mounted in the rear of the machine and are protected by the engine hood. Cat batteries are specifically designed for maximum cranking power and protection against vibration.
The Cat Product Link System (PLS) ensures maximum uptime and minimum repair costs by simplifying tracking of equipment fleets. The system provides automatic machine location and hour updates. The system can be obtained through your local Cat dealer.
Data not available.