The Cat 725C2, with a 15 m3 (19.6 yd3) 24 tonnes (26.5 tons) capacity, offers proven reliability, durability, high productivity, superior operator comfort and lower operating costs. Updating the 725C to include all axle enclosed wet brakes and Automatic Traction Control makes the 725C2 the best option for our customers. Class leading levels of performance and operator comfort make for a productive machine all day long.
Engine Model | Cat C9.3 |
Rated Payload | — |
Heaped (SAE 2:1) | — |
Engine Model | Cat C9.3 |
Bore | — |
Stroke | — |
Displacement | — |
Peak Engine Torque Gross (SAE J1995) | — |
Net Power - SAE J1349 | — |
Net Power - ISO 14396 | — |
No Engine De-rating Below | — |
Peak Engine Torque Net (SAE J1349) | — |
Peak Engine Torque Speed | — |
Engine Model - U.S. EPA Tier 2/EU Stage II Equivalent | Cat® C9.3 |
Gross Power - SAE J1995 | — |
Emissions | The 725C2 meets Tier 2/Stage II equivalent emission standards. |
Note (1) | The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. |
Note (3) | Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions. |
Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
Rated Payload | — |
Heaped (SAE 2:1) | — |
Struck | — |
Tailgate Heaped SAE 2:1 | — |
Tailgate Struck | — |
Forward - 1 | — |
Forward - 2 | — |
Forward - 3 | — |
Forward - 4 | — |
Forward - 5 | — |
Forward - 6 | — |
Reverse - 1 | — |
Interior Cab | — |
Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT 98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |
Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Total - Empty | — |
Center Axle - Rated Load | — |
Front Axle - Empty | — |
Rear Axle - Loaded | — |
Center Axle - Empty | — |
Front Axle - Rated Load | — |
Total - Rated Load | — |
Center Axle - Loaded | — |
Rear Axle - Empty | — |
Rear Axle - Rated Load | — |
Front Axle - Loaded | — |
Total - Loaded | — |
Fuel Tank | — |
Cooling System | — |
Hydraulic System | — |
Engine Crankcase | — |
Transmission | — |
Final Drives/Differential | — |
Output Transfer Gear Box | — |
Raise Time | — |
Lower Time | — |
Lock to Lock | 4.75 seconds @ 60 rpm |
Brakes | ISO 3450 – 2011 |
Cab - FOPS | ISO 3449 Level II – 2005 |
Cab - ROPS | ISO 3471 – 2008 |
Steering | ISO 5010 – 2007 |
Type | High strength Brinell HB450 wear resistant steel |
Turning Dimensions - Clearance Radius | — |
Turning Dimensions - Steer Angle - Left/Right | 45° |
Note | Dimensions are for machines equipped with 23.5R25 tires. |
Turning Dimensions - SAE Turning Radius | — |
Turning Dimensions - Aisle Width | — |
Turning Dimensions - Inside Radius | — |
Data not available.