The Cat® 428F2 Backhoe Loader delivers performance, increased fuel efficiency, superior hydraulic system and an all new operator station.
Power - Net | — |
Operating Weight - Nominal | — |
Operating Weight - Maximum | — |
Power - Net | — |
Dimensions - Stroke | — |
Rated Power (Standard) - 2,200 rpm - Gross - ISO 14396 | — |
Dimensions - Bore | — |
Net Power - 2,200 rpm - 80/1269/EEC | — |
Engine | 3054C 68.5 kW Mechanical Turbo |
Note | *Meets Stage II/Tier 2 equivalent emission standards. |
Torque Rise - 1,400 rpm - Net | 38% |
Maximum Torque | — |
Dimensions - Displacement | — |
Net Power - 2,200 rpm - ISO 9249 | — |
Operating Weight - Nominal | — |
Operating Weight - Maximum | — |
Operating Weight | — |
Ride Control | — |
Auto-Shift Transmission | — |
Operating Weight - Estimated - C4.4 | — |
Air Conditioning | — |
4.3 m Extendible Stick - Excluding Front Counterweight | — |
MP Bucket (1.00 m3/1.30 yd3) - Without Fold-Over Forks | — |
Cab - ROPS/FOPS | — |
Operating Weight - ROPS Capacity - Maximum | — |
MP Bucket (1.00 m3/1.30 yd3) - With Fold-Over Forks | — |
Counterweights - Base | — |
Minimum Counterweight Recommendations - Extendible Stick: Loader Bucket - MP | — |
Counterweights - Maximum | — |
Minimum Counterweight Recommendations - Extendible Stick: Loader Bucket - GP | — |
Minimum Counterweight Recommendations - Standard Stick: Loader Bucket - MP | — |
Minimum Counterweight Recommendations - Standard Stick: Loader Bucket - GP | — |
Counterweights - Medium | — |
System Pressure - Loader | — |
Maximum Pump Capacity | — |
System Pressure - Backhoe | — |
Type | Closed Center |
Pump Type | Variable Flow, Axial Piston |
AWD Cylinder, One (1) Double Acting - Bore | — |
AWD Cylinder, One (1) Double Acting - Stroke | — |
Turning Circle (inner wheel not braked) - Outside Widest Loader Bucket | — |
AWD Cylinder, One (1) Double Acting - Rod Diameter | — |
Turning Circle (inner wheel not braked) - Outside Front Wheels | — |
AWD Cylinder, One (1) Double Acting - Axle Oscillation | — |
Type | Front Wheel |
Power Steering | Hydrostatic |
Rear Axle - Planetaries | — |
Engine Oil - With Filter | — |
Hydraulic System | — |
Rear Axle | — |
Front Axle (AWD) | — |
Hydraulic Tank | — |
Transmission - Power Shuttle - AWD | — |
Front Axle (AWD) - Planetaries | — |
Fuel Tank | — |
Cooling System - A/C | — |
Transmission - Auto-Shift - AWD | — |
Reverse - 2nd | — |
Forward - 4th | — |
Forward - 2nd | — |
Reverse - 1st | — |
Reverse - 3rd | — |
Reverse - 4th | — |
Forward - 3rd | — |
Forward - 1st | — |
Note | Travel speeds of two wheel drive backhoe loader at full throttle, when equipped with 16.9×28 rear tires. |
Reverse - 1st | — |
Forward - 6th | — |
Forward - 5th | — |
Forward - 2nd | — |
Reverse - 2nd | — |
Forward - 1st | — |
Forward - 3rd | — |
Forward - 4th | — |
Reverse - 3rd | — |
Note | Travel speeds of two wheel drive backhoe loader at full throttle, when equipped with 16.9×28 rear tires. |
Net Power - ISO 9249 | — |
Gross Power - ISO 14396 | — |
Gross Power - ISO 14396 | — |
Net Power - ISO 9249 | — |
Features (1) | Heavy-duty rear axle with self adjusting inboard brakes, differential lock and final drives. |
Features (5) | AWD front axle is pendulum mounted and permanently sealed and lubricated, requiring no daily maintenance. |
Features (4) | AWD has outer final drives for easy maintenance. |
Features (2) | AWD is engaged by front console panel switch or by brake pedal during all-wheel-braking operation. |
Features (6) | AWD also features double-acting steering cylinder with 52° steering angle for increased maneuverability. |
Features (3) | AWD can be engaged on the move, under load, in any gear, forward or reverse. |
Type | Fully enclosed boosted, hydraulic, multiple discs. |
Features (6) | Parking brake is mechanically applied through a hand lever located in the right side console. |
Features (4) | Dual foot-operated boosted brake pedals can be interlocked for roading. |
Features (3) | Self-adjusting. |
Features (2) | Completely enclosed and sealed. |
Features (1) | Inboard oil-immersed, hydraulically actuated multiple Kevlar discs on final drive input shaft. |
Features (5) | Parking/secondary brakes are independent of the service brake system. |
Features (7) | Meets ISO 3450:1996 requirements. |
Forward - 6th | — |
Forward - 3rd | — |
Forward - 5th | — |
Forward - 2nd | — |
Reverse - 2nd | — |
Reverse - 3rd | — |
Forward - 4th | — |
Reverse - 1st | — |
Note | Travel speeds of two wheel drive backhoe loader at full throttle, when equipped with 16.9×28 rear tires. |
Forward - 1st | — |
Digging Depth - SAE Maximum - E-Stick Extended - 4.26 m | — |
Digging Depth - SAE Maximum - E-Stick Retracted - 4.26 m | — |
Digging Depth - SAE Maximum - Standard Stick | — |
Maximum Torque | — |
Dimensions - Stroke | — |
Net Power - 2,200 rpm - 80/1269/EEC | — |
Dimensions - Bore | — |
Note | *Meets Stage II/Tier 2 equivalent emission standards. |
Net Power - 2,200 rpm - ISO 9249 | — |
Torque Rise - 1,400 rpm - Net | 31% |
Rated Power (Standard) - 2,200 rpm - Gross - ISO 14396 | — |
Dimensions - Displacement | — |
Engine | 3054C 74.5 kW Mechanical Turbo |
Rated Power (Standard) - 2,200 rpm - Gross - ISO 14396 | — |
Maximum Torque | — |
Dimensions - Displacement | — |
Torque Rise - 1,400 rpm - Net | 32% |
Net Power - 2,200 rpm - ISO 9249 | — |
Net Power - 2,200 rpm - 80/1269/EEC | — |
Dimensions - Bore | — |
Dimensions - Stroke | — |
Note | **Meets Stage IIIA/Tier 3 equivalent emission standards. |
Engine | C4.4 74.5 kW Mechanical Turbo Intercooled |
Dimensions - Bore | — |
Net Power - 2,200 rpm - ISO 9249 | — |
Engine | C4.4 70 kW Mechanical Turbo Intercooled |
Maximum Torque | — |
Torque Rise - 1,400 rpm - Net | 37% |
Rated Power (Standard) - 2,200 rpm - Gross - ISO 14396 | — |
Dimensions - Displacement | — |
Net Power - 2,200 rpm - 80/1269/EEC | — |
Dimensions - Stroke | — |
Note | **Meets Stage IIIA/Tier 3 equivalent emission standards. |
Rear Axle - Static | — |
Front Axle (AWD) - Dynamic | — |
Rear Axle - Dynamic | — |
Front Axle (AWD) - Static | — |
Net Power - ISO 9249 (2) | — |
Gross Power - ISO 14396 (1) | — |
Net Power - ISO 9249 (1) | — |
Gross Power - ISO 14396 (2) | — |
Inside Cab | — |
Outside Cab | — |
Note | *Stage IIIA with EN474 Prep. Pack. |
The 428F2 is fitted with mechanical controls providing low effort operation, with the ability to choose between ISO (Excavator) or SAE (Backhoe) control patterns. Providing easy and safe operation for operators of any experience or ability.
This optional six speed transmission will perfectly match itself to the application, carefully selecting the appropriate gear whether you're driving between job sites or using the loader function. Now the gear box has been tweaked, smoothing gear shifts and extending the top gear providing a more efficient and comfortable driving experience.
The lock-up torque converter provides a direct ratio between power pack and driveline when in the roading gears. This results in a 16% decrease in fuel consumption and an 11% increased average speed. The lock-up torque converter is an invaluable addition for those traveling between job sites.
Whether close-up truck loading or digging over obstacles, the excavator style boom tackles the toughest jobs with ease. Combining versatility with the powerful breakout forces, the controllability of the load sensing, flow-sharing hydraulic system and the 428F2 is capable of high levels of productivity with minimum effort. The boom is a narrow design, ensuring maximum visibility to the work tool and ground.
The 428F2 is available with an extendible stick that increases dig depth and reach capability increasing the machines versatility and utilization, reducing the amount of machine repositioning and therefore reducing site damage. A sliding inner section design helps to ensure the wear pads remain as dirt free as possible, extending adjustment and replacement intervals. Auxiliary lines, for operating hydraulic work tools, have been routed so that they are protected from damage when working in the narrowest of trenches.
The F2 Series Side Shift Frame has exterior locking clamps, with no disassembly needed when servicing. The frame is a solid design with E-Coat protection, this prevents material build up in the frame and reduces the risk of rust, increasing the life of the frame.
The 428F2 is equipped with Cat Cushion Swing, which enables very fast trenching by damping the boom oscillation during trenching cycles.
Provides a hydraulic service to allow the operator to easily position the backhoe across the full width of the Side Shift Frame. Ideal for use in areas with minimal space and utility applications such as gas, electrical, and telecoms.
General Purpose loader buckets are available as well as the hydraulically operated Multi Purpose bucket. These come in a range of sizes from 0.96 m3 to 1.3 m3.
Manual or hydraulic backhoe couplers make rear tool exchange quick, easy and safe. New Cat dual lock couplers have a self adjusting wedge design to ensure a tight fit. They also feature a safety lock which automatically engages.
Caterpillar understands that the easier a task is the more likely it is to be done. We have ensured that to service the Cat Backhoe Loader is as simple as it can be. All daily check points are grouped together and are easy to access. Sealed for life axles and driveshafts remove the need for operators to grease the time consuming and awkward areas below the machine.
The Extendible Stick (E-Stick) is designed to be self lubricating, to minimize the need for operator interaction. The stabilizers and E-Stick all have easily adjustable wear pads that require no disassembly. When wear pad adjustments are necessary, the adjustment bolts are easy to access, taking minutes to complete the adjustment.
All Cat filters are vertically mounted for spill free servicing and reduced oil contamination. These low micron filters remove microscopic particles from the oil, keeping the engine, transmission and hydraulic system running smoothly for years.
The hood opens to reveal the engine and a unique to Cat hinged cooling pack. The air conditioning pack lifts up and the radiator tilts forward with no tooling required, giving easy access for debris removal whether you are in the workshop or on a job site, keeping cooling performance to an optimum.
Your Cat dealer can offer a comprehensive range of CSA's which can be individually tailored to suit your finances and requirements. Dealers can offer a range of options from a full preventative maintenance with S∙O∙SSM package to a parts only CSA. Protect your valuable investment and know exactly what your monthly payments will be to help you run your business.
Have you explored the range of options available from your dealer to finance your machine? They can offer a selection of attractive packages tailored to suit your every requirement.
Your dealer can help you with your machine purchase decision, based on your requirements and help keep operating costs to a minimum. Is the machine you have in mind exactly the best for your job, or could there be a more suitable solution?
Speak to your dealer about additional support. They can advise you on operating techniques for your machines which will minimize wear and tear, maximize productivity, lower owning and operating costs and help you make the most of the fantastic features offered on the Cat Backhoe Loaders.
Data not available.