TL642D^Non-Current

Engine

Engine Model	Cat® C4.4 ACERT™
Gross Power - Basic	—100 HP75 kW

Weights

Operating Weight

—21693 lb9840 kg

Operating Specifications

Rated Load Capacity	—6500 lb2948 kg
Maximum Lift Height	—42 ft12.8 m
Maximum Forward Reach	—30 ft9.1 m
Top Travel Speed	—20 mile/h32 km/h
Drawbar Pull - Loaded	—19783 lbf88 kN
Capacity at Maximum Reach	—700 lb318 kg
Turning Radius - Over Tires	—12 ft3.7 m
Capacity at Maximum Height	—6000 lb2722 kg
Frame Leveling	10°

Tires

Standard	370/75-28 Air Duraforce
Optional (1)	370/75-28 Foam Duraforce
Optional (3)	13.00 × 24-12 PR Foam Filled
Optional (4)	13.00 × 24 Solid
Optional (2)	13.00 × 24-16 PR Air

Hydraulic System

Gear Pump	Single-section
Note	Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure	—3770 psi260 bar
Auxiliary Hydraulic Pressure	—3481 psi240 bar
Auxiliary Hydraulic Flow	—18 gal/min68 l/min

Service Refill Capacities

Fuel Tank	—38.3 gal (US)145 l
Hydraulic System	—40 gal (US)151.5 l

Boom Performance

Boom Up	—15.5 s15.5 s
Boom Down	—10.7 s10.7 s
Tele In	—11.8 s11.8 s
Tele Out	—17 s17 s

Braking System

Service Brakes	Inboard wet disc brakes on front and rear axles
Parking Brakes	Wet disc, spring applied hydraulic release on front axle

Axles

Type (1)	Trunnion mounted planetary 55 degree steer axles
Type (2)	High bias limited slip differential on front axle

Work Tools

Carriages - Standard Tilt	—50 in1270 mm
Carriages - Wide Rotate	—72 in1829 mm
Carriages - Wide Tilt	—72 in1829 mm
Hydraulic IT Coupler	Includes Auxiliary Electrics
Cubing Forks	[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Pallet Forks - Option 2	[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Carriages - Standard Rotate	—50 in1270 mm
Lumber Forks - Option 2	[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Pallet Forks - Option 1	[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Carriages - Side Shift	—48 in1220 mm
Carriages - Dual Fork Positioning	—50 in1270 mm
Carriages - Swing	100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Pallet Forks - Option 3	[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Lumber Forks - Option 1	[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)

Transmission Speeds

Forward	4 speed
Reverse	3 speed