TL943D^Non-Current

Engine

Engine Model	Cat­® C4.4 ACERT™
Gross Power - Basic	—110 HP82.1 kW

Weights

Operating Weight

—25419 lb11530 kg

Operating Specifications

Rated Load Capacity	—9000 lb4082 kg
Maximum Lift Height	—43 ft13100 mm
Maximum Forward Reach	—31 ft9.4 m
Top Travel Speed	—19 mile/h29.9 km/h
Capacity at Maximum Reach	—1200 lb544 kg
Capacity at Maximum Height	—7000 lb3175 kg
Drawbar Pull - Loaded	—21582 lbf96 kN
Turning Radius - Over Tires	—12 ft3.7 m
Frame Leveling	10°

Tires

Standard	370/75-28 Duraforce MT
Optional (1)	370/75-28 Foam Duraforce
Optional (4)	14 × 24-12 PR Foam
Optional (2)	13.00 × 24 Solid
Optional (3)	14 × 24-16 PR Air

Hydraulic System

Pump Type	Variable displacement load sensing axial piston pump
Note	Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure	—3770 psi260 bar
Auxiliary Hydraulic Pressure	—3481 psi240 bar
Auxiliary Hydraulic Flow	—25 gal/min94 l/min

Service Refill Capacities

Fuel Tank	—38 gal (US)145 l
Hydraulic System	—47 gal (US)177 l

Boom Performance

Boom Up	—10.7 s10.7 s
Boom Down	—9.6 s9.6 s
Tele In	—15.3 s15.3 s
Tele Out	—17.6 s17.6 s

Braking System

Parking Brakes	Wet disc, spring applied hydraulic release on front axle
Service Brakes	Inboard wet disc brakes on front and rear axles

Axles

Types (1)	Trunnion mounted planetary 55 degree steer axles.
Types (2)	High bias limited slip differential on front axle.

Work Tools

Lumber Forks - Option 2	[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Carriages - Swing	100°, 1829 mm, 4028 kg Capacity, 2268 kg Swung (100°, 72 in, 9,000 lb Capacity, 5,000 lb Swung)
Hydraulic IT Coupler	Includes Auxiliary Electrics
Carriages - Dual Fork Positioning	—50 in1270 mm
Carriages - Standard Tilt	—50 in1270 mm
Carriages - Side Shift	—48 in1220 mm
Carriages - Standard Rotate	—50 in1270 mm
Pallet Forks - Option 2	[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Carriages - Wide Tilt	—72 in1829 mm
Carriages - Wide Rotate	—72 in1829 mm
Cubing Forks	[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Pallet Forks - Option 1	[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Pallet Forks - Option 3	[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Lumber Forks - Option 1	[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)

Transmission Speeds

Reverse	3 speed
Forward	4 speed