TL1255D^Non-Current

Engine

Engine Model	Cat® C4.4 ACERT™*
Gross Power - Basic	—142.1 HP106 kW

Weights

Operating Weight

—34097 lb15466 kg

Operating Specifications

Rated Load Capacity	—12000 lb5443 kg
Maximum Lift Height	—54.6 ft16600 mm
Maximum Forward Reach	—42 ft12.8 m
Top Travel Speed	—20.5 mile/h33 km/h
Frame Leveling	10°
Maximum Lift Height (o/r Down)	—54.6 ft16.6 m
Capacity at Maximum Height (o/r Down)	—5000 lb2268 kg
Turning Radius - Over Tires	—14 ft4.3 m
Capacity at Maximum Reach (o/r Down)	—3500 lb1587 kg
Drawbar Pull - Loaded	—25605 lb113.9 kN

Tires

Standard	400/75-28 Duraforce
Optional	400/75-28 Foam Filled; 14.00-24 Solid; 17.5 × 25 16PR; 17.5 × 25 12PR Foam Filled

Hydraulic System

Pump Type	Variable displacement load sensing axial piston pump
System Operating Pressure	—3771 psi260 bar
Auxiliary Hydraulic Pressure	—3307 psi228 bar
Auxiliary Hydraulic Flow	—25 gal/min95 l/min
Note	Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.

Service Refill Capacities

Fuel Tank	—38 gal (US)145 l
Hydraulic System	—50 gal (US)189 l

Boom Performance

Boom Up	—16.7 s16.7 s
Boom Down	—14.4 s14.4 s
Tele In	—16.3 s16.3 s
Tele Out	—18.5 s18.5 s

Braking System

Service Brakes	Inboard wet disc brakes on front and rear axles
Parking Brakes	Wet disc, spring applied hydraulic release on front axle

Axles

Types (1)	Trunnion mounted planetary 55 degree steer axles.
Types (2)	High bias limited slip differential on front axle.

Work Tools

Carriages - Standard Rotate	—50 in1270 mm
Carriages - Wide Tilt	—72 in1829 mm
Fork Extensions*	—90 in2300 mm
Pallet Forks - Option 2	[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Carriages - Dual Positioning	—50 in1270 mm
Carriages - Standard Tilt	—50 in1270 mm
Carriages - Side Shift	—48 in1220 mm
Carriages - Wide Rotate	—72 in1829 mm
Lumber Forks	[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Carriages - Swing (1)	100°, 1829 mm, 4536 kg Capacity, 2268 kg Swung (100°, 72 in, 10,000 lb Capacity, 5,000 lb Swung)
Hydraulic IT Coupler	Includes Auxiliary Electrics
Note	*For use with 1829 mm (72 in) Lumber Forks.
Carriages - Swing (2)	180°, 1824 mm, 5443 kg (180°, 72 in, 12,000 lb)
Cubing Forks	[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Pallet Forks - Option 1	[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)

Transmission Speeds

Forward	4 speed
Reverse	3 speed