TL1055D^Non-Current

Engine

Engine Model	Cat® C4.4 ACERT™*
Gross Power - Basic	—142.1 HP106 kW

Weights

Operating Weight

—31614 lb14340 kg

Operating Specifications

Rated Load Capacity	—10000 lb4536 kg
Maximum Forward Reach	—42 ft12.8 m
Top Travel Speed	—20.5 mile/h33 km/h
Capacity at Maximum Reach (o/r Down)	—2500 lb1134 kg
Maximum Lift Height (o/r Down)	—54.9 ft16.7 m
Capacity at Maximum Height (o/r Down)	—5000 lb2268 kg
Frame Leveling	10°
Drawbar Pull - Loaded	—25605 lbf113.9 kN
Turning Radius - Over Tires	—14.1 ft4.3 m

Tires

Standard	400/75-28 Duraforce
Optional	400/75-28 Foam Filled; 14.00-24 Solid; 14.00 × 24 16PR; 14.00 × 24 12PR Foam Filled

Hydraulic System

Pump Type	Variable displacement load sensing axial piston pump
Auxiliary Hydraulic Flow	—25 gal/min95 l/min
Note	Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
Auxiliary Hydraulic Pressure	—3307 psi228 bar
System Operating Pressure	—3771 psi260 bar

Service Refill Capacities

Fuel Tank	—38 gal (US)145 l
Hydraulic System	—49 gal (US)185 l

Boom Performance

Boom Up	—15 s15 s
Boom Down	—13 s13 s
Tele In	—16.3 s16.3 s
Tele Out	—18.5 s18.5 s

Braking System

Service Brakes	Inboard wet disc brakes on front and rear axles
Parking Brakes	Wet disc, spring applied hydraulic release on front axle

Axles

Types (1)	Trunnion mounted planetary 55 degree steer axles.
Types (2)	High bias limited slip differential on front axle.

Work Tools

Pallet Forks - Option 2	[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Carriages - Swing	100°, 1829 mm, 4536 kg Capacity, 2268 kg Swung (100°, 72 in, 10,000 lb Capacity, 5,000 lb Swung)
Carriages - Standard Rotate	—50 in1270 mm
Carriages - Standard Tilt	—50 in1270 mm
Fork Extensions*	—90 in2300 mm
Carriages - Wide Tilt	—72 in1829 mm
Lumber Forks - Option 1	[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Carriages - Side Shift	—48 in1220 mm
Carriages - Wide Rotate	—72 in1829 mm
Cubing Forks	[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Lumber Forks - Option 2	[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Note	*For use with 1829 mm (72 in) Lumber Forks.
Carriages - Dual Positioning	—50 in1270 mm
Hydraulic IT Coupler	Includes Auxiliary Electrics
Pallet Forks - Option 1	[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)

Transmission Speeds

Reverse	3 speed
Forward	4 speed