The new H2 Series Compact Wheel Loaders maintain the Cat strengths while boasting a whole new range of features and benefits. In short, a machine that can be trusted to perform.
Operating Weight | — |
Rated Bucket Capacity | — |
Net Power | — |
Net Power | — |
Model | Cat� C3.3B DIT |
Net Power - ISO 9249 | — |
Stroke | — |
Net Power - 80/1269/EEC | — |
Gross Power | — |
Displacement | — |
Bore | — |
Description | Cat C3.3B engine, 4 cylinder, turbocharged, direct injection |
Operating Weight | — |
Cooling System | — |
Fuel Tank | — |
Hydraulic System | — |
Engine Oil | — |
Rated Bucket Capacity | — |
Bucket Capacity | — |
Hydraulic Cycle Time - Lift | 5 secs |
Hydraulic Cycle Time - Dump | 2 secs |
3rd Auxiliary Flow - Standard | — |
3rd Auxiliary Flow - High Flow | — |
Main Relief | — |
Hydraulic Cycle Time - Rackback | 2.5 secs |
Hydraulic Cycle Time - Lower | 4 secs |
High Speed | — |
Speed 1 | — |
Speed 2 | — |
Standards | Cat cab, Rollover Protective Structure (ROPS) and Falling Objects Protective Structure (FOPS) |
Exterior Sound | For European Union compliant machine configurations, machine is measured according to test procedures specified in 2000/14/EC. |
Interior Sound | Dynamic operator sound pressure level is 75 dB(A) when �ISO 6396:1992� is used to measure the value for an enclosed cab. |
Bucket Weight - Vertical Pin BOCE | — |
Maximum Material Density - Horizontal Pin Coupler | 1706 kg/m3 |
Maximum Material Density - SSL Coupler | 1584 kg/m3 |
Bucket Width | — |
Rated Capacity | — |
Dump Height - Horizontal Pin Coupler | — |
Bucket Weight - Horizontal Pin BOCE | — |
Dump Height - SSL Coupler | — |
Bucket Width | — |
Bucket Weight - Vertical Pin BOCE | — |
Rated Capacity | — |
Dump Height - SSL Coupler | — |
Bucket Weight - Horizontal Pin BOCE | — |
Maximum Material Density - Horizontal Pin Coupler | 2202 kg/m3 |
Maximum Material Density - SSL Coupler | 2149 kg/m3 |
Dump Height - Horizontal Pin Coupler | — |
Bucket Weight - Horizontal Pin BOCE | — |
Maximum Material Density - SSL Coupler | 1218 kg/m3 |
Dump Height - Horizontal Pin Coupler | — |
Rated Capacity | — |
Dump Height - SSL Coupler | — |
Maximum Material Density - Horizontal Pin Coupler | 1310 kg/m3 |
Bucket Weight - Vertical Pin BOCE | — |
Bucket Width | — |
Rated Operating Load at Full Turn - Forks (Firm and Level Ground, 1.25 Stability and 500 mm [20 in] Load Center, Transport 100 mm [4 in] Above Ground) | — |
Rated Operating Load at Full Turn - Bucket (ISO 14397-1:2007) | — |
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 1.25 Stability and 500 mm [20 in] Load Center) | — |
Rated Bucket Capacity (ISO 7546:1983) | — |
Breakout Force - Bucket (ISO 14397-2:2007) | — |
Tire Size | 405/70 R18 |
Rack Back - Transport Position | — |
Straight Tipping Load - Bucket (ISO 14397-1:2007) | — |
Operating Weight - ISO 6016:1998 | — |
Full Turn Static Tipping Load - Bucket - ISO 14397-1:2007 | — |
Breakout Force - Bucket (ISO 14397-2:2007) | — |
Rated Bucket Capacity (ISO 7546:1983) | — |
Tire Size | 405/70 R18 |
Rated Operating Load at Full Turn - Forks (Firm and Level Ground, 1.25 Stability and 500 mm [20 in] Load Center, Transport 100 mm [4 in] Above Ground) | — |
Rated Operating Load at Full Turn - Bucket (ISO 14397-1:2007) | — |
Rack Back - Transport Position | — |
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 1.25 Stability and 500 mm [20 in] Load Center) | — |
Operating Weight - ISO 6016:1998 | — |
Straight Tipping Load - Bucket (ISO 14397-1:2007) | — |
Full Turn Static Tipping Load - Bucket - ISO 14397-1:2007 | — |
Cabin Light | Standard |
Lockable Storage Box | Standard |
Heater | Standard |
Left Window - Fixed | Standard |
Right Window - Sliding | Standard |
External Knock Back Mirrors | Standard |
Cat Radio/CD/MP3/WMA/AUX | Optional |
Coat Hook | Standard |
Vinyl Suspension Seat | Standard |
Rear Blind | Optional |
Sun Visor | Standard |
Radio-Ready Kit (Wiring, Speaker, Aerial and Grilles) | Standard |
Heated Rear Window | Standard |
Fixed Steering Column | Standard |
Heater and Air Conditioning | Optional |
Cloth Suspension Seat, Arm Rest | Standard |
Left Window - Fixed | Standard |
Rear Blind | Optional |
Radio-Ready Kit (Wiring, Speaker, Aerial and Grilles) | Standard |
Lockable Storage Box | Standard |
Heater and Air Conditioning | Optional |
Heater | Standard |
External Knock Back Mirrors | Standard |
Heated Rear Window | Standard |
Cat Radio/CD/MP3/WMA/AUX | Optional |
Right Window - Sliding | Standard |
Coat Hook | Standard |
Left Window - Sliding | Standard |
Cabin Light | Standard |
Sun Visor | Standard |
Fixed Steering Column | Standard |
Lockable Storage Box | Standard |
Cabin Light | Standard |
Heater | Standard |
Two Access Doors | Standard |
Adjustable Steering Column | Standard |
Heated Rear Window | Standard |
Radio-Ready Kit (Wiring, Speaker, Aerial and Grilles) | Standard |
Reach at Ground Level | — |
Dig Depth | — |
Tire Gauge | — |
Maximum Dump Height | — |
Dump Angle at Maximum Height - Degrees | — |
Machine Width | — |
Maximum Fork Height | — |
Fork Height at Maximum Reach | — |
Fork Reach at Maximum Height | — |
Fork Depth Below Ground | — |
Width - Over Bucket | — |
Maximum Reach | — |
Overall Length - With Forks | — |
Turning Radius - Inside Tire | — |
Overall Length - With Bucket | — |
Departure Angle - Degrees | — |
Hinge Pin at Maximum Height | — |
Turning Radius - Over Bucket | — |
Ground Clearance | — |
Cab Height | — |
Reach at Maximum Dump Height | — |
Articulation Angle - Degrees | — |
Wheel Base | — |
Load Over Height | — |
Maximum Dump Height | — |
Dump Angle at Maximum Height - Degrees | — |
Overall Length - With Bucket | — |
Ground Clearance | — |
Machine Width | — |
Fork Reach at Maximum Height | — |
Turning Radius - Over Bucket | — |
Departure Angle - Degrees | — |
Maximum Fork Height | — |
Cab Height | — |
Load Over Height | — |
Hinge Pin at Maximum Height | — |
Maximum Reach | — |
Width - Over Bucket | — |
Articulation Angle - Degrees | — |
Tire Gauge | — |
Wheel Base | — |
Dig Depth | — |
Overall Length - With Forks | — |
Fork Depth Above Ground | — |
Reach at Ground Level | — |
Turning Radius - Inside Tire | — |
Reach at Maximum Dump Height | — |
Fork Height at Maximum Reach | — |
Visibility to the worksite has been kept to an optimum with two fully glazed doors, front low-level glazing, excellent rear visibility and a clear view to the work tool through the loader arms.
Two armrests and an adjustable wrist rest as standard, intuitively laid out controls, low effort joysticks and steering are some of the features which give maximum operator comfort.
All models feature a red backlit machine status cluster, with speedometer, located conveniently within the operator's line of sight.
Contains Forward-Neutral-Reverse switch, travel speed selector, 3rd auxiliary hydraulics, diff‑lock and constant flow controls.
With a variety of options it is easy to customize the cab to meet your requirements. A choice of three cab trims and a canopy are available.
The Cat hydrostatic driveline has two speed options, 20 km/h or 35 km/h. The 35 km/h speeder includes secondary steering. Both options feature smooth inching as standard, with optional travel speed, rimpull control and hand throttle (transmission control upgrade).
The 35 km/h speeder version has hydraulically boosted oil immersed disc brakes fitted to both ends of the front axle. The 20 km/h version has a hydraulically actuated dry disc brake, both offering smooth and effective braking. The braking is applied through all four wheels.
The Cat Compact Wheel Loaders offer 100% diff-lock, in both axles as an option throughout the range. Diff-lock can be easily engaged on the move to allow travel over poor underfoot conditions.
Oscillating chassis helps assure four wheel ground contact for optimum traction and stability.
The ride control system further enhances the already smooth road handling of the machine, resulting in increased operator comfort and higher productivity. It is suited for extreme applications where operators need to maintain bucket load material and have a smooth ride. There are three modes available: auto, on and off. Recommended for use with the 35 km/h speeder option.
This quick coupler will pick up the new range of Cat Compact Wheel Loader work tools. The coupler along with the profiled loader arms have been designed to give maximum visibility to the work tool. A simple joystick function allows for easy engagement and disengagement of the locking pins.
The universal skid steer loader coupler allows the use of many Cat Skid Steer Loader work tools. Using either the standard or high flow hydraulic option, this coupler allows the H2 Series Compact Wheel Loaders to integrate into a skid steer loader fleet.
Cat Compact Wheel Loaders make use of the high performance Z-bar loader design which has been optimized for strength, visibility and versatile attachment usage. The Z-bar linkage gives the operator a clear view to the work tool and excellent dump clearance while maintaining good cycle times and parallel lift.
To maximize machine utilization, Cat work tools are designed to get the best out of the machine and deliver excellent value through high productivity and long life. The new H2 Series Compact Wheel Loaders can now pick up even more work tools with the addition of a choice of couplers.
The Cat Compact Wheel Loader offers a comprehensive range of buckets to suit any environment and specific customer needs. The buckets have been designed and engineered to endure the high breakout forces of the H2 Series Compact Wheel Loader. The Cat fork carriage has been designed to increase visibility to the forks, allowing the operator to work much more efficiently and safely, without compromising durability. Various fork tine lengths are available.
The auxiliary lines and connectors are fitted as standard, meaning the Cat Compact Wheel Loader comes ready to work. For a complete list of available work tools please consult your local Cat dealer.
Cat Compact Wheel Loaders undergo an extensive 24-Stage ‘E-Coat' process. Zinc based electroplated undercoat and polyurethane topcoat provides unmatched corrosion resistant properties.
The H2 Series Compact Wheel Loaders are fitted with heavy duty axles, with outboard planetary reduction gears.
With heavy-duty braided wiring, Cat Compact Wheel Loaders offer great electrical durability. The water resistant sealed connectors prevent dust and moisture interfering with the electrics. Multicolored and numbered wiring is used for easy component identification.
Durability has been designed into the machine by offering protection to features such as the rear lights, loader arm and coupler greasing points.
High quality solid plastics, well-fitted rubber moldings make up the foundation of the H2 Series cab. Robust IP67 standard switches are used throughout, ensuring long life of components.
Data not available.