740 EJ

740 EJ - 2017, Tier 4 Final, Stage IV, HRC

Overview

The Cat 740 EJ with a 23 m³ (30.1 yd³) 38 tonnes (42 tons) capacity brings a new level of operator comfort and features to the market in addition to the durability, high productivity and lower operating costs Cat Articulated Trucks are known for. The all-new operator cabin is a leap into the next generation for Articulated Trucks, providing our operators the best place to help build the future.

Specifications

Units: 
Engine Model Cat® C18
Rated Payload
Heaped (SAE 2:1)
See more

Benefits & Features

MAXIMIZE PERFORMANCE

AUTOMATIC CONTROLS

HEAVY DUTY CONSTRUCTION

  December 5, 2023

Specifications

Units: 
Engine
Engine Model Cat® C18
Bore
Stroke
Displacement
Net Power - SAE J1349
Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 Final Cat C18
Net Power - ISO 14396
Gross Power - SAE J1995
Peak Engine Torque Net (SAE J1349)
No Engine De-rating Required Below
Note (4) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Peak Engine Torque Gross (SAE J1995)
Note (1) The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Peak Engine Torque Speed
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (3) Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Emissions The 740 EJ meets Tier 4 Final and Stage V emission standards.
Weights
Rated Payload
Body Capacities
Heaped (SAE 2:1)
Struck
Transmission
Forward - 1
Forward - 2
Forward - 3
Forward - 4
Forward - 5
Forward - 6
Forward - 7
Forward - 8
Reverse - 1
Reverse - 2
Forward - 9
Sound Levels
Interior Cab
Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Operating Weights
Front Axle - Empty
Front Axle - Loaded
Center Axle - Loaded
Center Axle - Empty
Total - Empty
Rear Axle - Rated Load
Rear Axle - Empty
Front Axle - Rated Load
Center Axle - Rated Load
Total - Loaded
Total - Rated Load
Rear Axle - Loaded
Body Plate
Type High Strength Brinell HB450 Wear Resistant Steel
Chute
Front
Side
Base
Service Refill Capacities
Fuel Tank
Cooling System
Engine Crankcase
Steering/Hoist Hydraulic System
Transmission - OTG
DEF Tank
Axles - Each
Final Drive - Each
Brake Cooling Tank
Steering
Lock to Lock 4.8 seconds @ 60 rpm
Standards
Brakes ISO 3450 – 2011
Cab - FOPS ISO 3449 Level II – 2005
Cab - ROPS ISO 3471 – 2008
Steering ISO 5010 – 2007
Turning Circle
Note Dimensions are for machines equipped with 29.5R25 tires.
Turning Dimensions - Aisle Width
Turning Dimensions - Inside Radius
Turning Dimensions - Clearance Radius
Turning Dimensions - SAE Turning Radius
Turning Dimensions - Steer Angle - Left/Right 45 deg
Blade Eject/Retract
Retract (manual)
Eject (manual)
Eject (automatic)
Retract (automatic)
Optimal Loader/Truck Pass Matching
Note An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Wheel Loader: 972 - Passes 4–5
Wheel Loader: 982 - Passes 4
Hydraulic Excavator: 374 - Passes 5
Hydraulic Excavator: 390 - Passes 4
Wheel Loader: 980 - Passes 4–5

Benefits & Features

MAXIMIZE PERFORMANCE

    • Every Tier 4 Final/Stage IV and EU Stage V Cat engine is equipped with a combination of proven electronic, fuel, air and aftertreatment components.
    • Maximized uptime and reduced cost with world-class support from the Cat dealer network.
    • Minimized impact of emission systems: designed to be transparent to the operator without requiring interaction.
    • Delivering better fuel economy with minimized maintenance costs while providing the same great power and response.
    • Advanced MEUI-C injector platforms deliver increased injection pressures and more precise fuel rates. These durable injectors enhance responsiveness while controlling soot.
    • All Cat engines feature innovative air-management systems that optimize airflow and enhance power, efficiency and reliability.
    • The Cat NOx Reduction System (NRS) captures and cools a small quantity of exhaust gas, then routes it back into the combustion chamber where it drives down combustion temperatures and reduces NOx emissions.
    • Cat engines equipped with a Selective Catalytic Reduction (SCR) system inject Diesel Exhaust Fluid (DEF) into the exhaust to reduce NOx emissions. DEF is a precisely mixed solution of 32.5 percent high purity chemical grade urea and 67.5 percent de-ionized water.

AUTOMATIC CONTROLS

    • Advanced Automatic Traction Control (AATC) proactively applies inter- and cross-axle differential locks ‘on-the-go.’ Operators are freed from this function to concentrate on driving/loading/dumping. Sensors monitor the machine and wheel speeds, enabling instant response in high rolling resistance conditions. Operation is seamless and smooth, eliminating wheel slip for maximum traction and productivity.
    • Clutches are automatically disengaged when ground conditions allow, maximizing efficiency when steering or when on uneven ground.
    • AATC reduces tire and driveline abuse, eliminating lost machine efficiencies caused by improper manual operation of the differential clutches and reducing the tire wear.
    • Automatic Retarder Control (ARC) automates the retarder for the operator. Like AATC, a number of machine operating aspects are monitored. If required, the engine compression brake is engaged automatically to control machine speed when descending a grade. The system can help towards eliminating engine overspeed, improving safe machine operation and reducing cycle times, yet still having the flexibility of manual control if needed.
    • Ejecting material from the dump body can be automated with the new Assisted Ejecting Control. Flick the new load eject switch and the machine will apply the service brakes, switch the transmission to neutral and push the material out at the required engine RPM. Retracting the blade is done the same way, flick the switch and the machine will fully retract the blade.

HEAVY DUTY CONSTRUCTION

    • All three axles promote stability using oscillating a-frames with lateral tie rods. Operate at productive speeds with confidence while virtually eliminating impact loads on truck components.
    • The front suspension oscillates controlled by large-bore, low-pressure cylinders to assist in a smooth ride. An A-frame with lateral tie rod controls sideways movement and aids stability.
    • The rear suspension features a walking beam and long-life suspension mounts optimizing ride and load retention.
    • New fully enclosed wet disc brake systems inside of axles keeps contaminants out extending machine life and ensuring uptime.
    • Hill assist reduces potential 'roll-back' on grades. If an operator stops the machine on a grade, when taking his foot off the service brake pedal the machine will automatically hold the service brakes on for a number of seconds to prevent the machine from rolling backwards.
    • Waiting brake applies the service brakes when neutral gear is selected, allowing quick and easy control of the machine at the load or dump area.

OPERATOR COMFORT AND CONTROL

    • Spacious cab delivers comfort all shift long and is 7dB quieter than prior model.
    • Unique combination eject/transmission lever is intuitive and enhances cycle times with fewer control movements
    • Trainer/passenger seat is fully padded with wide, retractable seat belt for security and comfort.
    • New large side storage box is heated/cooled by the HVAC system.
    • Air-suspension seat offers greater comfort, with a greater range of adjustments. Fore/aft isolation dramatically reduces vibrations and jolts. Every operator will find a adjustments to ensure comfort and control all shift long.
    • Standard cooling/heating system ensures comfort in all conditions.
    • Optional four-point seat belt is available to help operator stay in position and comfortable in rugged terrain.
    • Integrated, wrap-around dash means all gauges and controls are easy to monitor and access. Automotive feel with Caterpillar's renowned industrial strength.
    • The updated touch screen dash mounted display allows the operator to monitor and adjust various levels of machine performance and condition, as well as machine warning categories. These include configuration settings, operator and machine totals, service information, various machine status parameters, machine payload information (when fitted), stability assist, and the video feed from the rearview camera.
    • Optional Bluetooth™ entertainment system allows operator to stay in hands-free phone contact.

BUILT TO PERFORM

    • The 740 EJ can eject and spread the material while moving, reducing additional spreading and dozing equipment. "On-the-go" ejecting results in faster cycle times and reduced power train loads.
    • Ejecting the load without raising the body increases stability, allowing unloading on inclines, side slopes and in very soft underfoot conditions especially on landfill sites.
    • The truck can eject in areas with reduced overhead clearance, such as around overhead lines or in tunneling and underground operations.
    • The body design eliminates material sticking to the body, which increases productivity, improves fuel efficiency and lowers cost per ton.
    • Reinforced body is made from thick high-yield, heat-treated Brinell hardened steel (Brinell 400 on the base and sides) that provides exceptional durability. Ejector top rails are made from high-strength alloy steel. For optimum durability and wear life, the ejector body is designed to work in applications where the material consists of rocks smaller than 152 mm (6 in) in diameter.
    • The ejector blade is made from high-strength steel and uses technology similar to that proven in Cat wheel tractor-scrapers.
    • A four-stage, high-speed, double-acting ejector cylinder is specifically designed for horizontal mounting and smooth load ejection.
    • Box section front frame absorb is stiff to handle torque loads. Frame design decreases stress at the hitch and optimizes suspension geometry.
    • Rear frame features twin-box construction minimizing stress points and enhancing service life.
    • The articulating hitch provides the truck with steering articulation, and the oscillation ensures all-wheel ground contact in rough terrain.
    • Field proven two-piece hitch construction features a durable cast steel head bolted to a hard wearing forged steel tube.
    • The 740 EJ body has a large target area to provide consistently high load-carrying capacity. Eject blade and body design aid in clean material discharge, maximizing production and avoiding carry-back.
    • The output transfer gear distributes drive to the tractor and trailer and includes a wet clutch differential lock for optimum traction in poor underfoot conditions.
    • The full power hydraulic brake system actuates enclosed, oil-immersed, multi-disc, multi-plate brakes with independent front and rear circuits and accumulators. This dual-circuit, all wheel braking system provides the braking performance required to support maximum productivity.
    • The parking brake is located on the center axle in an elevated position, it is spring applied and hydraulically released.

TECHNOLOGY THAT GETS WORK DONE

    • Cat Product Link wirelessly connect you to your equipment, giving you valuable insight into how your machine or fleet is performing. The system tracks location, hours, fuel usage, productivity, idle time, and diagnostic codes through the online VisionLink user interface so you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower costs.
    • Cat Production Measurement brings payload weighing to the cab to help optimize job site efficiency and productivity. Operators can view real-time load weights on the integrated display and know precisely when target is achieved, while cab-mounted external payload lights on all four corners signal the loader operator when to stop, reducing the risk of machine overloading. Operators can track daily productivity from the cab, with quick access to truck payload weights, loads and cycle counts, and daily totals; or remotely via LINK technologies.
    • Cat Detect with Stability Assist warns the operator if machine is approaching a pre-set angle during operation; when driving and tipping. If using the assisted hoist, the machine will stop hoisting the body and give an audible and visual warning. The system monitors angles of tractor, trailer and grade independently. This increases operator awareness of machine stability during operation. All tractor and/or trailer rollover events are logged and reported via VisionLink.

BECAUSE UPTIME COUNTS

    • Caterpillar design, manufacturing and customer service help ensure peak performance and uptime.
    • Long service intervals keep your machine operating.
    • Lubrication points are grouped near the hitch for fast, easy routine maintenance.
    • Universal joints are sealed and lubed for long life.
    • Optional autolube system saves time and includes alerts via Product Link for low levels and fault codes.
    • Radiator package is located behind the cab for protection and uses extended-life coolant to stretch change intervals.
    • Electrical service center is located inside the cab and provides a power port, diagnostic connector and Cat Data Link connector for use with Electronic Technician (ET) software-equipped laptop computer.
    • Easy access to transmission, drive shafts, hydraulic pumps and electrical and hydraulic interfaces provided with tilt-to-side cab and access panel.
    • Service points are conveniently located on the left side of the engine, under the electrically raised hood.
    • Complete customer support is the goal of your Cat dealership. From counsel of product selection, operating costs, operation, maintenance all the way to help with decisions on when and whether to replace or rebuild, your dealer is with you all the way.

MORE SUSTAINABLE FUTURE

    • Caterpillar designs and functions with great concern for the environment.
    • Cat C18 engine incorporates the Cat Clean Emission Module (CEM) to meet Tier 4 Final/Stage IV emission standards. The system uses both Ultra-low-sulfur diesel (ULSD) fuel or up to B20 bio-diesel blended with ULSD.
    • All Cat C Series Articulated Trucks are designed for long lifecycles with machines using reman components and machine rebuilds to maximize use of every part, minimizing waste.
    • Volume of both hydraulic and engine oil systems has be reduced meaning less waste when oils are replaced.

BUILT-IN SAFETY FEATURES

    • Seat belt in use indicator (four-point seat belt available as an option)
    • Operator presence detection (prevents gear engagement when operator is not seated)
    • Additional mirror for front of machine visibility
    • Cab mounted, wide angled, folding mirrors
    • Heated mirrors (optional)
    • Body raised visual indicator
    • Cab integral Roll Over Protection System (ROPS) and Falling Object Protection System (FOPS)
    • Electro-hydraulic secondary steering system automatically activates in forward/reverse or when stationary if low pressure is sensed and can be manually selected for machine recovery purposes
    • Extensive handrails
    • External electrical system disconnect switch for easy access from outside of the machine
    • Fire extinguisher in-cab mounting point
    • Fully raised body locking pin
    • Ground level external engine fuel cut-off switch provides easy access outside of the machine
    • In-cab emergency brake switch (tertiary)
    • Internal and external grab handles
    • LED-flashing beacon (optional)
    • Maximum speed limiter
    • Multiple camera compatible
    • New access lights
    • Rearview camera system is fitted as standard
    • Reversing indicator
    • Slip resistant walkways – punched steel plate
    • The parking brake functions are spring applied and hydraulic released
    • Cat Detect with Stability Assist

Standard Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • OPERATOR ENVIRONMENT
    • Air conditioning with R134A refrigerant
    • Windshield wiper and washer, two speed, intermittent (front)
    • Windows opening side, tinted
    • Adjustable air vents
    • Two seat belts, operator's retractable
    • Windshield wiper and washer, two speed (rear)
    • Storage:<br>– Cup holder<br>– Flask receptacle<br>– Under seat storage<br>– Door pocket<br>– Behind seat storage<br>– Coat hook
    • Mirrors: Extensive arrangement for improved visibility
    • Tilt and telescopic steering wheel
    • Sun visor
    • Heater and defroster with variable speed fan
    • Secondary steering – electro hydraulic
    • Combined gear selection and eject control lever
    • Machine operation monitoring system includes:<br>– Action lamp<br>– Engine oil pressure<br>– Primary steering system<br>– Left and right turn signal<br>– High beam<br>– Coolant temperature<br>– Tachometer<br>– Parking brake<br>– Fuel level<br>– Transmission oil temperature<br>– Brake system<br>– Transmission hold<br>– Hoist control<br>– Hydraulic system<br>– Charging system<br>– Retarder<br>– Transmission fault<br>– Traction control system<br>– Check engine lamp
    • Liquid Crystal Display (LCD):<br>– Alert indicator<br>– Selected gear and direction<br>– Speed or auto shift<br>– Review Operation and Maintenance Manual (OMM)<br>– Primary steering failure<br>– Seat belt warning<br>– Secondary steering failure<br>– DPF regeneration filter<br>– Machine Security System (MSS)<br>– Secondary steering energy source engaged<br>– Hour meter<br>– Retarder active
    • Window blinds
    • Glass windows: laminated and tinted-front toughened and tinted-sides and rear
    • Touch screen display incorporating the rearview camera video feed
    • Seats:<br>– Fully adjustable, air suspension, heated/cooled<br>– Padded trainer with lap belt
  • CAT TECHNOLOGIES
    • Product Link: PL631 (satellite) or PL641 (cellular) dependent on location and licensing agreement
    • Cat Detect with Stability Assist
  • ELECTRICAL AND LIGHTING
    • Batteries (two) maintenance free
    • Electrical system: 24 volt, 5A 24- to 12-volt converter
    • Horn
    • Lighting Systems:<br>– Cab interior<br>– Two head lamps<br>– Two width marker<br>– Two reversing<br>– Work light<br>– Two stop/tail lights<br>– Front and rear direction indicators
    • Main disconnect switch
    • Remote starting receptacle (cables not included)
  • POWER TRAIN
    • Auto shift nine-speed forward and two reverse transmission
    • Cat C18 engine
    • Differentials: standard with automatic clutched inter and cross-axle differential locks
    • Dual circuit oil immersed, enclosed brakes – all wheels
    • Retarder: engine compression brake
    • Three axle, six-wheel drive
  • SAFETY
    • Reverse alarm
    • Rearview camera
    • ROPS/FOPS cab
  • GUARDS
    • Rear window
    • Radiator
    • Crankcase
    • Axle
    • Front dump body spill guard, integral part of fabricated body
  • OTHER STANDARD EQUIPMENT
    • Mud flaps: wheel arch and body mounted with transportation tiebacks
    • S·O·S sampling valves
    • Tires, six 29.5R25, radial
    • Vandalism protection: lockable caps for fuel tank and hydraulic oil tank

Optional Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • OPTIONAL EQUIPMENT
    • Auto lube installation for automatic greasing of bearings
    • Body liners
    • Bluetooth radio stereo system
    • Cat Production Measurement payload monitoring system
    • Cold weather coolant –51° C (–60° F)
    • Cold weather start attachment
    • Engine block heater
    • Ether start
    • Exhaust heated body
    • Fast fuel fill
    • Fender extension
    • Flashing LED beacon
    • Four point seat belt
    • Fuel additive – anti-waxing
    • Heated rearview motorized mirrors
    • Machine Security System (MSS)
    • Product Link Elite: PLE631 (satellite), PLE641 (cellular)
    • Roof mounted High Intensity Discharge (HID) work lights
    • Sound suppression
    • 875/65 R29 wide tires

View 360